138WE/L-90/2025-26

Amount

REPAIR TO SOFA SET 5 SEATER, FD-281

Removing of existing U/S cushion from back seat an bottom seat of sofa set five seater and supply & fix new foam cushion of size 560mm x530mm x 95 to 100 mm thick 32 density duly covered with superior quality tapestry cloth as approved by GE (Not less than Rs. 350/ Mtr) complete all as specified and/or as diected by Engr-in-Charge.

Removing of existing old unserviceable front leg from sofa set 5 seater and S & F new leg of seasoned teak wood duly polished to match existing surfaces complete all as specified and/or as diected by Engr-in-Charge.

All as per item No 1.02 above, but rear leg.

All as per item No 1.02 above, but side rail.

All as per item No 1.02 above, but long rail of 3 seater.

All as per item No 1.02 above, but wooden bearers.

All as per item No 1.02 above, but wooden battens.

Preparation of exposed surface of sofa five seater by scrubbing with required grit paper/emery paper and applying of single coat of putty to make the surface even and apply required coats of french polish, complete all as specified and/or as diected by Engr-in-Charge.

REPAIR TO SOFA SEAT SINGLE SEATER, FD-281

Removing of existing U/S cushion from back seat and bottom seat of sofa seat single seater and supply & fix new foam cushion of size 560mm x 530mm x 95mm to 100 mm thick 32 density duly covered with superior quality tapestry cloth as approved by GE (Not less than Rs.350/ Mtr), complete all as specified and/or as directed by Engr-in-Charge.

Removing of existing old unserviceable front leg from sofa set single seater and supply & fix new leg of seasoned teak wood duly polished to match existing surfaces as per drg and complete all as specified and/or as directed by Engr-in-Charge.

All as per item No 2.02 above, but rear leg.

All as per item No 2.02 above, but rail.

All as per item No 2.02 above, but wooden bearers.

All as per item No 2.02 above, but wooden battens.

Preparation of exposed surface of sofa seat single seater by scrubbing with required grit paper/emery paper and applying of single coat of putty to make the surface even and apply required coats of french polish and complete all as specified and/or directed by Engr-in-Charge.

REPAIR TO SOFA SEAT SINGLE SEATER, TP

Removing of old unserviceable tapestry including foam cushion from back seat and bottom seat of sofa chair single seater and supply & fix new upholstry of superior quality including foam cushion 100 mm thick 32 density duly covered with superior quality tapestry cloth as approved by GE (Not less than Rs.350/ Mtr) and complete all as specified and/or as directed by Engr-in-Charge.

Removing of old unserviceable tapestry including foam cushion from Arms of sofa chair single seater and supply & fix new upholstry of superior quality including foam cushion of colour and size as apporved by GE (Not less than Rs.350/ Mtr) complete all as specified and/or as directed by Engr-in-Charge.

Removing of old unserviceable legs and supply & fix new legs seasoned teak wood all as specified and directed.

Material & Labour for preparation of wooden surface of sofa chair single seater by scrubbing with grit/ emery paper to smoothen the surface and apply one or more coats of French polish of required shade and complete all as specified and/or diected by Engr-in-Charge.

REPAIR TO SOFA SET 3 SEATER, FD-281

Removing of existing U/S cushion from back seat and bottom seat of sofa set three seater and supply & fix new foam cushion of size 560mm x530mm x 95mm to 100 mm thick 32 density duly covered with superior quality tapestry cloth as approved by GE (Not less than Rs. 350/ Mtr) complete all as specified and/or as directed by Engr-in-Charge.

Removing of existing old unserviceable front leg from sofa set 3 seater and S & F new leg of seasoned teak wood duly polished to match existing surfaces as per drg complete all as specified and/or as directed by Engr-in-Charge.

All as per item No 4.02 above, but rear leg.

All as per item No 4.02 above, but side rail.

All as per item No 4.02 above, but long rail of 3 seater.

All as per item No 4.02 above, but wooden bearers.

All as per item No 4.02 above, but wooden battens.

Preparation of exposed surface of sofa set three seater by scrubbing with required grit paper/emry paper and applying of single coat of putty to make the surface even and apply required coats of french polish complete all as specified and/or as directed by Engr-in-Charge.

REPAIR TO SOFA SET 2 SEATER, FD-281

Removing of existing U/S cushion from back seat and bottom seat of sofa set two seater and supply & fix new foam cushion of size 560mm x 530mm x 95 to 100 mm thick 32 density duly covered with superior quality tapestry cloth as approved by GE (Not less than Rs. 350/ Mtr) complete all as specified and/or as directed by Engr-in-Charge.

Removing of existing old unserviceable front leg from sofa set two seater and supply and fix new leg of seasoned teak wood duly polished to match the existing surface as per drg complete all as specified and/or as directed by Engr-in-Charge.

All as per item No 5.02 above, but rear leg.

All as per item No 5.02 above, but side rail.

All as per item No 5.02 above, but long rail of two seater.

All as per item No 5.02 above, but wooden bearers.

All as per item No 5.02 above, but wooden battens.

Preparation of exposed surface of sofa set two seater by scrubbing with required grit paper/ emery paper and applying of single coat of putty to make the surface even and apply required coats of french polish and complete all as specified and/or as driected by Engr-in-Charge.

REPAIR TO 3 SEATER LOUNGE SOFA, TP

Removal of existing U/S rexine cloth including foam cushion 25mm thick from bottom seat of three seater lounge sofa and supply & fixing three new foam cushion 25mm thick 32 density duly covered with sperior quality rexine cloth of size and colour as approved by GE and complete all as specified and/or as directed by Engr-in-Charge.

Removal of existing U/S rexine cloth including foam cushion 25mm thick from back of three seater lounge sofa and supply & fixing three new foam cushion 25mm thick 32 density duly covered with sperior quality rexine cloth of size and colour as approved by GE and complete all as specified and/or directed by Engr-in-Charge.

Removing of existing old unserviceable steel legs of 3 seater lounge sofa and supply & fix new legs as per existing size existing pattern made of chrome plated steel with steel gas welding complete all as specified and/or as directed by Engr-in-Charge.

CHARPOY GI PIPE PLY WOOD TOP, FD-220

Removing of old unserviceable ply wood commercial plywood and supply & fix new ply wood commercial 12 mm thick BWR ISI marked using nut, bolt and washers including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing complete all as specified and/or as directed by Engr-in-Charge.

Removing of unserviceable MS flat iron strip of size 900x32x5mm and supply & fix of new MS flat iron strip of charpoy GI Pipe duly painted black complete all as specified and/or as directed by Engr-in-Charge.

Removing of unserviceable elbow of charpoy GI pipe and supply & fix three way GI elbow 32mm medium grade ISI marked complete all as specified and/or as directed by Engr-in-Charge.

Removing of unserviceable check nut of GI Charpoy and supply & fix new check nut 32mm bore 6mm thick suitable for charpoy GI pipe 32mm bore complete all as specified and/or as directed by Engr-in-Charge.

Material & Labour for removing the threadless/broken long rails from charpoy GI pipe 32mm and supply & fix new long rail of 32mm dia GI pipe medium grade 1.88 m long threaded at both ends and fixed to existing three way elbow 32mm dia and all shown on drawing complete all as specified and/or as directed by Engr-in-Charge. (GI pipe make : TATA /Jinda/Surya).

Taking out existing old broken short rail from charpoy GI 32 mm dia and providing in position 1 No short rails made out of broken long rail obtained from taking down above item No 7.05 including threading on both ends complete all as specified and shown on drg (Note : U/S check nuts to be replaced are included in the quoted rates)

Taking out existing old broken legs from charpoy GI 32mm dia and providing 01 No new leg in position made out of old broken short rail obtained from taking down of item No. 7.06 above including S & F 3mm thick and 40 mm dia MS plate welded at bottom of leg including threading on top and painting of MS plate with two coats of synthetic enamel paint over a coat of oxide primer all as shown on drawing complete all as specified and/or as directed by Engr-in-Charge.

CHARPOY HARD TOP, FD/MAP-II/01

Removing of existing unserviceable ply top and replacement with new plywood commercial 12mm thick of size 1980x900mm ISI marked with 10 Nos 65mm round head nuts and bolts with washer to the frame complete all as specified and/or as directed by Engr-in-Charge.

Repairs to broken mild steel components (Stiffener and MS Cleat welded to the frame) of Charpoy hard top with welding.

Removing of existing paints by scrubbing the surface with emery paper and wire brush so as to make the surface clean and apply one coat of primer and spray painting with black colour synthetic enamel paint to required finish complete all as specified and/or as directed by Engr-in-Charge.

Removing of existing old unserviceable rubber shoe of charpoy hard top and supply & fix new rubber shoe of existing size complete all as specified and/or as directed by Engr-in-Charge.

TABLE OFFICE CLERK STEEL, FD-1104/FD-84(M)

Taking out U/S Top from Table office clerk steel and supply & fix new top of size 1200 x 610mm 18/19 mm pre-laminated particle board exterior grade ISI marked with 4 mm thick teak wood beading all-round of the top as specified and shown on drg complete all as specified and/or as directed by Engr-in-Charge.

Taking out unserviceable locks and supply & fix new brass locks after repairing of drawer of table office clerk steel, size and shape as per Drg complete all as specified and/or as directed by Engr-in-Charge.

Taking out old U/S drawer and supply & fix new drawer made of 1mm thick MS Sheet all as shown on Drg complete all as specified and/or as directed by Engr-in-Charge.

Removing of existing old unserviceable rubber shoe of Table office clerk steel and supply & fix new rubber shoe of existing size complete all as specified and/or as directed by Engr-in-Charge.

Material & Labour for providing two coats of olive green or silver grey paint (spray painting) over a coat of red oxide primer after preparation of surface by scrubing / scraping / denting complete all as specified and/or as directed by Engr-in-Charge.

REPAIR TO DOUBLE BUNK STAINLESS STEEL WITH MATTRESS, TP

Removing of existing u/s mattress from upper part or lower part of double bunk steel and supply & fix new mattress size (LxW: 6'-3''X.3'),and 100 mm thick single 32 density coir Mattress.

Removing of existing old unserviceable front leg or rear leg from double bunk steel and supply & fix of new leg of GI complete all as specified and/or as directed by Engr-in-Charge.

Removing of old unserviceable long rail and supply & fix complete fitting and welding all as specified and/or as directed by Engr-in-Charge.

Removing of old unserviceable short rail and supply & fix of new short rail, complete fitting and welding all as specified and/or as directed by Engr-in-Charge.

VEE KAY IND (BID ID -3361491)

DIXON ENGINEERING (BID ID -3362524)

sharma trader (BID ID -3368875)