REPAIR OF WOODEN FURNITURE, SOFA SETS AT FURNITURE YARD UNDER BSO OF GE JAIPUR

Amount

Teapoy wooden (1.01 to 1.03) : Removing of old unserviceable wooden part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum, size, shape & design as shown on drg . All new surfaces shall be two coat of french polish with high gloss finish.including tightening the joints by pinning, screwing, nailing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : 278, 382

Side Rail

Front/back rail

Table 3'x2' with or without drawer (2.01 to 2.07): Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing and placing every part intact. All new surfaces shall be two coat of french polish with high gloss finistall as specified in drg and directed by Engr-in-charge. Drg No. : 283, 284

Front/rear rail

Side rail

Middle stiffeners

Side stiffeners

Bottom ply of drawers (commercial ply woods of size 550mm x 310mm x 6mm).

Side members of drawer

Table 4 x 3 (3.01 to 3.03): Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, All new surfaces shall be two coat of french polish with high gloss finish and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD/MAP-II/-03

Front/back rail

Side rail

Table dining 6 person (4.01 to 4.03): Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing. All new surfaces shall be two coat of french polish with high gloss finish and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD-239, 269, 273, FD/Map-II/03

Front/back rail

Side rail

Table dining 8 person (5.01 to 5.03) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD-239, FD-273,FD-376

Front/back rail

Side rail

Table writing (6.01 to 6.07) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood )Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD-249, 275

Front/ back rail

Bottom base of box 18mm thick commercial particle board (ISI marked)

Back ply box 6mm thick commercial ply (ISI marked)

Front door 18mm pre-laminated particle board including knob and hinges piano type continuous.

Bottom of drawer 6mm thick commercial ply (ISI marked) of size 600mm x 450mm .

Knobs 50mm of chromium plated of approved coloured and standard quality.

Table 3x3 (7.01 to 7.03) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD-88M, 291

Front/side rail

Table Peg (8.01 to 8.04) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood)Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD-25, 277, 384, 236

Front rail

Side rail

PVC Shoes (4 nos in one chair)

Table Centre(9.01 to 9.04) Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD-274, 134(M), 235,267,393

Front/rear rail

Side rail

PVC Shoes (4 nos in one chair)

Chair WB (10.01 to 10.07) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD-285

Stiffener

Front/Side/ rear rail

Back Support

Front leg

Rear leg

PVC Shoes (4 nos in one chair)

S&F Plywood 6 mm thick BWR grade ISI marked as per drg

Chair Easy with cusioned (11.01 to 11.08) : Drg No. : FD-358

Taking out unserviceable seat of Chair Easy cusioned and S&F new seat 12mm, teak ply with ploy urethane foam 75mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

Taking out unserviceable back of Chair Easy cusioned and S&F new back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

Stiffener

Front/Side/ rear rail

Back Support

Front leg

Rear leg

PVC Shoes (4 nos in one chair)

Sofa Set (12.01 to 12.06) Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) Hollock/Bonsum size and shape as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD-373, 281

Side planks of sofa seat

Bottom planks of sofa set

Handle of single seat

SOFA SETs . Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of 'cool' foam of 40 density 530 mm x500 mm covered with best quality of tapestry cloth Make - Sleepwell/Kurlon all as shown on drgs and as approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.250/Mtr

Removing of old unserviceable tapestry cloth from cushion of sofa set and S&F new tapestry cloth and stitched on cushion as shown on drawing. Tapestry cloth should not be less than Rs.250/Mtr

Table Bed Side (13.00 to 13.02): Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) and both side pre laminated particle board 18mm thick ISI marked including teak wood edging duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD-248,FD-276

Top/middle/bottom shelf

Sides pane including legs

Side board (14.01 to 14.05) Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) and both side pre laminated particle board 18mm thick ISI marked including teak wood edging duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD-241, 371, 372

Back side 6mm thick commercial ply wood (ISI marked)

Shutter fixed with piano type hinges continuous 20mm.

Knobs 50mm of chromium plated of approved coloured and standard quality.

Top base

Sides pane including legs

Table dressing (Ladies) : Removing of unserviceable part of furniture and supply and fixing new part made out of 1st class hard wood teak duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make the serviceable item and removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5.5mm thick of clear vision (Make : Modiguard, Saint Gobin) with 6mm thick ply fixed at back and Teak ply all three side. Drg No. : FD-251, 378

Table dressing (Ladies) : Removing of unserviceable part of furniture and supply and fixing new part made out of 1st class hard wood teak duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make the serviceable item and removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5.5mm thick of clear vision (Make : Modiguard, Saint Gobin) with 6mm thick ply fixed at back and with MDF Board all three side. Drg No. : FD/E6/MAP/16

Table dressing gents: All as per item No 21.00 above but Removing existing U/S mirror with ply and S/F new mirror 5.5 mm thick of clear vision (Make : Modi Guard) with 6mm ply on back . Drg No. : FD-230,379

Polishing description (for 18.01 to 18.19) : M&L preparation of wooden surfaces by cleaning, scrapping through electric grinder and smoothing of surfaces with sand paper and applying one coat of French polish on the wooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing

Teapoy wooden Drg No. : FD-278, 382

Table 3'x2' with drawer Drg No. : FD-284

Table 3'x2' without drawer Drg No. : FD- 283

Table dining 4’ x 3’. Drg No. : FD-273

Table dining 6 person Drg No. : FD-239, 269, 273, FD/Map-II/03

Table dining 8 person Drg No. : FD-239,FD-273,FD-376

Table writing Drg No. : FD-249, 275

Table 3x3 wooden Drg No. : FD-88M, 291

Table Peg Drg No. : FD-25, 277, 384, 236

Table Centre Drg No. : FD-274, 134(M), 235,267,393

Chair WB without arms Drg No. : FD-285

Table Bed Side wooden Drg No. : FD-248,FD-276

Side board Drg No. : FD-241, 371, 372

Bed with plytop Drg No. : FD-246 & 247

Table dressing (Ladies) Drg No. : FD-251,378,

Table dressing gents Drg No. : FD-230,379

Sofa set 5 seater. Drg No. : FD-281, FD-373

Sofa set 4 seater. Drg No. : FD-281, FD-373

Replacement of TOP (19.01 to 19.09): Taking out unserviceable top from Tables and S&F new top made out of 18mm thick pre laminated particle board exterior quality including 4mm thick teak wood edging al- around the top duly polished size shall be as shown on drg and as directed.

Teapoy wooden Drg No. : FD-278, 382

Table 3'x2' with or without drawer Drg No. : FD-284

Table dining 4’ x 3’. Drg No. : FD-273

Table dining 6 person Drg No. : FD-239, 269, 273, FD/Map-II/03

Table dining 8 person Drg No. : FD-239,FD-273,FD-376

Table writing Drg No. :FD-249, 275

Table 3x3 Drg No. : FD-88M, 291

Table Peg Drg No. : FD-25, 277, 384, 236

Table Centre Drg No. : FD-274, 134(M), 235,267,393

Repair description for Chair dining PVC (20.01 to 20.04):- Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No. : FD/MAP-II/05

Rear legs

Front legs

Front Side/rear/back rail

Side/Center stiffener

S&F seat for chair dinning size as per drg of 3mm thick weight not less than 0.39 kg Make - AMKO/COMFO best quality approved by GE and as directed. Drg No : FD/MAP/03,FD/MAP-II/05

M&L preparation of wooden surfaces by cleaning, scrapping through electric grinder and smoothing of surfaces with sand paper and applying one coat of French polish on the wooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing of Chair dinning.

Bed with plytop (23.01 to 24.06): Removing the existing unserviceable / broken parts and S&F first class hard wood (Teak wood/Bonsum) new parts complete all as specified and shown on drgs shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge. Drg No : FD-246 & 247

Head board alongwith the legs

Footboard alongwith the legs

Centre stiffeners

Long rail for following size 35x90x1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles to be provided as directed by Engr-in-charge

Short rail

Removing of existing unserviceable ply wood and S&F new plywood BWR Grade Make: Gold from Greenply/Gold from Archidply/ Club Prime from Century Ply confirming to IS-710 of 1980mmx900mm.

M&L for ‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

shekhar & company

M/S Shri Balaji Enterprises