SPECIAL REPAIRS TO BUILDING NO T- 4A (COOK HOUSE) AT MH AND BLDG NO T-02 (TOOL STORE SECTION) OF ARTY STATIC WORKSHOP UNDER GE DEOLALI

Amount

Dismantling of Single layer Mangalore pattern or similar tiles in roofing complete all as specified.

Dismantling of battens for tiles, singles etc, of any size including tiling fillets exc 15 cm complete all as specified.

S&F Steel work in tubular/Hollow sectionincluding special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St. - 240. complete all as specified and directed.

Dismantling of timber scantling framed work 40sqcm and over in section in any position all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

M & L two coats of synthetic enamel paint of new steel surfaces over a coat of priming with red oxide over preparation of new surfaces.

Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed.

S & F powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 38mm x 1.5mm and cross Tee of size 38mm x 38mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and as directed.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed.

Demolition of Brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar.

M&L brick work with sub class B bricks, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size bricks.

All as per item no - 12 but except bricks complete all as specified.

Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc.

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:4 finished even and smooth ( without using extra cement ).

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6 finished even and smooth without using extra cement.

M&L preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of 1.50mm thick wall care putty all as specified.

M & L preparing plastered or unplastered new surfaceand applying two coats of cement base paint over a coat of cement primer on new wall plastered surfaces.

Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified.

M & L for Cement concrete as PCC 1:5:10 type E-2 using (40mm graded stone aggregate) as foundations,filling and mass concrete complete all as specified.

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping/hold fast bed blocks,bed plates,roof kerbs or mud stops, rounded or chamfered on edges or similar items including necessary form work stops moulds etc all as specified and directed

M & L for 2 nd class hardwood as glazed and skeleton shutters 35 mm thk open rebated and prepared to receive glass, gauze, etc (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutter as specified in SSR Part l, section 8, clause 8.24 ( a ); supplied and fitted to chowkats complete all as specified and as directed.

S&F in repair 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane

S & F in Repairs Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples Complete all as specified.

S & F 35 mm thick second class hardwood plain,framed,panelled shutters ( any number of panel ) with panels of timber flat on both sides (feather edged ) or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified.

M & L for Two coat of synthetic enamel paint of wooden surface over a coat of pink primer including preparation of new surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified.

Taking down chowkats or frames exc.1.5 sq.m but not exc. 4 sq.m each but with shutters ( without taking off shutters from the frame ) complete all as specified.

Taking down chowkats or frames n. exc.1.5 sq.m but with shutters ( without taking off shutters from the frame ) complete all as specified.

S & F Butt hinges, medium weight, stainless steel, and fixed 100 mm length complete all as specified.

S & F Butt hinges, medium weight, stainless steel, and fixed 75 mm length complete all as specified.

S & F Aluminium handles, cast type, anodised handle 150 mm complete all as specified.

S & F Aluminium handles, cast type, anodised handle 100 mm complete all as specified.

S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 150 mm complete all as specified.

S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 100 mm complete all as specified.

S & F 300 mm long MS helical door spring, inclunding roller and roller plate complete complete all as specified.

S & F 300mm aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

M&L for preparing old decorative plastered surface of walls by removal of existing treatment on walls washing down and applying two coats of cement base paint and colour shade as approved by Engr- in- Charge , (Pista green )

M&L for preparation of old decorated plastered/unplastered surfaces of wall including cornices etc by brooming down and applying two coat of white wash all as specified and directed by Engr.-in-charge.

M&L for preparing old decorative plastered surface of walls by removal of existing treatment on walls washing down and applying two coats of distemper oil emulsion incl 1.50mm thick wall care putty all as specified.

M&L for preparation of old painted wooden surfaces over 10cm width or girth and applying two coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted steel surfaces over 10cm width or girth and applying two coat of synthetic enamel paintall as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 15 mm dia pipe complete all as specified .

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 20mm dia pipe complete all as specified .

S & F 15 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

S & F 20 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

S & F in repairs 15 mm dia bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S & F 32 mm dia Low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified.

Dismantling floor ,hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises Complete all as specified.

M & L for screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes Complete all as specified.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete complete all as specified.

All as per item no - 50 but as a skirting incl rendering 10mm thick in CM 1:4 complete all as specified.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (Squre/Rectangular) are of each Tile Exc 0.06 Sqm but N exc 0.11Sqm in floors etc, set jointed and pointed in neat cement slurry and pointed in coloured cement to match in floors complete all as specified.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (Squre/Rectangular) are of each Tile Exc 0.18 Sqm but N exc 0.38Sqm in floors etc, set jointed and pointed in neat cement slurry and pointed in coloured cement to match in floors complete all as specified.

M&L Glazed ceramic coloured tiles of size. 350x250x7mm/450x350x7mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick screed bed in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

M&L Glazed ceramic coloured tiles of size. 300x200x7mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick screed bed in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

M & L for Granite (Ruby Red) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing types all as specified.

M & L for Machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified.

S&F 75mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

Demolition of cement concrete reinforced Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work

S&F factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed

All as per Srl item No. 62 here in before but without glazing bars all as specified and directed by Engineer - in - Charge.

S&F framed work such as grills, gratings, etc with ends of bars, shouldered and /or riveted, or forged into spicks, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tankd and similar work conforming to Fe 410-O all as specified.

M&L for 18mm thick plywood, grade BWR type BB fixed with screws to frame work complete all as specified and as directed.

M&L for decorative laminate type I,of surface finish ,colour and pattern as approved fixed with approved adhesive as per maker's instruction, 0.9mm thick laminate

S & F MS flat as in wind ties incl all cutting , bending drilling etc. complete conforming to Fe- 410 'O' or Fe- 310'O'

S&F 1.25mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified.

Blank

Demolition & breaking up of 150 mm dia of drain pipe (salt glazed stone ware AC or reinforced concrete) set in cement mortar.

S&F 110mm bore PVC(SWR) pipes single socketed in any length wilth rubber ring joints laid in floor or on walls complete all as specified

S&F 110mm bore PVC (SWR) bend any raidus

S&F PVC (SWR) Pipes 75 mm bore with rubber ring joints laid in floors or on walls or laid in trenches.

S&F 75mm bore PVC (SWR) bend any raidus

M&L for Plain Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in Coping and similar work all as specified

M&L for providing RCC (1:2:4) using 20mm graded stone aggregate as in coping, slab supported on wall, beam etc including necessory formwork as directed by Engrs in charge.

S & F 10mm dia TMT bars and over cut to lengthbent to shape required including craking bending, spirally for hooping for columns, hooking ends and binding with mild steel wire ( annealed) not less than 0.90mm dia of wire or secruing with clips all.

S& F in repairs PVC ( SWR ) floor trap plain with grating including jointing with solvent cement of 75 mm dia complete all as specified.

M & L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.

Dismantling asbestos ( corrugated or semi-corrugated etc ) sheets in roof coverings

Dismantling of plain or corrugated steel sheeting any guage thicness including Nainital or similar pattern roof covering.

S & F MS flat as in wind ties incl all cutting , bending drilling etc. complete conforming to Fe- 410 'O' or Fe- 310'O'

M & L for Clean sawn 2 nd class hard wood in scantling as a post and rafter complete all as specified.

M & L preparing plastered or unplastered new surfaceand applying three coats of White wash on new wall plastered surfaces.

S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 100 mm complete all as specified.

S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

M&L for prelaminated particle board 12 mm interior grade prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screw timber frame work Including dismantling board all as specified.

S&F in repair 5.5 mm thick Sheet glass, ordinary quality and glazing with aluminium clips/beadig/ cleats with rubber gasket.

Anodised aluminium doors, shutters, side hung type with sash bars, locking rails, locking arrangements and hydraulic door closing arrangement including necessay joinery cleats, glazing clips, rubber packing, howkats aluminium snap beading, screws, suitable handle etc with and including tintet sheet glass or ordinary glasing quality of 5mm thick size of lock rails 44.45x81.50mm side rails 85x44.45mm top rail 83.5x44.45mm, bottom rail 101.6x44.45mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member 1.40mm thick complete all as specified in MES SSR-1991, Part-I clause 10.37.

Taking down unserviceable carefully copper/aluminium point wiring (light, fan, socket or power) complete with teak wood battens including fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc. but excluding fan regulators, tube light fittings and sketch fittings and making good disturbed surfaces of walls, floor etc.complete all as directed.

Material and labour for point wiring with stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for :-

(a) One light point controlled by one switch.

(b) One fan point controlled by one switch with cable 1.5sqmm size

(c) One 5 pin socket outlet 5 Amp on same board

(d) One 5 pin socket outlet 5 Amp on independant board

All as per item No- 90 above but One 15 A socket outlet independent with 4 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specied .

Supply and fix switch socket combination 5 pin 5 Amps flush type (multi purpose ) complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 5/6 pin, 5 and 15 amp flush type universal complete all as specified and as directed.

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S & F in replacement of lamp angle/batten holder Bakelite with CFL 20 Watt complete all as specified and as directed.

S & F fan regulator 450 watts electronic type for ceiling fan of size 900 mm to 1400 mm sweep working on 230 Volts AC supply with all necessary connections etc complete

S&F Bulk head in die cast aluminium housing & frosted glass having 8W CFL Make:-Havells Cat Part Num:LHKL01160099 ,C.G,Wipro or equivalent as approved by GE.

S & F of Recess mounting 34W LED 6000K luminaire fixture diffused suitable for ceiling size 2'X2'(Feet) (580X580 mm), fixture size (595X595 MM) armstrong / grid/ POP Ceiling with separate eletronic driver & High brightness LEDs including required accessories and eletric connections complete all as specified and as directed. Make : Havells cat part No: PLUTONEO2X2PLR34WLED857S or equivalent in Wipro/Philips

S&F Decorative wall light madeup of high grade engineering plastic material suitable for retrofit Make:-Havells LHFOGB1TZ1W035

S&F LED Bldg Security light Endura City liner uber having long life versalite pressure die-cast aluminium IP66 roadway luminaries with high power 20W LED as light source with acrylic cover Make:-Havells LHEWEBP7PL6S020

M & L for bracket made out of GI tubing 40mm dia,light grade 1.5 mtr long including fixing with MS clamps -2 Nos made out of 50mm wide 5mm thick flat iron with M.S. nuts, bolts 75 mm long 12 mm dia -4 Nos & flat washer (3mm thick) 01 No. for each including preparation of steel surfaces and painting with two coats of aluminium paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and as directed.

S&F Surface and wall mounted LED Fitting with extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver 20W LED fitting Make:-Havells model Endura linear neo,C.G,Philips or equivalent

S&F sheet metal enclosure for SPN DBs 8 way double door built in bus bar 240V, AC, 50Hz, complete all as specifide and directed.Make: L&T (Cat No DBSPN012DD) /Legrand/C&S/Havells.

S&F MCB SP 240 V, 5-32 Amps, 10KA, 'C' Series, of make Legrand, Cat No 4085-87 to 90,92,93,94,95 or equivalent

S&F MCB SPN, 240 V, 32-63 Amps, 10KA, 'C' Series, of make Legrand, Cat No 4086-17 to 20 or equivalent

S&F PVC Conduit pipe of 20mm size all as specified and directed.

Earthing complete with galvanised Mild steel earth plate electrode size 600 x600x6 mm thick buried directly in ground (preferably in vertical position earth pit not less than 2.25 mtr below normal ground level with top edge of the earth plate not less than 3 mm (BGL) connected to galvanised iron strip 32x6mm as earthing lead by means bolts, nuts check nuts including PCC pit in RCC 1:2:4 type B-I, 20 mm bore medium grade, GI water tubing fixed with CI funnel wire mesh 15 mm light grade for protection pipe including charcoal common salt complete all as specified in EP No 3 of SSR -2009 Part-I connected to test point complete all as specified.

M/S MANISH CONSTRUCTION CO

M/S GURBAX AND CO

Alpha Construction

JEET CONSTRUCTIONS CO.

M/S SAMEER SUBHASH PATANI

M/S B R BHALERAO

J Sams Contructions

M/s M R MAHANA