REPAIRS TO JOINERY FLOORING SANITARY FITTINGS AND PLINTH PROTECTION ETC FOR MD ACCN OF NP GNC MC AND RHM LINES UNDER AGE B AND R II OF GE CENTRAL BANGALORE

Amount

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etcand removal of entire debris as ordered outside MD land complete all as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level and removal of entire debris as ordered outside MD land complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of debris to a distance not exceeding 50 mts and depositing where directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside MOD land complete all as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc., laid, bedded and pointed in any mortar complete all as specified & as directed

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed.

Taking down chowkats or frames exc 1.5 but not exc 4 Sqm sqm each with shutters (without taking off shutters from frame) and stacking at site where directed.

Taking down shutter of any description area exceeding 1 Sqm but not exceeding 2 Sqm each and refixing in the same opening after cutting , easing and adjustmentas with old ll types of builders hardware complete all as directed.

Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each and stacking at site where directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as directed.

Demolition and breaking up 75/100mm bore drain pipes, salt glazed stone ware set in cement mortar including PCC haunching and bedding, complete.

M & L for PCC 1 :5 : 10 type E2 using 40 mm graded crushed stone aggregate as in foundation filling, unken repairing & mass concrete complete all as specified and directed

M & L for PCC 1 :3 : 6 type C1 using 20 mm graded crushed stone aggregate as in hold fasts etc concrete complete all as specified and directed

M&L factory made pre cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified.

Supply only Integral Water Proofing Compound (ISI Marked) of Make : CICO , Acco Proof , Impermo , Aqua flex as approved.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified & directed

S&F factory made pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness, including filling hollow chowkat frame with plain cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate to the satisfaction of Engineer-in-chatge complete as specified & as directed.

All same as per item No 18 here-in-above but steel frames of size 125 x 60 mm -do-

S&F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.

S &F 35 mm thick second class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (a) supplied and fitted to chowkats.

S&F 30mm thick Flush shutters, veneered solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack all as specified.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed..

S & F150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S & F in repair150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S&F150 mm size butt hinges, medium weight cold rolled mild steel and fixed .

S&Fin repair 150 mm size butt hinges, medium weight cold rolled mild steel and fixed .

S&F 150 mm size aluminium alloy handles (ISI Marked) cast type anodised and matt finish not less than Gd AC 10 of IS: 1868 :1986 fixed.

S&F in repair 150 mm size aluminium alloy handles (ISI Marked) cast type anodised and matt finish not less than Gd AC 10 of IS: 1868 :1986 fixed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F in repair 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F in repair 25mm dia Aluminium powder coated curtain rods/ towel / ward robe rod etc all as specified and directed.

S&F in repair Aluminium powder coated brackets for curtain/Towel/ Ward robe hanging rodall as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long be-tween flanges complete all as directed including taking down old towel rail.

S&F in repairs stainless steel wire cloth, 0.24mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including supply & fix second class hard wooden fillet, wrought, cross sectional area exceeding 3 Sqcm but n.exc 6 Sqcm fixed with nails complete all as directed.

S&F stainless steel wire cloth 0.24 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples including supply & fix second class hard wooden fillet, wrought , cross sectional area exceeding 3 Sqcm but n.exc 6 Sq cm fixed with nails complete all as directed.

S&F Powder coated ( powder coated of any colour as approved ,thickness or powder coating not less than 50 micron) anodised aluminium windows sliding windows with frame jointing cleat for fixing etc & aluminium andised skeleton windows & shutters fixed with glass or guage sliding type (three track frame section exc 0.98Kg/m) without using sash bars using standard aluminum section (shutter section weight not less than 0.45 Kg/Rm) jointing cleats , glazing clips , rubber packings, anodised alumnum snap , beading screws , anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc complete all as specified & as directed.(Note : The quoted rate is deemed to be inclusive of rubber beading , fittings such as handles , stainless steel adjustable friction saty hinges).

S&F Powder coated ( powder coated of any colour as approved ,thickness or powder coating not less than 50 micron) anodised aluminium ventilators / louvers with frame jointing cleats for fixing etc and aluminium anodised fixed with glass or guage without using sash bars using standard aluminium section jointing cleats , glazing clios , rubber packing, anodised aluminium snap , beading screws etc . complete all as specified & as directed(Note : The quoted rate is deemed tpo be inclusive of cost of rubber beading & necessary fittings).

S&F mild steel framed work as in grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors and similar work including welding conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

M&L for applying evenly two coats of blown type hot bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.005 cum per sqm complete all as specified & as directed.

M&L for 40mm thick plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in floor and finished the even and smoth without using extra cement complete all as directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in floor and finished the surface suitable to receive floor tiles complete all as directed.

M & L for 75 mm thick plain cement conctere 1: 3 : 6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection finished the surface fair and even complete all as directed.

M & L non-skid coloured joint free ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified.

M&L glazed ceramic designer tiles any shade or pattern as approved of size 350x250x7mm / 450x350x7 mm thick, on verticals surfaces, set and jointed in neat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed. (Note for item Nos 44 & 45 : i) Quoted rate is deemed to be inclusive of cement screed. ii) Shade / pattern / Colour of tiles shall be got appproved before procurement).

M&L for 18-20mm thick Sadherhali stone slab flooring, steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit laid over and including 15 mm thick screed bedding in cement mortar 1 : 4including Rounding to edges complete

All same as per item No 46 here - in - above but as in dado & skirting with 10 mm thick 1 : 3 cement mortar screed - do -(Note for item No 46 & 47 : i) Quoted rate is deemed to be inclusive of cement screed.)

M & L rendering 15 mm thick in two coat ie., 10mm thick under coat in CM 1:4 and 5 mm thick finishing coat in CM 1:4 mixed with WPC finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on brick work/ block concrete surface finished the surface even and smooth without using extra cement complete all as specified.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface as in ceiling,chajja,roof projection etc. finished the surface even and smooth without using extra cement complete all as specified.

Three coats of white wash on newly plastered surface of ceilings after necessary preparation of surface complete all as directed.

M&L preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer over a coat of 1-2 mm thick external wall care putty as ordered complete all as specified.complete all as directed.

M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 1-2 mm thick wall care putty as ordered complete all as specified.

Hacking out old broken glass (any thickness) and size from wooden frame glazed with putty or fixed with wooden beads and removal of debris to a distance n.exc 50 mtr and depositing where directed.

S&F sheet glass 4mm thick glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

S&F in repairs sheet glass 4mm thick glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

S&F sheet glass 4mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

M & L Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation of new steel surface complete all as directed.

M & L Two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as directed.

Taking down old rusted / wornout 25 mm bore GI tubing after necessary disconnection & S&F new 25 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ceiling or laying in floors making necessary connection& testing on completion complete all as directed.

Taking down old rusted / wornout 20 mm bore GI tubing after necessary disconnection & S&F new 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed on walls/ceiling or laying in floors making necessary connection& testing on completion complete all as directed.

S&F in repair 15 mm bore bib taps cast copper alloy with crutch or butterfly handle,screwed down complete all as specified and directed

S&F in repair 15 mm bore stop valves cast copper alloy with crutch or butterfly handle,screwed down fancy type complete all as specified and directed

S&F in repair 15 mm bore stop valves cast copper alloy with crutch or butterfly handle,screwed down fancy type with long shank and cup complete all as specified and directed

S&F in repairs brass chromium plated shower rose 125 mm dia with or wihout swivel joint, any size, including fixing to steel pipe or union.Make : Prayag or equivalent as approved.

S&F SS Soap dish holder complete all as specified and directed.

S & F in repair 110 mm bore, PVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.

S & F in repair 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints laid in trenches complete all as specified and directed.

S & F in repair 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes or for rain water pipe in any length without ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed.

S & F in repair 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes or for rain water pipe in any length without ears, with rubber ring joints fixed to wall using MS holder bat complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S&F PVC (SWR) branch piece single,(single Y) 75 mm dia equal or unequal with oval access door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (single ‘T’), equal or unequal with access door

S&F 75 mm bore PVC (SWR) junction single (single ‘T’), equal or unequal with access door

S&F in repair 75 mm size PVC (SWR) floor trap with grating including jonting the same with solvent cement complete all as directed.

All same as per item No 76 here-in-above but multi flor trap -do-

S&F 550 mm X 400 mm size white flat back vitreous china wash hand basin including chromium plated pillar tap cap stain head suitable for 15 mm bore of pipe , PVC connection 15 mm dia 45 cm long with chromium plated nuts and bolts and suitable washers, PVC waste 32 bore CP waste coupling chain and plug , porcelain stopper including CI bracket fixed in repair complete all as diirected.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or cutting and fixing into granite platform including fixing cantilever brackets and connecting union to pipe overall size 915 x 460 mm bowl size 410mm x 330mm x 150mm complete all as directed

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, ‘P’ or ‘S’ trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified

S&F in repairs 20 mm ball valves, high pressure with polyethylene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs 25 mm ball valves, high pressure with polyethylene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M.Z.BUILDERS

M AND V ENTERPRISES

SHIVAA CONSTRUCTIONS

docileworx