REPAIR OF STEEL CHAIRS AT JAIPUR MILITARY STN

Amount

Chair Verandah(Item No 1.01 to 1.05)

M&L welding to chair verandah where required and filling properly at places of welding point. Welding shall be done all round the conduit pipe and all welding and filling at one broken point shall be measured as one point ie one unit. (Drg No. FD-256, 359)

M&L 04 nos of hard rubber toe in legs of chair verandah including removal of broken rubber toe. (Drg No. FD-256, 359)

M&L scrapping of surface of chair verandah frame with emery paper making smooth surface and applying one coat of white synthetic enameled paint all as directed. (Drg No. FD-256, 359)

S&F of PVC seat for chair varavdah (MAP) size as per drg of 4mm thick weight not less than 1.85 Kg. Make - AMKO/COMFO and best quality as approved by GE and as directed. (Drg No FD/MAP/12)

S&F of PVC back for chair varavdah (MAP) size as per drg of 4mm thick weight not less than 1.85 Kg . Make - AMKO/COMFO and best quality as approved by GE and as directed. (Drg No FD/MAP/12)

Chair CB Steel with/without arms (Item No 2.01 to 2.08) (Drg No. FD-75M)

Taking out old unserviceable seat frame of chair CB steel with Arms and S&F new black painted seat frame 2nd class hard wood duly weaving with white/cream plastic cane 2mm to 2.5mm wide partially rounded off of approved quality Godrej pattern cross band and border as specified in drawing including fixing with MS nut and bolt with washer, size of seat frame as per drg.

All as per Item No 2.01 above but back frame of chair CB steel with arms size as per drg.

All as per Item No 2.01 above but seat frame of chair CB steel without arms size as per drg.

All as per Item No 2.01 above but back frame of chair CB steel without arms size as per drg.

S&F black painted hand rest of Chair CB Steel with arms size as per drg

M&L welding of 4 nos of clits of 3mm thickness to support seat frame of Chair CB steel with or without arms

M&L scrapping of surface of chair CB steel with arm by emery paper making smooth surface and applying one coat of green/grey synthetic enameled paint all as directed.

M&L scrapping of surface of chair CB steel without arm by emery paper making smooth surface and applying one coat of green/grey synthetic enameled paint all as directed.

Chair Writing steel (Item No 3.01 to 3.03) (Drg No. FD/E6/MAP/12)

Taking out unserviceable seat of Chair writing Steel and S&F new seat 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

Taking out unserviceable back of Chair writing Steel and S&F new back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shadewith black pvc beeding including necessary nut bolts and washer.

Taking out unserviceable PU handle of Chair writing Steel and S&F new PU handle with screw/ Nut/bolts as per drg.

Chair Computer (Item No 4.00 to 4.06) (Drg No. FD/E6/ MAP/01)

Taking out unserviceable seat of Chair computer and S&F new seat 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

Taking out unserviceable back of Chair computer and S&F new back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

Removing of unserviceable castor from the chair computer revolving and S&F new castors as per drg and directed.

Removing of unserviceable PVC Base (5 legs) from the chair computer revolving and S&F new PVC base as per drg and directed.

Removing of unserviceable hydraulic assy from the chair computer and S&F new hydraulic assy with pvc couplings as per drg and directed.

Taking out unserviceable PU handle of Chair computer and S&F new handle with suitable screw/ Nut/bolts as per drg.

Chair school with hand rest:- (Item No 5.01 to 5.03)

Replacement of writing top made of 18mm thick pre-laminated MDF board of approved colour ISI marked 585mm x 500mm and fixing it to handle of chair by means of hinges 75mm all as per drg and as directed. (Drg No. FD/E6/MAP/05)

M&L welding where required and filling properly at places of welding point throughout in broken joints of frame including painting of replaced part of steel portion to match with existing as directed. one broken point shall be measured as one point i.e. one unit. Chair writing,CBA with hand rest,school with hand rest and table bed side (Drg No. FD/E6/MAP/12, FD-260, FD/E6/MAP/05, FD/E6/MAP/15)

Removing the useviceable PVC seat assy from chair school with hand rest and S &F new PVC Seat assy of superior quality as shown on drg and as aproved by Engr-in-charge. (Drg No. FD/E6/MAP/05)

Chair CB/CBA steel MH (Item No 6.01 to 6.03)

Taking out unserviceable seat of Chair CBA Steel MH and S&F new seat 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

Taking out unserviceable back of Chair CBA Steel MH and S&F new seat 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

M&L 04 nos of hard rubber toe in legs of chair CB/CBA Steel MH including removal of broken rubber toe.

Chair Easy steel/HFD (Item No 7.01 to 7.02)

Removing of unserviceable cloth rexene and foam cushion cloth of chair easy frame and supplying and fixing new Rexene/lining cloth/frame with cushion 40 density, 50mm thick as shown in drawing and as directed. Size of seat frame shall be 560mm x 535mm x 50mm.

All as per Item No 7.01 above but back frame of chair easy steel of size 560mm x 355mm x 25mm (thickness of foam cushion 50mm & 40mm density).

Chair revolving (Item No 8.01 to 8.06)

Taking out unserviceable seat of Chair Revolving and S&F new seat 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer. (Drg No. TP)

Taking out unserviceable back of Chair Revolving and S&F new back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer. (Drg No. TP)

Removing of unserviceable castor from the chair revolving and S&F new castors as per drg and directed.

Removing of unserviceable PVC Base (5 legs) from the chair revolving and S&F new PVC base as per drg and directed.

Removing of unserviceable hydraulic assy from the chair revolving and S&F new hydraulic assy with pvc couplings as per drg and directed.

Taking out unserviceable PU handle of Chair revolving and S&F new handle with suitable screw/ Nut/bolts as per drg.

Stool steel with backrest HFD 2007 (Item No 09.01 to 9.02) (Drg No. HFD-2007)

Removing unserviceable cloth rexene and foam cushion cloth of seat of stool steel frame and supplying and fixing new Rexene/lining cloth/frame with cushion 40 density, 50mm thick as shown in drawing and as directed.

Removing unserviceable cloth rexene and foam cushion cloth of back of stool steel frame and supplying and fixing new Rexene/lining cloth/frame with cushion 40 density, 50mm thick as shown in drawing and as directed.

Schedule of Credit

F.M. KHAN SONS

UNIVERSAL INFRAPROJECT PVT LTD

B.S Constructions

SK INDUSTRIES