REPAIR/ MAINT OF LT CABLE, NETWORK, EARTHING, LT POLE, STAY ASSEMBLY, LIGHTING CONDUCTOR, PAINTING OF POLE UNDER GE (MCTE) MHOW

Amount

Excavation in trenches in soft/ loose soil not exceeding 1.5 M wide and not exceeding 1.5 Mtr deep and getting out including filling bottom surface to required level or slope for laying of pipes/ cables complete all as specified and directed.

Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and directed.

Removing excavated surplus soil not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. Note : Punned thickness 18 cm shall be measured only.

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable including taking down old /broken bricks complete all as specified and directed.

M & L for bore hole for passing cable through/ insertion of 80/50mm dia GI pipe under PCC road/ bituminous road standing upto the depth 450mm to 1200mm by mechanical arrengment complete all as directed by Engineer-in-charge. Note:- (i) Cost of equipments, tools & plants, material required for boring shall be deemed to be included in unit quoted rates above. (ii) GI pipe 80/50mm dia shall be measured and paid separetely.

S &F for 50mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/ pole or laid in trenches under road crossing/ hard standing including taking out old/ unserveciable existing pipe complete all as specified and directed. Note:- Excavation and earth work shall be measured & paid separately.

S &F for 80mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/ pole or laid in trenches under road crossing/ hard standing including taking out old/ unserveciable existing pipe complete all as specified and directed. Note:- Excavation and earth work shall be measured & paid separately.

Disconnecting & dismentling of damaged/ unsv cable any type/ make and Supply & laying (in repair) cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor using lugs bothe end of cable & wrapping pvc tape over XLPE insulation cable and testing complete all as directed for following size:- (Note:- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid seperately)

(a) 35 Sqmm 3.5 core

(b) 50 Sqmm 3.5 core

(c) 70 Sqmm 3.5 core

(d) 95 Sqmm 3.5 core

(e) 120 Sqmm 3.5 core

(f) 185 Sqmm 3.5 core

(g) 240 Sqmm 3.5 core

Supply and errection of steel tubular pole swaged type 410-SP 31(9.0m long pole) as per IS:2713 (Part-I to III) 1980 complete with cast iron base plate, pole cap, mild steel bolt, nuts and screws complete including dismantling of exsiting pole all as specified including consisting of following works:- (a) Excavation in trenches not exceeding 1.5 mtr wide & 1.57 mtr deep for pole foundation & getting out in soft/ loose soil, returning filling in the excavated of soil after fixing the pole in foundation ramming earth around in layer not exceeding 25 cm thick and disposal of surplus soil to a distance not exceeding 50 mtrs complete all as specified and directed. (b) M&L for PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) in foundation 900mm x 600mm cross section and planting depth 1.5 mtr for concrete encasing the pole upto GL complete all as specified and directed. (c) M&L for providing PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) for plinth block/collar above GL 500mm high and 450mm dia complete all as specified and directed. (d) M&L for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coat of aluminium paint over a coat of red oxide primer including preparation of surface including painting of 30 cm wide bands 3 Nos with synthetic enamel paint of appropriate colour in alternate layer upto the height of 1.5mm above plinth block. (e) M&L for writing letter or figures (Block Roman, Italic as Indian) with thick synthetic enamel paint of apprised shade not exceeding 5 cm height including numbering of pole complete all as specified and directed. Note:- Manufacture's test certificate will be produced before execution work.

M&L for preparation of 9.00/11.00 mtr long steel tubular pole including cross arms, clamps of any length and shape for overhead line/ street light and painting with two coat of aluminium paint of including marking pole number in a 15cm dia yellow circle and zebra painting with three black & two yellow bends of 10 cm width by fluorescent paint, from coping of pole to 1.5m height on pole including applying one coat of white wash on coping with safety precaution complete all as specified & directed. Note:- All the instruments and T&P required for the above job shall be arranged by the contractor at site including Ladder, Safety Harness and cost of the above deemed to be included in the rates.

Supply and fixing in repair LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply and Fixing LED street light luminaires 60 watt with pressure die cast aluminium housing with heat resistant toughned glass and IP66 protection complete including connection on pole or building including taking down of old/ unserviceble street light fitting complete all as specified and directed.

Supply and Fixing LED street light luminaires 90 watt with pressure aluminium -die- cast powder coating housing & frame with heat resistant,high efficiency toughned glass with EPDM gasket for IP66 protection complete assembly with LED, driver& accessories pre-wiredup to terminal block including connection on pole or building including taking down of old/ unserviceble street light fitting complete all as specified and directed.

S&F Solar LED light fitting 24 Watt high efficiency All-in One Solar street light mono Crystal, Lithium Ferro Phosphate battery with in-built BMS technology, MPPT Solar Charger controller and aluminium extruded body with PIR motion sensor automatically control the dimming and brightness of light, battery capacity 30AH, IP65, temp 5700K including taking down OLD UNSV Solar LED light complete all as specified and directed.

S&F (in replacemement) ACB 4 pole of size 630 Amp, suitable as per existing in the existing out door/ indoor LT panels and connetion with using aluminum lugs/ ferruls incl disconnection & connection of cable and making necessary alteration in panel/ door using welding wk and cutting as required for proper fixing & connection complete all as specified and directed.

M&L for hiring Fault locator Megger machine,Locating fault in HT/LT UG cable of any size complete all as specified and directed. Note:- (i) All the instruments, and T&P required for the above job shall be arranged by the contractor at site and cost of the deemed to be included in the above rates. (ii) Contractor should be provide two labours for Joining and dismentling of cable at both the end and excavation above the faulty cable if reqduired.

Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable straight trough heat shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size 25 Sqmm to 50 Sqmm insulated armoured aluminium cable including taking down old/ unserveciable joint kit complete all as specified and directed.

Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable straight trough heat shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size 70 Sqmm to 120 Sqmm insulated armoured aluminium cable including taking down old/ unserveciable joint kit complete all as specified and directed.

Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable straight trough heat shrink type joint complete with jointing material & accessories for 3.5 core XLPE cable of size size 150 Sqmm to 185 Sqmm insulated armoured aluminium cable including taking down old/ unserveciable joint kit complete all as specified and directed.

S&F MCCB 63 Amp, 4 pole, 415 Volt ISI marked conforming to 'B" curve, breaking capacity 16 KA complete including taking down complete all as specified and directed.

S&F MCCB, 4 pole, 415 volts, 400 Amps, breaking capacity 36 KA, with thermal magnetic release adjustable type including taking down old/ unserviceble MCCB complete all as specified and directed.

S&F MCCB, 4 pole, 415 volts, 315 Amps, breaking capacity 36 KA, with thermal magnetic release adjustable type including taking down old/ unserviceble MCCB complete all as specified and directed.

S&F MCCB, 4 pole, 415 volts, 250 Amps, breaking capacity 35 KA/ 36 KA, with thermal magnetic release adjustable type including taking down old/ unserviceble MCCB complete all as specified and directed.

S&F MCCB, 4 pole, 415 volts, 200 Amps, breaking capacity 35 KA/ 36 KA, with thermal magnetic release adjustable type including taking down old/ unserviceble MCCB complete all as specified and directed.

S&F MCCB, 4 pole, 415 volts, 160 Amps, breaking capacity 35 KA/ 36 KA, with thermal magnetic release adjustable type including taking down old/ unserviceble MCCB complete all as specified and directed.

S&F MCCB, 3 pole, 415 volts, 100 Amps, breaking capacity 16 KA, with thermal magnetic release adjustable type including taking down old/ unserviceble MCCB complete all as specified and directed.

M&L for MCCB, 3 pole, 415 volts, 63 Amps, breaking capacity 25KA, with thermal magnetic release adjustable type including taking out existing old/ unserviceble MCCB complete all as specified and directed.

Supply and fixing in repair MCB TPN, 4 pole, 415 volts, 63 Amps, 'B' curve 10 KA complete all as specified and directed.

M&L for earthing with galvanized steel earth plate electrode 600 x 600 x 6.0mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron 32 x 6mm strip as earthing lead protected by GI pipe light grade 40mm bore for protection of GI earth strip and 20mm dia GI pipe medium grade for watering with alternate layers of charcoal/ coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/ screened funnel and making brick masonry finished chamber of internal size 300mm x 300mm x 300mm with concrete base, covered with a cast Iron hinged cover resting over the cast iron frame painted with black bitumastic paint which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/ MCB DB for feeding the electric supply complete including dismantling of old u/s earthing complete all as specified and as shown in electrical plate No.3 of SSR Part-I and testing of earth resistance as required. Note:- 7.5 RM strip wire upto 7.5 RM including unit rate.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 32 x 6mm galvanised iron strip complete all as specified and directed.

M&L for loose filling spreading and leveling hard core 40mm graded corse aggregate complete all as specified and directed.

M&L for surface excavation in soft/ loose soil not exceeding 30cm deep and averaging 15 cm and getting out including leveling the surface complete all as specified and directed.

M&L for Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelledwhite, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20 x 15cm size including taking down old one, complete all as specified and directed.

M&L for Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, including taking down old one for HT, 25 x 20 cm size, complete all as specified and directed.

Printing and fixing of printed paper/ sticker of size 21 x 29.7 cm (A4 Size) in LT Panel as detail provided by office (approx 40 word) in exiting substation board, complete all as specified and directed.

Material and labour in welding of old exiting LT panel of any size, complete all as specified and directed. Note:- Repairs to LT panel boards complete with necessary welding works to door, replacement of unserviceable hings and all drop bolt, complete all as specified and directed.

Material and labour in painting of old rusted LT panel of any size with one coat of synthetic enamel spray paint of approved colour internally and externally complete all as specified and directed.

M&L for treatment of existing high resistance earthing pit by pouring of salt water solution made of 20 ltrs of water and 5 Kg of salt in the trench to be prepared all around the existing earth pit with radious 60 cm from the centre of the earth pit to the centre of the trench with a depth not less than 30 cm below ground level complete all as specified and directed by the Engr-in-charge and levelling/ returning filling of earth surface.

M&L for scrubbing out old paint external surfaces of 2 pole structures consisting of cross arms, GOD assy with pipe, DO fuse assy, clamps etc., of any description and applying one coat of Aluminium paint by mannualy complete all as specified and directed. Note:- This rate inclusive of painting all minor items such as clamps, brackets, nuts, bolts and washers which is not particularly mentioned in the structures & Each job will be measured and paid.

Supply and fixing cable route indicator, made of MS sheet of size 200mm x 150mm x 3mm thick, spot welded with angle iron of size 40 x 40 x 5mm thick, 750mm long embedded in PCC (1:2:4) type B-2 (using 40mm graded crushed stone aggregate) block 30cm x 30cm x 40cm in ground including one coat of synthetic enamel black paint over one coat of red oxide zinc chrome primer and writing with white paint showing size of cable HT /LT complete all as specified and directed.

M & L for Stay Assembly complete with Accessories as show in Electrical Plate No. 1 of MES Schedule Part-I, diameter of Stay Rod 16mm, size of Plate 230 x 230 x 6mm including taking down old stay assembly, complete all as specified and directed. Note:- Earthwork, Cement Concrete, Mild Steel Stay Clamps with Bolts, Nuts, Stay Strand, Loop Insulator etc. will be measured and paid under approprite Items.

M&L for Removal of Vegitation/ undergrowth/ bushes and tree branches in the premises of E/M installations (sub stn) by using mechanical bush cutter and surface excavation, JCB where deemed necessary and cleaning the creepers growing on the fencing of installation and removal of waste vegitation to the nearest dust bin or location as directed of periodicity complete all as specified and directed by Eng-in-Charge. Note:- Any T&P and transportation required for removing of Vegitation from installation deemed to be included in the quoted rate.

S&F in repair LT lighting arrestors for outdoor use, non liner resistor type, horn gap and chocking coil, maximum working pressure 1100 volts complete all as specified and directed.

m/s bansal construction (BID ID -3470262)

AGARWAL BUILDERS (BID ID -3470285)