PROVISION OF RECEPTION AND SECURITY STAFF ROOM ALONGWITH ALLIED INFRA NEAR CROPS HQ AT BB CANTT, SRINAGAR

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in any type of soil, complete all as specified and directed.

Excavating in trenches not exceeding 1.5m wide and exceeding 1.5 m and not exceeding 3.00 in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in any type of soil, complete all as specified and directed.

M & L for Plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and directed.

Form work to sides of concrete foundation, footings, bases of columns, plinth beam etc, vertical or to batter, complete all as specified and directed. .

M & L for reinforced cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in foundation footings, foundation beam,plinth beams and bases of columns basement slabs, and mass concrete., complete all as specified and directed.

Form work to sides and soffits of floor or roof beams, beam, lintels, cantilevers etc, fair finished surface. , complete all as specified and directed

M&L for reinforced cement concrete 1:2:4 type B1 using 20mm graded crushed stone as in roof beams, cantilevers , bressummers, lintels over 1.5 m span, complete all as specified and as directed.

Form work to sides of pillars, posts, struts, piers, columns, fair finished surface, complete all as specified and as directed.

M & L for reinforced cement concrete 1:2:4 type B1 using 20mm graded crushed stone as in columns pillers, piers, posts and struts, complete all as specified and directed

S & F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia but in stirups, complete all as specified and directed

M&L for TMT bars 8 mm dia in stirrups and over, cut to length, bent to shape reqd and binding with and including MS wire not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil, complete all as specified and directed.

Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point, complete all as specified and directed.

M & L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1 : 4, complete as specified and directed.

M & L brick work with sub class 'B' bricks straight or curved to any radius as in half brick thick built in CM 1 : 4, complete all as specified and directed

M& L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Gde Fe 410-W (Gde- E-250) Qty-A, complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S & f Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall and as in eaves bd etc, fixed with self tapping screws, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed..

M&L preparing surface of newly plastered walls and applying two coats of oil bond distemper over 3mm thick wall care putty, complete all as specified and directed..

M & L for broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface., complete all as specified and as directed .

M&L for 75mm thick plain cement concrete 1:3:6 type C-2 Using 40mm graded crushed stone aggregate, as in sub base under floors, complete all as specified and directed.

M&L 25 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in sub base of floors finished even and fair, complete all as specified and as directed.

M & L 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2, complete as specified and directed.

M&L for Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm and n.exc 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface , over and including 15mm thick screed bed or bedding layer in cement mortor 1:6, complete all as specified and directed.

M&L for Vitreous china water closet pan (pedestal pattern), white with seat cover and hinging device ,fixing bolts etc (excluding flushing cistern and including flush pipe), complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350x250x7mm /450x300x7mm thick, best quality as in skirting, dados, walls, vertical surfaces etc., set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 550x400mm including waste chain & plug and porcelean stopper and including brackets, waste pipe etc., complete all as specified directed.

S&F 10 litre capacity PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets, complete as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position ,complete all as specified and directed.

S & F Stop/Angle valve 15mm bore, cast copper alloy screwed down, high kpressure, with crutch jor butter fly handlel, screwed bosth ends for iron pipe or for unions, complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer, complete all as specified and directed.

S&F CP fancy type mixture tap 15 mm bore of standard quality for mixing hot & cold water (WHB) as approved by Engr-in-Charge with centre hole mixer with fittings, complete as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall /floor /laid in trenches etc, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend or tee or radius, complete all as specified and directed.

S&F PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement , complete all as specified and directed

S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall /floor, complete all as specified and as directed.

S&F 75mm bore PVC (SWR) bend or tee or radius, complete all as specified and directed.

S&F Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked), complete all as specified and directed.

S & F tubular towel rail 60cm long, aluminium anodised fixed with and including CP brass screws and wooden/plastic cleats, complete all as specified and directed.

Supply and fixing GI water tubing 15 nmm bore medium grade galvanised with all fittings like socket, union, elbow, bend, etc jointed and fixed to walls, ceilings or laid on floors , complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I , complete all as specified and directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms), complete all as specified and directed.

S & F 15 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of Gde 410-W (Gde-E-250)Qty-A, complete all as specified and directed.

S&F 16mm dia mild steel screw bolt (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal and one square nut, complete all as specified and directed.

S & F aluminium powder coated ventilators made of the following specifications :- (Net external size of ventilator shall be measured. Following items are included in this unit rate.) (a) Aluminium frame powder coated stiles, bottom, top and middle rail of hollow section 50 mm x 25 mm x 1.80 mm thick. (b) Lower portion of ventilator shall be fixed with 3 mm thick pin headed glass fixed with suitable aluminium beading clips and EPDM beading (rubber). (c) Upper portion shall be fixed with aluminium powder coated louver guides fixed with 3 mm thick pinheaded glass with suitable EPDM beading incl suitable handle and clips. (d) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with suitable frame in upper panel. (e) Repair to the jamb, cills and all sides around the window is incl in unit rate. The repair finishes to match the existing surfaces like tiles, plastering etc.

S & F aluminium powder coated sliding window made of the following specifications :- (Net external size of window shall be measured. Following items are included in this unit rate.) (a) Aluminium frame powder coated all around of hollow section 100 mm x 44 mm x 1.60 mm thick. (b) Provn of 03 trade runners of size 92 x 31.75 x 1.10 mm. (c) Provn of glazed sliding shutters (02 Nos) of section 44 mm x 18 mm x 1.25 mm provided with 3.50 mm thick tinted glass with suitable EPDM beading and locking clips arrangement. (d) Provn of 01 No gauzed shutter of Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm with suitable EPDM beading and locking clips arrangement. Section of shutter as per para 9 (c) above. (e) Aluminium powder coated grill of weight not less than 2.60 Kg/Sqm on external side with suitable frame/aluminium runner to be fixed on the window frame. (f) Repair to the jamb, cills and all sides around the window is incl in unit rate. The repair finishes to match the existing surfaces like tiles, plastering etc

S&F aluminium door air tight anodized frame made of size 100x45mm of sheet thickness 1.5mm with one or more rebate including jointing cleats hinges etc for fixing anodized aluminium door shutter fully paneled )two NOs of panel on each shutter) with 5.5 mm thick tinted plain glass shutter rail made of 80x45mm of sheet thickness 1.5mm (top, bottom, middle and side rail). Single/double leaf side hung type including necessary joint cleats, anodized aluminium fitting/aluminium fitting such as aluminium butt hinges 100mm long 3 NOs on each shutter, aluminium anodized tower bolt 200mm long 2 NOs for each door, aluminium anodized handle 150 mm 2 NOs ‘D’ type for each. Shutter & locking 6 lever of make Harrison one on each door, bottom door spring one on each shutter including hydrullic door closer. All door fitting except cleat shall be Ist marked (size of each door shall be as per site requirement), complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm, complete all specified and directed.

S&F 100 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified & directed.

S&F 100 mm aluminum alloy handles, fabricated type, anodised, complete all specified and directed.

S & F Gypsum Board 10mm thick as in Ceiling ,fixed with screw as per manufactures instructions including GI Frame work for gypsum board made out of GI sheet not less than 20 Gauge thickness in ceiling fixed with screws,frame suspended with 4mm dia GI wire as per manufactures instructions, complete all as specified and directed.

M&L Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles exc 0.42 sqm and not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in cement white or coloured to match the existing surface and including 10mm thick screed bed or bedding layer in cement mortar 1:3, complete all as specified and directed.

M&L Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in cement white or coloured to match the existing surface and including 10mm thick bedding layers in cement mortar 1:3, complete all as specified and directed.

S & F powder coated aluminium partition with 5mm thick plain/pin headed glass in all & 12mm thick in both side laminated particle board/5mm thick ACP sheet where reqd with Jindal catlogue aluminium section of size 101.6mm x 44.45mm x 127mm and 101.60mm x 44.45mm x 1.20mm , including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screw etc including making good, complete all as specified and directed.

M&L 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M &L Chequered cement concrete tiles 20cmx20cmx25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments including 10mm thick screed bed or bedding layers in cement mortar 1:3, complete all as specified and directed.

M&L providing cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregate) in copings, kneelers etc., complete all as specified and directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out soft/loose soil, complete all as specified and directed.

M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of Modular Boxes suitable for modular plates of different way/ sizes for housing/ mounting of any type / size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc. for the following, complete all as specified and directed.

One light point / fan point wiring system controlled by one way switch, complete all as specified and directed.

One 3/5 pin type 5 Amp socket outlet point fixed on independent board and controlled by one switch of one way point wiring system complete, complete all as specified and directed.

Description of all as per serial item No 68 here-in-before, but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system, complete all as specified and directed.

Supply and fixing of modular type switch of 5/6 Amps 220 Volts AC, one module, complete all as specified and directed..

Supply and fixing of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular , complete all as specified and directed..

Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module, complete all as specified and directed.

Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all as specified and directed.

Supply and fixing ceiling rose three terminals type made out of polycarbonate , isolated body complete all as specified and directed.

Supply and fix recessed/ceiling concealed mounted down lighter light fitting of round/Square flate shapes decorative type with high efficiency PMMA fiffuser soft glare free light with drivers & LED luminaire of rating capacity in 15 Watt to 18 Watt 220 volt AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete including making in additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete and also providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed.

Supply and fixing LED mirror light fitting with high out put diffuuser 2 feet long of 10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting and making electric connection, complete all as specified and directed.

Supply and fixing of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting , complete all as specified and directed

Supply and fixing of LED street light fitting for buildings of rated capacity 35 Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant with lense embeded including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attechment system of suitable bracket length upto 1.0 mtr long and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed.

Supply and fixing of sheet metal enclosure duly powder coated with single pole and neural enclosure with having a two pin and earth plug & top and mounting chanel alongwith one 01 MCB SP 20 Amp and dully fixed surface on wall or concealed in wall and making all necessary electrical connection including taking down of existing DBs a as required at site, complete all as specified and directed.

Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 8 way type 220 volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical connection, complete all as specified and directed

Supply and fixing of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed.

Supply and fixing of MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection , complete all as specified and directed

Supply and fixing of MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection, complete all as specified and directed

S&F star rated ventilating exhaust fan made out of sturdy engineering plastic body complete with louvers and shutter, 250 mm sweep, 230 Volts AC single phase, 50Hz, 1200 RPM, coper winding including making of suitable type /size of hole on any type of wall and fixing compete with nut, bolt etc and making good distrubed surface of wall/ceiling & finishes to match and providig flate flexible copper wire & making all electrical connection complete all as specified and directed.

S&F star rated electric wall mounted fan 400 mm sweep of single phase 230 volt AC with having pull cord oscillating type single piece AS blade, three speed pull cord control complete with blade and guard framing support & connecting accessories and fixed/grouting on wall/roof with MS fastner, nut & bolt including providig flate flexible copper wire and making all electrical connection, complete all as specified and directed.

Supply, laying and testing of LT cableXLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade of size 10 sqmm 2 core including laid in trenches or fixing on poles or passing through pipes, complete all as specified and directed.

Supply and fixing of GI water tubing 25 nmm bore light grade galvanised with all fittings like socket, union, elbow, bend, etc jointed and laid in trenches, complete all as specified and directed.

M&L of Locally available river sand filling in trenches below and above / around UG cable for cable protection, in duct under and above the cables including punning around cable complete all as specified and directed. Note - Punned thickness shall only be measured and paid.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other, complete all as specified and directed.

Supply and fixing electric geyser storage type steel body with porcelain enamel glass lined inner tank and heating element upto 2 KW suitable for capacity 25 Litre .BEE 5 star rated complete with all accesories such as safety valve, thermostate , NRV,PVC Connection and fixed to wall with MS fastner ,nut bolts and making electric connection, complete all as specified and as directed.

S&F galvanised steel tubing, 40 mm bore, light grade, ISI marked, for protection of under ground cable on pole/wall/under road, complete all as specified and as directed.

Supply , fixing / laying in trenches/on wall/under path / road etc galvanised iron pipe of size 20 mm dia meidum class including all fitting with ISI marked including necessary fittings (Excavation / earthwork for pipe line joints, and shall be measured and paid for separately), complete all as specified and directed.

Supply and fixing brass gate /GM globe valve 20 mm dia bore with iron wheel head comlete in replacement for spigot/socket edns for GI pipe including cutting of pipes and insertion of union ISI marked complete all as specified and directe

M & L for Cutting existing pipe upto 80 mm pipe line and connecting with 20 mm dia pipe including fittings such as Tee, Bends, Reducer, tail pipe, socket, nut, bolt, rubber sheet gasket etc, complete all as specified and directed.

M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete work all as specified and directed .

Alishan Builders (BID ID -3492523)

Concept Engineering & Constructions (BID ID -3498112)

M/S SK ATLANTIC ENTERPRISES (BID ID -3491835)

M/S Vivek Gupta and Co (BID ID -3491861)

M/S AIJAZ ENTERPRISES (BID ID -3492234)

M/S PARVEZ AHMAD LONE (BID ID -3492294)

M/S NORTHERN ELECTRICAL WORKS (BID ID -3492602)

M/S TAJ DIN KHARI (BID ID -3498079)