CWE/D-39/2022-23

Amount

Taking down cement plaster of any description on brick /stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc up to 10m height incl remove all debris in 2 KM from site complete all as specified and directed.

M&L for 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by Engineer-in-charge.

M&L for 10mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specifed as direted by Engr-in-charge.

M & L for applying two coats of oil bond distemper over one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed.

M&L for old decorated surfaces plastered or unplastered surface of wall complete removal of existing treatment brooming down , rubbing , scraping and washing with water etc and applying two coat of oil bond distemper over one coat of wall care putty on wall complete all a spcefied.

M&L for preparation of old decorated plastered surfaces of walls, brooming down,washing with water etc and applying two coat of cement based paint over one coat of putty up to 10 m height complete all as specified and directed.

Demolition of brick work built in cement or cement lime mortar of any description including quoins, arches, pillars etc., all as directed.

M & L for brick work with Cement Mortar 1:6 using sub class 'B' bricks, old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed.

Dismantling of wall and ceiling/cup board board fibre pulp AC boards etc any thickness including cover fillets removing the wiring and refixing the same including fixture as necessary at site including frame work, complete all as specified and directed.

M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32mm of length 1200mm amd secondry itermediate cross-T of size 15x32 of length 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-incharge

M&L Prelaminated particle board,18/19mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination incl teak wood leaping fixed with screws to timber frame work

S&F for 25mm thick Block board grade 2 quality interrior grade commercial type fixed with screws to timber frame work including teak wood leaping and necessary rebating for double shutter where required

S&F continuous (Piano) hinges, mild steel bright finish or electro glavanised (width of flap when open 30mm)

M&L second class hard wood timber scantling plain fillets, square, rectangular or triangular in section clear swan, sectional area exc 13 sqcm & not exc 25 sqcm, secured with nails or brads. Complete all as specified and directed.

Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame), all as specified and directed.

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame), all as specified and directed.

S & F Pressed steel frames box type made of 1.25 mm thick MS Sheet double rebates of size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc, incl PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

S&F 35 mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass, gauze etc (without sash bars), ;ldevided into square with plain, chamferred or rounded sash bar and fitted with cut and mitred beads for securing glass, size of members of shutters as per specified in SSS Part - I section 8 clause 8.24 (a), supplied and fittedn to chowkhats..

M & L for 35 mm thick factory made 2nd class hardwood plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated, complete all as specified and directed.

M&L aluminium alloy powder coated windows including aluminium coated frames silding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazing clips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted frosted glass of superior quality and stainless steel jali including all standard fittings complete all as specified and directed

M&L aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section 85 mm x44.45 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm as directed and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required including alu hinges 150 mm, alu handle 150 mm ,tower bolt 150 mm ,floor spring heavy duty "SAMRAT" ,looking arrangement "GODREJ" rubber gasket and door stopper complete all as specified and directed.

S&F aluminium ventilator partly glazed/ gauzed including including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. provision for fixing the exhaust fan complete all as specified and as directed

M & L for aluminium alloy Powder coated window grill standard 10mm section and opening of size window grill as per approved sample and as per IS specifications complete all as specified and as directed.

S&F for fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame and fixing with ancher bolts all as specified and as directed.

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete all as spefcified and directed.

S&F MS butt hinges medium weight 100 mm size fixed with MS screws.

S&F aluminium anodised barrel tower bolt extruded section 75 mm long and fixed with MS screws.

S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws.

S&F 75 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws.

S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws.

S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut.

S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar all as directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary, complete all as specified

S&F for stainless steel plate rack of size 90x80x25 cm depth size made out of 0.80mm thick sheet complerte all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel sink with drainage board made out of 1 mm thick sheet for kitchen with plug, washers, waste pipe, waste cuppling incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complerte all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm, complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm complete all as speficie and directed.

Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed

Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed

Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for conceled water tubing etc cutting exceeding 10cm girth but not exc. 20 cm all as directed.

Supply and fix in repair vitreous china wash hand basin (with stands) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste cupling complete all as specified

Supply and fixin repairs vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘standard Grade P’ or ‘S’ trap front or back inlet (excluding flushing cistern and flush pipe ) complete all as specified and directed by Engr-in-Charge,

S&F in repair vitreous china wash down water closet pan (padestal pattern) white incl 'P' or 'S' 100 mm trap and making good the disturbed surface to match with the existing complete all as specified and all as directed.

S&F of plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device, complete all as specified

Supply only PVC low level white flushing cistern valveless syphonic action type 10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified, all as specified.

S & F in repairs 15 mm dia 600mm long PVC connections with brass check nut complete.

S & F in repairs Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all as specified and directed by Engineer-in-Charge.

S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed by Engineer-in-Charge.

S&F in repairs Health faucet, CP brass with 1.50m long flexible pipe complerte all as specified and directed by Engineer-in-Charge.

S&F CP jet spray for EWC with flexible pipe and angle cock/stop cock complete all as specified.

S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule , complete all as specified

S&F in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F for 15 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F for 20 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

S & F in repairs Chromium plated brass overhead shower with arm complete all as specified and directed.

S & F in repair concealed brass chromium plated stop valve fancy type suitable for 15mm bore of pipe with long shank and cup complete all as specified.

S&F in repairs chromium plated brass central hole WHB mixer 15 mm bore chromium plated, fancy type including joints to hot and cold complete all as specified.

S&F in repairs brass chromium plated mode 3 in 1 wall mixture model Quarter half turn (SOLO)of make Jaquar as all specifed and as directed. Code SOL-6281 or equivalent as per approved make length.

Demolition of stone slab and tiles of any description or thickness in floor apron etc incl remove all tiles and other debris in 2 KM form site complete all as specified and directed.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchnthe shade of tile incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and as directed.

S&F Non - skid Ceramic colour tiles 600 x600 x 7 to 8 mm thick in floors etc and 15mm thick screed bed 1:6 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile all as specified.

S&F Non - skid Ceramic colour tiles 600 x150 x 7 to 8 mm thick in vertical surfaces etc and 10mm thick screed bed 1:4 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles all as specified.

M&L for glazed ceremic colour tiles (600x300x7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match the shade with tiles including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

M&L for 18-20 mm Granite (any type) work (table rubbed and polished) in steps,jambs,pillars window-cill,cooking platforms and incl 15mm thick screed bed using marble dust with admixture in CM (1:4) with pointing and white cement (1:2) of pigment to match with shade of granite all as spd.

Dismantling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt all as specified.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering all as specified.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L for RCC Type B0 1:2:4 (12.5mm graded aggregate) use as in Beams, cantilevers, bressumm ers, lintels over 1.5m span complete all as specified

Demolition of concrete and pavings n.exc 15 cm thickness (below or above ground level), complete all as specified.

M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified.

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M & L for 40 mm thick cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor & surfaces finished even and smooth using extra cement, complete all as specified.

M&L for machine pressed precast concrete interlocking paver block 80mm thick M-40 grade any shape and size with grey cement and pigment, complete all as specified.

S&F Chequered cement concrete tiles with grey cement and pigment 30cm X30cm X22mm thick set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for sand filling under floor or in foundations including watering and consolidation

M&L for rotational moulded HDPE water storage tanks white colour 500 lts capacity, triplr layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description.

Material and labour for rotational moulded HDPEwater storage tanks white colour 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description.

S&F 15 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed

S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed

Demolition and breaking up rain water pipes (CI,AC,PVC etc) 75 /110mm dia set in any cement mortor of any diameter incl bends.

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete.

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore complete.

S & F 100 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed

S & F 75 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed

S&F for PVC (SWR) bends & tee any radius, 110 mm bore complete.

S&F for PVC (SWR) bends & tee any radius, 75 mm bore complete.

S&F for 100 mm bore cast iron bends with door plate & tee complete all as specified and as directed.

S&F for 75 mm bore cast iron bends with door plate & tee complete all as specified and as directed.

S&F for 75 mm bore cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S & F for Stainless Steel Rod 25mm dia including SS side caps, brackets, and rings @ 120mm c/c/ complete all as approved by Engineer-in-Charge

S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws.

S & F for PVC waste coupling 32mm dia PTMT(half or full threaded) suitable for WHB/Sink (min wt 450 gms), completed all as specified & directed

Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc.

Dismantling unframed timber scantlings 40sq cm and over in section in any position all as specified and directed

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade st-240 complete all as specified.

S & F steel work in Mild steel in flat, round or square bars, in available lengths including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 Fe 410-W(Gde-E 250) qua lity-A complete all as specified.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

M&L Providing cement concrete in coping type B-1 ,1:2:4 using 12.5mm graded stone aggregate complete all as specified including necessary form work and finishing the exposed surface even and smoth with using extra cement complete all as specified.

M & L for form work to soffits of suspended slabs such as roof slab, Chajja,beam platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.

S&F TMT steel bars of 10 mm dia and over,cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to. complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in Cm 1:4 all as specified and directed.

All as per above item no 109 but except brick.

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified.

Removal of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 150/200mm set in cement mortar of any dia complete including removal of debris from site and deposited in low lying area.

M&L for 150mm bore DWCPE drain pipes laid in trenches and jointed in CM 1:1 with spun yarn complete all as specified and directed.

M&L for 200mm bore DWCPE drain pipes laid in trenches and jointed in CM 1:1 with spun yarn complete all as specified and directed.

M&L PCC 1 : 2 : 4, type D2, using 40mm graded stone aggregates, as in foundation of manholes etc complete all as specified.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finsihed even and smoth without using extra cement complete all as specified.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section) in cement concrete 1 : 2 : 4 type B1 using 20mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified.

M&L SFRC Factory made Precast cement concrete manhole cover' area of each cover Ex .20sqm but not exceeding 0.75 sqm 100 mm thichK TypeB1 1:2:4 concreting including grove and hook arrangement for lifting and placing in position and side covered by MS Sheet complete all as specied and directed by E-IN-Charge

M&L SFRC Factory made Precast cement conc rete manhole cover' area of each cover not exceeding 0.20 sqm 50 mm thick TypeB1 1:2:4 concreting including grove and hook arrangement for lifting and placing in position and side covered by MS Sheet complete all as specied .

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in foundation filling and mass concrete complete all as specified.

S&F framed brackets of angles of tees with web and flanges cut to shape , drilled and countersunk for screw including bending and welding angles as necessary, guesst plates, riveting , etc n exc 10kg each brackets , conforming to Fe 290 Gde-E 165 (Bracket over 10 kg each to be measured under structural steel).

Taking down carefully aluminium point wiring from wooden battan (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc).

Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site complete all as specified and directed.

Taking down old submain wiring of any size and make from the site complete all as specified and directed.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including nonmetalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.2 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :

(a) One light/fan/bell point controlled by one by one way switch ( switch to be measured and paid separtely)

(b) One 3 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately.

(c) -ditto- as above item No 5 (c) but Same board.

One power point with insulated stranded copper conductor cable 2.5 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLS 1100 Volts unsheathed copper conductor 1.5 Sqmm in and including new PVC conduit medium grade not less than 25 mm dia, stranded conductor as earth wire connected to dolly complete.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4 Sqmm size stranded conductor as earthwire..Note-Two runs of 4 sqmm cable and one run of 4 sqmm cable and one run of PVC condit shall be measured as one RM.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 6 Sqmm size stranded conductor as earthwire.Note-Two runs of 6 sqmm cable and one run of 6 sqmm cable and one run of PVC condit shall be measured as one RM.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including PVC conduit for submain wiring and connection complete including rigid PVC conduit FRLS grade,unsheathed copper conuctor cable of 10 Sqmm size stranded conductor as earthwire. Note :- Three runs of 10 Sqmm cable and one run of PVC conduit shall be measured as one RM.

S&F switch modular type 5 Amp SP one way ISI marked complete all as specified.

S&F switch modular type 15 Amp SP one way ISI marked complete all as specified.

S&F socket modular type5 pin 5 Amp flush type ISI marked complete all as specified.

S&F socket outlet modular type 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified.

S&F ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified.

S & F electronic fan regulator 5 step,360 degree rotation 120W-2 module, ISI marked, complete all as specified and directed by engr-in charge.

M&L for earthing of machinery/equipment/panel/installed at power house/subatation, complete with galvanised steel earth palte electrode 600 x 600 cm x 6.3 mm thick buried directly in ground (Earth pit not less than 2.5 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to galvanised iron strip 25 x 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth protected by 40 mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electrical plate No.3 of SSR Part-I )2009) and testing on completion all as specified and directed.

Supply & fix of factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 160 to 250 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar, cement spill protractor, door earthing, mechanical Impact Strength IK 08, neutral link earth link complete.

S&F MCB SPN 40 to 63 Amp "C " curve, 10 kA.

S&F MCB SP 6 to 32 Amp "C" curve ,10 kA.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 105 Lumens/watt and including connecting up with PVC sheathed 0.75 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures..

Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 9-10 watts and not less than 900 lm system lumen output with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures..

M&L of Decorative wall mounting CITY-1 Decorative wall light fixture made up of Polycarbonate, Including 14 W retrofit LED BULB (B-22 base). NOTE-1: Price of LED bulb included with city -1 fitting.

Supply and fix 10/12 watts PVC body bulkhead fitting with non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is >100lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 0.75 Sqmm copper conductor flexible wire fixed complete all as specified and directed.

S & F of surface ceiling mounted, round LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 80 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete.

S & F pressure die cast aluminium housing LED street light luminaires with IP66 deg. of protection suitable for 60 watt LED fitting duly fixed on 40 mm dia GI mast including 50X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : The Contractor quoated the rates incl all accessories like suitable GI pipe mast, 50x6 mm thick MS flat, fashner, nut & bolts, suitable length of flexiable wire.

Provn of exhaust fans metal body AC single phase 230/240 V of size 300 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, metal body with louvre with louvre for fixing of exhaust fan complete all as directed by Engr-in-Charge.

Provn of exhaust fans metal body AC single phase 230/240 V of size 450mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, metal body with louvre with louvre for fixing of exhaust fan complete all as directed by Engr-in-Charge.

Provn of fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge.

S&F wall mounted fan 400 mm sweep, aerodynamic designed, air delivery ≥ 70 CMM, thermal over load protected motor, 3 blade white colour, 230 volts, 50 Hz, 1420 RPM with 90 degree oscillation and having speed & oscillation control by two pull cords system complete all as specified

M&L for breaking the old existing wall and making provn of a round hole for fixing of 300/450 mm sweep exhaust fan including making good to the disturbed wall/ portion and matching with existing colour.all as specified and directed.

Taking down carefully the existing ceiling fan of 1200/1400mm from its position after disconnecting electric connection and making good surface deposits to MES store and refxining the same after rewinding and all at same position all as specified and directed.

M&L for opening up the winding of ceiling fan 1200 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete. Teating of the ceiling fan after refixing in position to the entire satisfaction of Engr-in-Charge.

S&F of sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.

S&F of MCCB 160 A, 4 pole 36 ka MCCB, completely connected with copper thimble and with all accessories complete all as specified and directed.

S&F of MCCB 200 A, 4 pole 36 ka MCCB, completely connected with copper thimble and with all accessories complete all as specified and directed.

S&F in replacement MCCB 250 A, 4 pole 36 ka MCCB, completely connected with copper thimble and with all accessories complete all as specified and directed.

Provn of water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank should be glass line coated complete all as specified of capacity 25 ltr having heating element 1.5 KW and not less than 5 star rating.

Supply and lay cable in replacement XLPE insulated screened PVC bedded, galvanized steel strip and wire armoured , electric power cables (heany duty) 1100 volts grade with stranded alumimium conductor of size 25 Sqmm 3.5 core.

M/S ANIL KUMAR

a.k constructions

M/S Yamin

M/s Verma and Co

GIAN ENGINEERS

SHREE RAM BUILD TECH

MINHAS CONSTRUCTIONS