BLACK TOPPING TO VRN NAGAR AT ELAVANGARKUDI PANCHAYAT

Amount

1..BLACK TOPPING TO VRN NAGAR AT AT ELAVANGARKUDI PANCHAYAT

Picking 5 cm to 10 cm old metalled surface and sectioning - 1 sq.m

Construction of Granular sub base by providing well graded material 25mm to 4.75mm IRC HBG metal @65%,4.75 to 2.36 mm IRC HBG metal @20%&2.36mm below IRC HBG metal @15% & the materials passing 425 microns silevis shall have liquid limit and plastic OMC and directd engineer mix - in - place method

Providing and laying Water Bound Macadam Grading - II(75mm to22.4.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively) and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I(Mix -in - place method) Rate for 10sqm bottom layer

Providing and laying Water Bound Macadam Grading - III(63mm to11.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively) and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I(Mix -in - place method) Rate for 10sqm

Applying TACK COAT over WBM surface at 4Kg / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. Comp.

Providing and layiing pre-mix carpet 20mm thickness using 0.18cum of 13.2 IRC machine crushed metal 0.09cum of 11.2mm IRC machine crushed metal with 14.60Kg of Bitumen for pre-mixing 10 sqm of pre-mix carpet and laying separately Seal coat type "A" using .09 cum of 6.70mm IRC HBG chips with 9.80 Kg of Bitumen for 10sqm including cost and conveyance of materials to the departmental metric gauge for pre-measurement heating the bitumen boiler heating the aggregate and mixing them with bitumen in mini hot mix plant for pre-mix carpet and rolling by 80-100 KN power roller including labour charges for spreading hire and fuel charges for mini hot mix plant, bitumen boiler, all other tools and plants employed etc., complete

Providing gravel soling to both sides of the road including cost of gravel , conveyance charges , stacking charges, spreading & compacting charges etc complete SIDE BERMS etc

Provision For Name Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Elamvazhuthi Rengarajan (BID ID -1226127)