REPAIR/ MAINT OF EXTERNAL WATER SUPPLY NETWORK, FIRE FIGHTING LINE, INSULATION OF PIPES, TANK CLEANING, VALVES AND MISC WORK OF WATER SUPPLY AT JUTOGH, SANJAULI, KUFRI AND KELVIN GROVE UNDER GE JUTOGH

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in deep for laying pipe and getting out in Hard /dense soil complete all as specified and directed.

Returning refiling including spreading leveling watering and well raming in layers not exceeding 25 cm in soft soil complete all as specified and directed.

Removal of excavated soil to a distance 50 mtr and deposting where directed at a level not exceeding 1.5 m above the starting point in soil complete all as specified and directed.

Taking up or down existing old U/s steel tubing any type of following sizes:-

20 mm dia

25 mm dia.

40 mm dia.

50 mm dia.

80 mm dia.

100 mm dia.

Supply, laying & fixing GI tubing medium grade with all necessary fittings such as bends,elbows,tees, flange,shorts pieces,disminishing pieces,caps & plugs incl cutting welding etc laid in trenches/on floor all as directed for Note : Earth work will be measured and paid separately .

20 mm dia

25 mm dia.

40 mm dia.

50 mm dia.

80 mm dia.

100 mm dia.

M&L for providing Elastomeric Nitriel Rubber insulation tube having rubber thickness 19 mm on existing 15mm bore water pipe line, laid on above ground etc incl binding wire with 0.9 mm dia on pipe insulation complete with dismanteling & taking down old unserviceable nitriel rubber all as specified and as directed. Make: A Felx/Supreme/MAG hard insulators or equivalent, ISI approved.

All as per serial item No. above 6.00 here-in-before but of size 20 mm bore.

All as per serial item No. above 6.00 here-in-before but of size 25 mm bore.

All as per serial item No. above 6.00 here-in-before but of size 40 mm bore.

All as per serial item No. above 6.00 here-in-before but of size 50 mm bore.

Collect Sample of water from bore well for testing of " Chemical & Bacteriological tests " from approved laboratory and submitting to Engr- in -Charge complete as specified and directed.

Supply only Alum farric of super quality complete all as speifed and directed .

S&F DOL starter suitable for 5 HP, 3 phase, 415 Volts booster pump with all connection complete all as specified and directed.

Supply only bleaching powder of super quality or any approved make complete all as speifed and directed.

Supply only Calcium Hypo Chlorite (CHLORINE 65% to 70%) calcium based granular disinfectant for water treatment complete all as speifed and directed. Make: AQUAFIT or Altoch GP and any other make approved by E-in-Cs branch.

S&F in repairs Gun Metal fire Hydrant landing valves brass,single outlet , confirming to IS- 5290, of size 75/80 mm with 63 mm size one no buster pump, MODEL No LTB -2 , Flow Rate 900 LPM , discharged 7KgF/ cm2 complete all as specified and directed.

Taking down of existing unserviceable sluice valves both ends flanged including unscrewing of nut & bolts for replacement of the following sizes all as directed

50mm dia

80mm dia

100mm dia

150mm dia

Supply, Fix,Connectng, and testing sluice valves heavy duty class PN 1.6 both end flanged with Stainless Steel spindle with hand wheel and check nut conforming to ISI mark , IS-14846 including provision of jointing material such as insertion rubber gasket sheet 3mm thick, nut & bolts with washer all as required of following sizes

50mm dia

80mm dia

100mm dia

150mm dia

Taking down of existing unserviceable gate / globe valves fitted with iron pipes for replacement of the following sizes:-

15 mm dia

20mm dia

25mm dia

40mm dia

50mm dia

80mm dia

M&L for Gun metal gate valves heavy duty with iron wheel head screwed both ends for iron pip and fixed of the following sizes

15 mm dia

20mm dia

25mm dia

40mm dia

50mm dia

80mm dia

M & L for arresting of water from existing pipe line in position from CI/GI pipe of size 80 mm to 100 mm bore with and including excavation cutting welding as per site requirement, jointing material such as flange joint/Gasket joint/CI or GI fitting ,nut& bolts ,washers and refilling etc complete all as specified and directed .

M & L for arresting of water from existing pipe line in position from CI/GI pipe of size 15 mm to 50 mm bore with and including excavation ,cutting welding as per site requirement, jointing material such as flange joint/Gasket joint/CI or GI fitting ,nut& bolts ,washers and refilling etc complete all as specified and directed.

M & L for servicing of AC induction motor with cetrifugal pump set and re-install same after painting the pump including connection at inlet & outlet inside the pume house complete, overhauling / Repair of complete centrifugal multi stage pumpset of 100/ 75 HP capacity Including disconnection of electric & water connections and transportation to workshop if required as per site condition with replacement of spare parts complete all as specified and directed. Note :- Spare Parts will be measured and paid separately as supply only in relevent items.

Supply only Bearing Size 308 / 307 suitable for high speed pump set as per sample.

Supply only Bearing cover

Supply only Cooling fan for motor as per sample

Supply only Coupling set for motor & pump complete as per sample

Supply only Gland packing of size 8x8mm. Make:Teflon/Charminar

Supply only Grease white. Make:Castrol/Goldliner

Supply only Nut and bolt any sizes as per sample

Supply only Gland packing of size 10x10mm. Make:Teflon/Charminar

Cleaning of valve pit chamber with complete painting of any size by taking out mud & muddy water and depositing the same at a distance n. exc 20 mtr away from pit including swipping free from & all type of dirt including rectification the leakage of valve of any size by using of appropriate size and required packing materials for purpose complete all as specified and directed.

M & L for servicing of AC induction motor with cetrifugal pump set and re-install same after painting the pump including connection at inlet & outlet inside the pume house complete, overhauling / Repair of complete centrifugal multi stage pumpset of 25/15 HP capacity Including disconnection of electric & water connections and transportation to workshop if required as per site condition with replacement of spare parts complete all as specified and directed. Note :- Spare Parts will be measured and paid separately as supply only in relevent items.

Supply only Bearing Size suitable for as per sample

Supply only Bearing cover

Supply only Gland packing of size 8x8mm. Make:-Teflon/Charminar

Supply only Grease white .Make:-Castrol/Goldliner

Supply only Nut and bolt any sizes as per sample

Supply onlyCoupling for motor & pump set complete as per sample

Taking out the submerssible pump set 5 HP complete with column pipes of size 40mm dia pipe from bore well at Gate No-2 Jutogh Cantt for repair & servicing of pump set complete and lowering down the pump set alongwith column pipes after necessary repairs complete all as specified and directed. Note: Necessary T&P required to complete the Job shall be provided by the contractor and cost shall be deemed to include the rate quoted.

S&F galvanised concertina coil ( for protection from monkeys and other animals), laid on ground around the reservoir/water tank complete all as specified and directed. Note:- Make, Size and dia of concertina coil shall be as approved by GE/EIC.

S&F in repairs fire safety hose pipe with brass gun metal male and female ends, connected with one nozzle, with safety box, every box having two hose pipes (one set) minimum 30m long each pipe, complete all as specified and directed.

Supply and Fixing in replacement MCCB TP 250 Amps , 415 Volts, 36 KA ,3 POLE, Ics=100% Icu , overload adjustable short circuit adjustable type incl complete connection complete all as specified and directed.

S & F in replacement of Single Core Copper cable conductor of 25 sqmm multistrandede PVC Insulated complete all as specified and directed.

S & F in replacement of PVC flexible pipe of size 32/40 mm dia complete all as specified and directed.

M & L for taking out the settled sedimental materials from reservoir, silt ,other foreign material from tank complete and depositing and thrown where directed at a distance not exceeding 50 meter, including repairing leakage chemical treatement, where leakage portion and de-watering cleaning with iron brushes with bleaching powder, scraching, internal and external white washing with two coats of lime wash using duly mixed 0.5% copper sulphate complete (internally & externally as applicable ) and painting the complete railing and MS pipe connected to reservoir with one coat of black bituminous paint after preparation of complete surface of the RCC open static tank of capacity 10,00,000 gallons located at a near MH Shimla above site complete all as specified and directed.

All as per serial item No. 29.00 above but capacity of tank 5,00,000 gallons located at a near MES JCO's mess pocket 'D' area complete all as specified and directed

All as per serial item No. 29.00 above but capacity of tank 2,50,000 gallons located at a near Robert Height ASCON NODE down side complete all as specified and directed.

All as per serial item No.29 here-in-before but capacity of tank 1,00,000 Fire Tank gallons complete all as specified and as directed.

All as per serial item No. 29 here-in-before but capacity of RCC Semi UG sump 1,20,000 gallons at anear Yadgar gate pump house complete all as specified and as directed.

All as per serial item No. 29 here-in-before but capacity of RCC Semi UG sump 1,00,000 gallons at a near MH Shimla above pump house complete all as specified and as directed.

All as per serial item No. 29.00 above but capacity of RCC tank 30,000 gallons at a Jutogh main pump house complete all as specified and as directed.

All as per serial item No. 29.00 above but capacity of RCC tank 20,000 gallons at a near MH shimla and Sanjauli cantt complete all as specified and as directed.

All as per serial item No. 29.00 above but capacity of RCC tank 10,000 gallons complete all as specified and as directed.

All as per serial item No. 29.00 above but capacity of RCC tank 8,000 gallons located at a Kelvin Grove complete all as specified and as directed.

M&L for taking out the complete settled materials from steel water tank of capacity 30,000 gallons near Mata Mandir and cleaning all the surfaces externally with iron brushes welding where broken body with steel plate/channel and painting the complete tank and inlet, out let connection with two coats of synthetic enamel paint after preparation of the surface made suitable for drinking water complete all as specified and directed.

All as per serial item No. 38.00 above but tank of capacity 20,000 gallons located at 304(I) Supply depot complete all as specified and as directed.

M&L for preparation of existing surface of walls by brooming and applying two coats of colour wash at main pump house and yadgar pump house complete all as specified and directed.

M & L for shifting of existing 25HP MOTOR & PUMP from yadagar pump Jutogh house and to be fitted at CHLORINE tank near MH Jutogh with connectincg main stream line with complete fitting accessories including tee, bend ,pipe,elbow,welding etc complete all as directed. NOTE : Necessary T & P required for the complete Job shall be deemed to be included in quoted rate.

Supplying, fabricating, installing, testing and commissioning of indoor type LT feeder pillar box of suitable size for pump No.1 factory fabricated cubical panel mounted on angle iron frame of size 50x50x6 mm double door dust and vermin proof made out of 2.00 mm thick CRCA sheet mounting on suitable foundation above 60cm from GL with necessary PCC etc with front and back opening and locking arrangement finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer incl necessary connection with copper bus bar of size strip 40mm x 10mm for three phases and one neutral, duly covered with PVC colour coded sleeves, mounted on porcelain insulators, 4 wire, 415 Volts, 50 Hz, AC supply incl suitable size of copper cable for control wiring, necessary cable glands, lugs etc, dismanteling & taking down old unserviceable panel and providing the following accessories:

MCCB 4 pole, 250 Amps 36 KA Adjustable type with extended handle - 01 No(incommer)

LED indication lamp set of three- 01 No

Star delta Starter fully automatic with Single Phase Preventor, under/over voltage protection Suitable for 100 HP Induction motor 415V 3-Ph AC and control wire with copper cable complete - 01 No

MCB SPN, 32 Amps 10 KA type - 02 Nos

Supplying, fabricating, installing, testing and commissioning of indoor type LT feeder pillar box of suitable size for pump No. 3, factory fabricated cubical panel mounted on angle iron frame of size 50x50x6 mm double door dust and vermin proof made out of 2.00 mm thick CRCA sheet mounting on suitable foundation above 60cm from GL with necessary PCC etc with front and back opening and locking arrangement finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer incl necessary connection with copper bus bar of size strip 40mm x 10mm for three phases and one neutral, duly covered with PVC colour coded sleeves, mounted on porcelain insulators, 4 wire, 415 Volts, 50 Hz, AC supply incl suitable size of copper cable for control wiring, necessary cable glands, lugs etc, dismanteling & taking down old unserviceable panel and providing the following accessories:

MCCB 4 pole, 250 Amps 36 KA Adjustable type with extended handle - 01 No(incommer)

LED indication lamp set of three- 01 No

Star delta Starter fully automatic with Single Phase Preventor, under/over voltage protection Suitable for 100 HP Induction motor 415V 3-Ph AC and control wire with copper cable complete - 01 No

MCB SPN, 32 Amps 10 KA type - 01 No

S&F in replacement CT 230 volt ratio 200/5 Amp, class 1.0 with complete connection in existing panel all as specified & directed.

M & L for servicing of APFC panel with checking of control wiring and replacement of defective control wiring etc complete all as specified and directed. Note :- Spare Parts will be measured and paid separately under relevent items as supply only.

Supply only 3 kVAR standard duty power capacitor 440v,50Hz complete as per IS : 13340 ,IEC 60831 -1 & 2

Supply only 5 kVAR standard duty power capacitor 440v,50Hz complete as per IS : 13340 ,IEC 60831 -1 & 2

Supply only 7.5 kVAR standard duty power capacitor 440v,50Hz complete as per IS : 13340 ,IEC 60831 -1 & 2

Supply only Push button for ON/OFF complete all as specified and directed.

S & F in repair Digital Ammeter 0-500 Amp suitable for three phase to fix in existing LT panel complete all as specified and directed.

S & F in repair Digital Volt Meter 0-500 Volts suitable for three phase to fix in existing LT panel complete all as specified and directed.

S & F in repair LED indicator lamp of different colours (red, green ,yellow ,white etc) suitable to fix in existing LT panel complete all as specified and directed.

S&F in replacement of on load changeover switches 4 pole 400 Amps , 415 volts with extended rotary handle fixed in sheet metal enclosure allows changeover from main supply to generator supply & vice versa complete all as specified and directed.

Supply & fixing or laying in replacement HDPE (DWC) tubing 100 mm dia of pressure rating 6Kgf/Cm2 fixing on poles, walls under floors, laying on surface etc as reqd at site and complete all as specified and directed. Note: All items and accessories , bend, joints, nut bolts, clamps etc are incl in quoted rates.

Supply, Laying and passing through pipe XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with standerd aluminium conductor incl taking down of old cable of following size all as specified & directed. Note: Pipe will be measured and paid separately.

300 sqmm 3.5 core

120 sqmm 3.5 core

M & L earthing complete for electrical equipments with galvanised steel earth plage electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to depth not less than 2.24 mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to earth lead of GI strip size 32 x 6 mm by means of nuts, bolts, check nuts & washers made of galvanised iron or steel and connected to main switch board or main control board as directed charcoal or coke and salt in alternate layers, necessary excavation and earth work in hard/ dense soil coplete all other accessories as shown on electrical plate No 3 of MES SSR Part I including 50 mm bore light grade GI pipe 1.8 mtr length with top end covered with plug or cap for watering and 30 x 30 x 30 cm size PCC 1 : 3 : 6 block around watering pipe parallel to the existing earth, excluding 20 mm dia watering pipe, PCC, Watering pit, Funnel, Pit cover complete all as specified and directed

Supplying, fabricating, installing, testing and commissioning of outdoor type LT feeder pillar box of size 60cmx60cmx50cm factory fabricated, cubical panel, suitable for fixing one MCCB mounted on angle iron frame of size 50x6 mm, made out of 3.15 mm thick sheet mounting on suitable foundation above 60cm from GL, 150 mm thick PCC (1:3:6) type C 2 , with front opening and locking arrangement, finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer incl arrangement of fixing MCCB and 2 Nos opening for 300 Sqmm 3.5 core cable as in and out with LED indicators 03 Nos. and necessary cable glands, lugs etc, dismanteling & taking down old unserviceable panel. Note: MCCB of 400 Amps will be measured and paid separately under relevant items complete all as specified and directed.

S&F in LT feeder pillar box in above item Electronic - Micro-processor based MCCB 400 Amps, 36 KA 4 pole 415 Volts AC, Ics=100% Icu as per IEC 60947-II , adjustable overload setting Ir=0.4-1.0xIn , Tr 3-30 Sec, adjustable short circuit setting Isd=1.5-10xIr, Ground fault setting Ig=0.2-1xIn with double break contacts with spreader and phase barrier complete all as specified and directed.

M&L for Cutting the existing bituminuos road/ pavement/ hardstanding for passing of pipe to any depth with 300mm width and making good road surface by filling earth, hard core (40mm stone well raming and PCC 1:3:6 , 100mm thick complete all as specified and directed.

M& L for preparation of steel surface of any description over 10 cm width or girth and painting of two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Taking down wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S & F 3.2 mm thick plain, mild steel black sheet covering to door shutters, chowkats (frames) chullah hoods water tanks water troughs, ducts urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

M &L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for PCC 1:2:4, Type B-2, 40 mm graded crushed stone aggregate as in foundation , filling and mass concrete in walls or retaining walls, any thickness, size or shape including buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L for PCC 1:4:8, type D-2, 40mm graded crushed stone aggregate cement concrete in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, 20 mm graded crushed stone aggregate cement concrete as in foundations of post holes, complete all as specified and directed.

S & F Mild steel Rolled sections ( 410 Fe W) as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates complete incl cutting welding etc complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S & F pre -painted galvanised alumunium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for shifting of existing DG set 100 KVA cap along with AMF Panel incl disconnecting of electrical connection, lifting/ transporting the DG set complete from Main Pump House Jutogh to Yadgar Pump House near gate No 1 approx distance 4 KM incl making necesary electrical connections of cables with lugs and making suitable foundation/ platform of size 2.5 x 1.0 mtr for DG set with PCC 1:3:6, type C-1, of 300mm thick (200 mm above ground level and 100mm below ground level) incl necessary earth work etc complete all as specified and directed. NOTE : Necessary T & P required like Crane/ Hoist for shifting of DG set incl making PCC platform of suitable size for DG set with electrical connections etc deemed to be included in quoted rate for this item.

KATWAL TECHNOCRATS

M/S JAI MAA JAGDHAMBA CONSTRUCTION

triveni enterprises

Babu Ram Sud and Sons