Making proper arrangements consisting of Stand with power control equipments to feed power to the 440 V Star Delta Starter Panel of the Crusher at the Coal Stock w.r.t. Karo OCP, under BnK Area

Amount

Erection of Metalic Pole of above 8 meter and upto 10 meter in cement concrete 1:3:6 (1 cement:3coarse sand:6graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required. (1 span x 50 m x 4 wire) = 200 m x 0.394 kg/m = 78.8 kg.

Supplying and erection of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required.

Supplying & erection of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required.

Supplying and erection of 100 mm X 110 mm shackle insulator complete with G. I. Bolt, nuts and straps etc. as reqd.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Providing and fixing following capacity TP&N disconnector fuseswitch unit inside the existing panel boardwith ISI marked HRCfusesincluding drilling holes in cubicle panel, making connections, etc. as required. (400 A, TP&N)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders inexisting cubicle panel board including drillingholes in cubicle panel, making connections, etc.as required. (400 A, 35 kA, TPMCCB)

Earth work in surface excavation not exceeding 30 cm in depth but exceeding1.5 min width as well as10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto1.5 m,as directed by Engineer-in-Charge:

Surface dressing of the ground including removing vegetation and in equalities not exceeding15 cm deep and disposal of rubbish, lead upto 50 m and lift up to 1.5 m.

Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and for all lift

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 cement : 3 coarse sand (zone III) derived from natural sources : 6 graded stone aggregate 40mm nominal size)

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275gm/m²

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Total impact of GST for the purpose of CTC

M/s Saloni Sales (BID ID -1132646)

M/s Jitendra Enterprises (BID ID -1132649)