ADDN/ ALTN TO BLDG NO O-4 INSIDE FORT WILLIAM, PROVN OF LADY OFFICERS TOILET AND CONNECTED AMENITIES AT KITCHENER HOUSE AND PROVN OF PARTITION AND IRON RACK IN BLDG NO P-146 OF 21 NSR UNDER GE (FW) KOLKATA

Amount

SCHEDULE 'A' PART-I (B/R WORKS) Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as directed .

M&L 40 mm thick P.C.C 1:2:4 type B1 using 20mm graded aggregate as in Sub-floor, sub base etc , finishing the surfaces of concrete ( without using extra cement) even and rough to receive the topping layer complete all as directed.

Material & labour for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels over 1.5 m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water throughs and the like etc including weathering, slightly rounded or chamfered angles throating etc complete all as specified and directed.

M & L for brick work using old size sub class 'B' bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 all as specified and directed .

M&L non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 10 mm rendering in CM 1:3 complete all as directed.

M&L for 7-8 mm thick Glazed ceramic decorative type wall tiles (coloured) joint free, area of each tile exc 0.11 sqm but n exc 0.18 sqm as in vertical surfaces of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 10mm thick rendering in CM(1:3) complete all as specified and as directed.

S&F 18 - 20 mm thick granite slab cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 20mm screed bed in CM(1:6) completed all as directed.

S&F 18- 20 mm thick granite slab as in vertical surfaces cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 10mm rendering in CM(1:3) including dismantling old one completed all as directed.

S&F 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required completed all as specified and as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed completed all as specified and as directed.

S&F powder coated Aluminium door frame and operable shutter, windows and any type of partitions and ventilators with one or more rebates including jointing cleat for fixing etc , complete all as specified and as directed.

S&F counter sunk/ table top wash hand basin with sensor operated automatic water dispensing Brass CP swan neck pillar tap as approved, with all brass CP connected ascesories like coupling and waste pipe, connection pipe etc and fixed in position as per manufacturers instructions complete all as specified and as directed.

S&F vitreous china floor mounted coupled closet (Pedestal pattern) coloured including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittings complete all as specified and directed. (Make : PARRYWARE, Model : Cascade NXT / CERA, Model : CLAIR / HINDWARE, Model: CONSTELLATION or equivalent make specified in tender)

S&F Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : Ess-Ess, Cat No: AC-502 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / PRAYAG, Cat No: BA-11 or equivalent make specified in tender)

S&F s, Tubular towel rail (premium quality), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-101 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 / HINDWARE, Cat No: F840013or equivalent make specified in tender)

S&F 6mm thick moulded / bevelled decorative edge mirror of size as required fixed on 6mm thick acrylic PVC sheet complete fixed at walls with brass chromium plated camouflaged nut washer and bolt screws all as directed.

M&L for Taking down cement plaster in any description on brick or stone wall etc incl racking out joints. Hacking for key scrubbing down with water etc. complete all as specified and directed.

M & L brick work using old size sub class 'B' bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) to fair faces of brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed.

M&L for 10 mm thick rendering in cement mortar (1:4) to fair faces of brick or concrete ceiling surfaces finished even & smooth without using extra cement all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer over 2 mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer applied over over 2 mm thick wall care putty complete all as specified and directed.

M&L for applying two coats of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) over 2 mm thick wall care putty complete all as specified and directed.

Supply and fix, as , 15 mm bore bib taps, fancy type, chromium plated long neck cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified.

S&F s 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : AKP-35731P / PARRYWARE, Cat No: T6403A1 / ESS ESS, Cat No: AC-103 / PRAYAG, Cat No: BA-35 or equivalent make specified in tender)

S&F CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, Cat No: BEA-26equivalent make specified in tender).

S & F 15mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors complete all as directed.

S & F 20mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors complete all as directed.

S&F Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: C-206 / CERA, Model: OCEAN / PRAYAG, Cat No: 9210 / HINDWARE, Cat No: F330043equivalent make specified in tender).

M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed.

S&F 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : Ess Ess, Cat No: C-203 / JAQUAR, Cat No: CON-041KN/ PARRYWARE, Cat No: G1434A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9212/HINDWARE, CAT No: F330004CP equivalent make specified in tender).

Supply and fixing chromium plated toilet tumbler holder s (including with tumbler and chromium plated wall flange), fixing with stainless steel screws complete all as specified and as directed by the Engineer-in-Charge. (Make : Jaguar cat No. CAN 1141 N or its equivalent in make. ESS-ESS / ESSCO equivalent make specified in tender).

S&F s toilet paper holder, surface type with flap complete all as specified and directed. (Make : JAQUAR, Cat No : CAN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-506 / HINDWARE, Cat No: F880003equivalent make specified in tender)

S&F s towel rack (premium quality) with lower hangar with hook complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / ESS ESS, Cat No: AC-308 / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12equivalent make specified in tender))

Supply and fix s Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON equivalent make specified in tender)

Supply and fix s Low density polyethylene pipe connection, comprising of 15 mm dia 600 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON equivalent make specified in tender)

S&F Mono block water pressure pump set of capacity 0.50 HP single phase , discharge range 36-60 Lpm , working in voltage range 220-240 V with operating pressure range 1.4 -2.4 (Bar) complete including with closed discharge valve and connected fittings complete all as specified and as directed . Make: KILOSKAR - ETERNA, Model SJPBS 42420- HL or equivalent make specified in tender)

S&F s Chromium Plated 25mm dia brass chromium plated curtain rod with fixing brackets, stops, rollers etc as directed by Engr-in-Charge.

S&F s fancy type metal finish curtain bracket fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F Factory made single extruded fully solid WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).

S&F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.

S&F 150 mm Extruded brass handles, fabricated type polished complete all as specified and as directed.

S&F 200 mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F 200 mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F 140 mm Floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and as directed.

S&F Stainless steel sensor operated hand dryer of approved make complete all as specified and as directed.

S&F Stainless steel wall mounted tissue paper dispenser of approved make complete all as specified and as directed. Make : Jet India Cat part No JI-TDP-01 or equivalent make specified in tender)

S&F Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity with closed top and fixed in position as per SSR Part I instructions with including dismantling water tanks and removing to store capacity 1000 Ltrs all as directed by Engineer in charge.

Supply and fixing 5.5 mm thick sheet glass frosted on one side, area in squares exc 0.5 sqm in each pane and glazing with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed.

S&F Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed .

S & F 10 to 12 mm thick gypsum board false ceiling including 0.55 mm thick GI perimeter channel, GI channel tray frame work having one flange of 20mm and another flange of 30mm with web of 27mm, fixed to surrounding wall using nylon sleeves and screws @ 450mm centre to centre / GI intermediate channel of size 45mm x 0.90mm thick with two flange of 15mm each suspended from the soffit of roof slab/ truss @1220mm c/c with MS angle of suitable size fixed to soffit of ceiling with GI cleat and expansion fasteners with and including ceiling section ( not exc 1.2 metre length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 25 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel @ 457 mm centre to centre with necessary nuts and bolts and gypsum board screwed to ceiling section with stainless steel screws @ 230mm c/c including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces complete all as specified and directed.

Supply and fixed s 100mm wide decorative corner bead ( of approved design) made of plaster of paris, fixed with screws all as specified and as directed.

M&L for homogeneously fully Vitrified ceramic digital coloured (light shade) tiles, double charged, minimum 10 mm thick (square/ rectangular) polished, area of each tiles exc 1.00 Sqm but not exc 2.00 Sqm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade laid over and incl 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as a specified and as directed.

All as per item No.55 above, but light coloured double charged vitrified tiles as in skirting, fixed over and incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

Cutting holes into or through brick walls, area exc 400 Sq cm and n exc.10 Sq m built in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete complete all as specified and directed.

Cutting holes in to brick wall for inserting bold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exe half brick but not exe 1 brick. complete all as specified and directed.

S & F mild steel work holdfast, cleat etc. for door frame/ wooden batten etc. quality conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F Cast Iron , rain water socket pipes 100mm bore (dia), Sand Cast, in any Length with Ears, with Cement Joints in Cement Mortar 1:1, fixed to Walls/floor complete all as specified and as directed.

S&F 100mm dia CI bends or elbows, square or obtuse complete all as specified and as directed.

S & F 50 mm bore UPVC pipes (SCH-80) with all fittings and fixed to walls and ceiling or laid in floors complete all as directed.

Material and labour for 300mm X 450mm X 7mm thick decorative type wall tiles (coloured) joint free as in vertical surfaces of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 10mm thick rendering in CM(1:3) complete all as specified and as directed .

Supply and fix vitrified tiles(light shade) of 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in floor set and jointed in neat cement slurry @ 3 kg per Sqm and pointed in coloured cement to match the shade of the tiles over and incl. 20mm screed bed in CM (1:6) complete all as directed.

Supply and fix vitrified tiles (light shade) of 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles over and incl. 10mm rendering in CM (1:3) complete all as directed.

S&F Solid PVC Wall Lining consisting of5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

M&L 12 mm thick seamless water proof and termite proof WPC lovers wall panels, any colour, design and pattern as approved, fixed with probond adhesive and screwed to the wall etc., complete all as per manufacturer instruction, all as specified and directed.

M&L 4 mm thick water proof and termite proof charcoal wall panels, any colour, design and pattern as approved, pasted on 5.5 mm thick WPC white board fixed with probond adhesive and screwed to the wall etc., complete all as per manufacturer instruction, all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc all as specified and directed.

M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 for walls with including demolition of brick work / PCC block masonry or stone/Boulder masonry built in cement mortor incl all quoins arches pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and as directed.

M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair face of brick work or concrete surface in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even. complete all as specified and directed. ( Note -W.P.C. shall be measured and paid separately.)

Supply only integral water proofing compound all as specified and as directed.

M&L for preparing new plastered surface of walls and applying two coats of cement based paint over a coat of Chalk whiting primer painting including preparation complete all as specified and directed.

Supply and fix vitreous china wash basin, white, counter top, size 450 x 400 mm oval shape excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed. (Make : Jaguar or equivalent as approved by Accepting Officer).

S&F in repair 15mm dia fancy type chromium plated basin mixer foam flow screwed for iron pipe incl taking down old all as directed by Engr-in-Charge. (MAKE : ESS ESS, Cat No : C-211A / JAQUAR, Cat No : CON-167KNB / PARRYWARE, Cat No: G1414A1 / CERA, Model: OCEAN / PRAYAG, Cat No: 9250 / HINDWARE, Model: CONTESSA PLUS equivalent make specified in tender)

Supply & fix, as in repairs, brass chromium plated over head shower roses 125 mm size with or without swivel joint, including fixing to steel pipe or union all as specified and directed(Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ESS ESS, Cat No: OH-104A / HINDWARE, cat No: F160051equivalent make specified in tender)

S&F in repair Aluminium body ( extruded section ) door closer hydraulically regulated, designation No 3 , universal type suitable for door shutters of 851 to 1000 mmm in width and weight between 61 to 80 kg as directed by the Engr-in-Charge. (make : Godrej, Cat No. 1938 or equivalent make specified in tender)

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repair complete all as specified and as directed. Make : Ess Ess, Cat No AC207 or equivalent make specified in tender)

S & F in repair 15mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors complete all as directed.

S & F in repair 20mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors complete all as directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by Engr -in-Charge.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat or curved surface, in one or more layers, design and pattern as approved, including any sunk or raised mouldings, boarder beadings, fillets of any design as approved, over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified

M&L for 3mm thick wall care putty on ceiling including gap filling/crack avoiding fibre strips to make the surfaces completely smooth to receive ceiling finishes

M&L for preparation of newly plastered ceiling surfaces of any description and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer complete all as specified and directed by Engineer -in-Charge.

M&L for preparing old plastered surface of walls and applying one coat of cement based paint complete all as specified and directed by Engr -in-Charge.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc. and getting out in soft/ loose soil.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc. and getting out in soft/ disintegrated rock.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exc. 25cm in soft loose soil complete all as specified and directed.

Removing excavated material exc.250 m but n.exc.500 m and depositing complete all as specified and directed.

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.

M & L for plain cement concrete type C-2, 1:3:6 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M & L for rendering 10mm thick on brick wall or concrete surface in cement mortar (1:4) finish even and smooth without using extra cement complete all as specified.

M&L for hard core of gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and as directed.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

Plate girder or single stanchions ,Rolled sections as in main and cross beams, built up of beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.

S&F mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed.

S&F mild steel screw bolts neck dia 10 to 16mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n exc 15cm long complete all as specified and directed.

Mild steel bolts dia of neck exc 16 mm but n. exc 20 mm. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and as directed.

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.

M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.

S & F solar control film 25 micron reflective type (garware sun control or equivalent ) complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber packing handle 2 Nos in each door, hinges, Mortise lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc with 5.5 mm thick tinted glass ordinary quality as per manufactures instruction complete all as specified and directed. (NOTE: Quoted rate shall be deemed to include for all hardware, lock and sheet glass).

S&F 5.5 mm thick toughened frosted / coloured tinted glass fixed in aluminium / Upvc beads (beading included with shutter ) or as in hinge door , partition , windows , ventilator, automatic doors and similar work including cutting to shape, drilling holes as required complete all as specified and as directed.

M/L preparation of old surface and applying one coats of white wash on ceiling to match with the new one complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building).

M&L for preparation of new plastered surfaces of wall and applying two coat of acrylic distemper over a coat of alkali registant primer with 1 mm thick wall care putty. complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building).

M/L preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coat of oil emulsion distemper over a coat of alkali registant primer and one coat of wall putty to match with the new surface on wall. complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building).

(E/M Portion) Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing all as specified and directed.

Materials and Labour for surface type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing capping medium duty complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (a) One light point or one fan point or bell point controlled by one switch or bell push.

All as per item No 110 above but for one 5amp switch socket combination on independent board, complete all as specified and directed (surface type point wiring with terminal box).

All as per item No 110 above but for one 5amp switch socket combination on same board, complete all as specified and directed (surface type point wiring with terminal box).

All as per item No. 110 above but using 2.5 sqm single core multi stranded copper conductor FRLS PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 1.5 sqm green FRLS PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (surface type point wiring with terminal box).

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and as directed.

S & F Modular Switch 1 way 16 A, 1 module complete all as specified and as directed.

S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and as directed.

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and as directed.

S & F Modular Blank plate, 1 module complete all as specified and as directed.

S & F Modular type White cover plate with frame 3 module complete all as specified and as directed.

S & F Modular type White cover plate with frame 4 module complete all as specified and as directed.

S & F Modular type White cover plate with frame 6 module complete all as specified and as directed.

S & F Ceiling rose, 3 terminal PVC insulated body complete all as specified and as directed.

S & F exhaust fan 250 mm sweep, AC single Phase 230 / 240 volts, metal body with louver shutters and connecting up with and including twin core twisted flexible copper conductor cable of suitable dia ,nut bolt and accessories, and winding, pending etc connecting up including taking down with re -fixing provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 sqm , 3 core, 1100 Volts grade, from ceiling rose / connector to fan complete all as specified and directed.

S&F LED Bldg Security Light fitting 30W and bracket all accessories with pressure die cast housing toughened glass and individual LEDs with secondary optics and IP 66 protection as in repair complete all as specified and as directed.

S&F in repair picture LED lights with color temperature 3000 K suitable for 10 W metal and synthetic material lumen 500 lm complete all as directed Model: 48043/30/86 Make: of Philips or equivalent make specified in tender).

Supply and fix Wall mounted fan, PVC body AC single Phase. 230V of size 450m sweep Airboll high speed complete all as specified and directed. Make Havells/Usha/Crompton or equivalent make specified in tender).

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 15 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. Complete all as specified and directed.

Supply and Fixing in replacement of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armored electric power cable (heavy duty) with aluminium conductor (multistranded), 1100 volts grade connected with suitable cable gland and aluminium lugs of any size laid in trenches or passing through pipes including testing after laying, including taking up old UNSV cable complete of 16 Sqm, 4 Core size all as specified and directed by Engineer-in-Charge.

Supply and Fixing in replacement of following GI pipe light grade (ISI Marked) for cable protection along wall/pole/floor/road crossing etc complete including sealing of pipe ends with approved sealing compound including taking up old UNSV GI pipe of 50mm dia complete all as specified and directed by Engineer-in-Charge.

Taking down of old Submain wiring upto 10 sqm any type including batten/ conduit/ casing at any indicated situation.

M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqm as earth continuity conductor drawn through and including PVC casing-capping of suitable size, surface type all as directed.

All as per Srl. Item No. 131 above but with 2 run of 6.0 Sqm cable and 6.0 Sqm as earth continuity conductor.

All as per Srl. Item No. 131 above but with 2 run of 4.0 Sqm cable and 4.0 Sqm as earth continuity conductor.

S&F metal clad box enclosure with socket plug top and MCB SP 20 Amp flush of 240v mounting enclosure with 2 pin earth plug socket complete all as directed. (Make - Havells Hager/legrand)

Taking down of Old MCB DB any type any size including MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site.

S & F Double door sheet metal enclosure for DBs(Premium range) for mounting of MCB for 240 Volts 8 Way with 200 Amps rated copper bus bar, single pole and Neutral complete all as specified and directed.

Supply only MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

Supply only MCB, 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

B & R CONSTRUCTION

M A ENTERPRISES

M/s Santosh Industrial Corporation

DEYS ENTERPRISE

M/S SRINIVASA CONSTRUCTION

MS AP CONSTRUTION AND CO

KWALITY CONSTRUCTION

MODERN AGENCY