Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC | L1 | Accepted-AOC lowest | |
| 2 | L2₹37.0 L+₹3.6 L (10.9%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹42.6 L+₹9.2 L (27.6%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹43.9 L+₹10.5 L (31.5%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹44.5 L+₹11.1 L (33.2%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
| Sl No | Description | Qty | Unit | SANJEEV CONSTRUCTIONS L1 | S.S.ENGINEERING CORPORATION L4 | BHAGYARAM ENTERPRISES L2 | CHITRA ENGINEERING CORPORATION L5 | M/s K Venkateswara Rao L9 | SUN LIGHT HOUSE L7 | UNITY ENGINEERING TRADERS L6 | M.R.ENTERPRISES L8 | EXELLENT POWER CORPORATION L10 | M/S PAVANI ENTERPRISES L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Repair / maintenance of street / security/Flame proof lights any type, flood lights, post top lanterns or any other external lights in its position fixed on pole / high mast / building structure or by taking down to ground, if required, testing all the components / parts, wiring etc, identifying and replacing the defective components like, electronic driver (in case of LED lights), connector, connection wires/ cable, MCB etc including refixing the fitting to its original position (if taken down), including repair control timer & junction box all as directed by Engr-in-charge.
Note: (i) The rate against the above mentioned item is deemed for cost of labour and allied expenses only.
(ii) Spares such as, electronic driver, connector, connection wire, MCB, timer spares etc) replaced against above mentioned item will be measured & paid for separately under respective items of BOQ here-in-below. | 300 | Each | 459 ₹1,37,700 | 135 ₹40,500 | 95 ₹28,500 Lowest | 142 ₹42,600 | 175 ₹52,500 | 161 ₹48,300 | 157 ₹47,100 | 163 ₹48,900 | 180 ₹54,000 | 125 ₹37,500 |
| 1.01(iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily complaints received on the same day before 1730hrs to the JE E/M. (iv) The contractor has to rectify the defects / repair and make the street light functional within 24 hours from the time the list of defective street lights is handed over to him / his rep by the concerned JE E/M. In case the street light is not made functional for whatsoever reason within the specified time limit, an amount of Rs 150/- per such defective street light per day will be recovered from the amount due to him through RAR / Final Bill. The contractor shall carry out repair / maint work simultaneously for different areas by engaging separate team of electricians / technicians for DRDO Township/DSC/CHESS NAI area in order to ensure prompt & timely rectification of defects. | |||||||||||||
| 1.02(v) Contractor shall arrange requisite and cost sufficient number of transport and vehicle mounted hydraulic ladder at his own cost wherever required. (vi) The contractor shall maintain proper record of repair / maintenance in a binded register duly bringing out the details of spares replaced on each and every street light and get it authenticated from concerned JE E/M on daily basis. (vii) The contractor shall be fully responsible for the safety of his men engaged for executing this work and he will provide all requisite safety equipments and department shall not be responsible for any kind of mishap / accident / injury to his men. (viii) The contractor shall maintain sufficient stock of spares | |||||||||||||
| 2.00 | PVC insulated copper conductor FR grade 2.5 sqmm,three core cable, ISI marked. | 6 | Per Coil 100 Ft | 4,050 ₹24,300 | 3,802 ₹22,812 | 3,610 ₹21,660 Lowest | 3,841 ₹23,046 | 4,105 ₹24,630 | 3,895 ₹23,370 | 3,860 ₹23,160 | 3,915 ₹23,490 | 4,110 ₹24,660 | 3,755 ₹22,530 |
| 3.00 | PVC insulated copper conductor FR grade 1.5 sqmm,three core cable, ISI marked. | 4 | Per Coil 100 Ft | 2,700 ₹10,800 Lowest | 3,215 ₹12,860 | 2,882 ₹11,528 | 3,243 ₹12,972 | 3,365 ₹13,460 | 3,285 ₹13,140 | 3,265 ₹13,060 | 3,315 ₹13,260 | 3,370 ₹13,480 | 3,010 ₹12,040 |
| 4.00 | PVC insulated alluminium conductor FR grade 4 sqmm, two core flat cable, for service connections, ISI marked. | 2 | Per Coil 75 Ft | 819 ₹1,638 Lowest | 1,195 ₹2,390 | 995 ₹1,990 | 1,199 ₹2,398 | 1,325 ₹2,650 | 1,245 ₹2,490 | 1,210 ₹2,420 | 1,275 ₹2,550 | 1,331 ₹2,662 | 1,155 ₹2,310 |
| 5.00 | PVC insulated alluminium conductor FR grade 6 sqmm, two core flat cable, for service connections, ISI marked. | 2 | Per Coil 90 mtr | 2,700 ₹5,400 Lowest | 5,125 ₹10,250 | 4,715 ₹9,430 | 5,132 ₹10,264 | 5,241 ₹10,482 | 5,165 ₹10,330 | 5,145 ₹10,290 | 5,189 ₹10,378 | 5,246 ₹10,492 | 4,995 ₹9,990 |
| 6.00 | Re-stringing, tightening and fixing in position, the existing OH ACSR conductor LT Line phase with neutral and earth wire 230V, 2/3 wire by loosening and taking down existing binding wire from the insulator of any size of ACSR conductor and bringing it to required sag including provision of new binding wire and tightening of cross arms on each pole and required trimming of tree branches
Note: 1.Span length (any No of wires)of conductor shall be measured in running meter unit.
2.Unit rate quoted by the contractor shall be deemed to include for cutting and trimming branches of the trees coming in contact with ACSR conductor and separators as directed. | 400 | RM | 9 ₹3,600 Lowest | 85 ₹34,000 | 60 ₹24,000 | 86 ₹34,400 | 99 ₹39,600 | 91 ₹36,400 | 90 ₹36,000 | 95 ₹38,000 | 101 ₹40,400 | 79 ₹31,600 |
| 7.00 | Cutting/ trimming / punning tree branches overhanging or interfering or obstructing electrical pole or street lights in such a way that the clearance between Street light pole and tree branches should not be less than 3 mtrs around the Pole/Fitting complete all as directed.
Note: Quoted rate is deemed to include necessary hydraulic ladder arrangement and tree cutting machine and tools required at site. | 80 | Each Span | 225 ₹18,000 Lowest | 375 ₹30,000 | 320 ₹25,600 | 381 ₹30,480 | 416 ₹33,280 | 399 ₹31,920 | 400 ₹32,000 | 405 ₹32,400 | 421 ₹33,680 | 365 ₹29,200 |
| 8.00 | M&L for scrapping down and removing of old deteriorated paint from steel tubular poles LT preparing surface for painting and applying black & yellow paint strips of 30 cms each upto 1.5 m above the PCC and applying one coat of red oxide and two coats of aluminium paint for the remaining height of pole including MS clamps, GI bracket, fittings etc and marking of pole No, 2m above the PCC muff, letter shall not be more than 6 cm height with 16 cm dia circle around the marked No. complete all as directed.
Note : Quoted rate is deemed to include removal of any type of boards, direction plates etc and refixing the same after painting | 200 | Each | 351 ₹70,200 | 255 ₹51,000 | 220 ₹44,000 Lowest | 261 ₹52,200 | 295 ₹59,000 | 281 ₹56,200 | 275 ₹55,000 | 287 ₹57,400 | 291 ₹58,200 | 245 ₹49,000 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
5 Jul 2025, 6:00 pmClosed
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
REPAIR/MAINTENANCE OF SECURITY LIGHTS, FLOOD LIGHTS, HIGH BAY LIGHTS, LANDSCAPE LIGHTENING AND ALLIED WORKS OF DRDO TOWN SHIP, NAI, CHESS AND ADJACENT AREA UNDER GE (I) RND KANCHANBAGH, HYDERABAD
2025_MES_709443_2
8938
Open Tender
Civil Works
Item Rate
270 days
HYDERABAD
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹80,000
Yes
15 Sept 2025
23 Jun 2025
7 Jul 2025
23 Jun 2025
5 Jul 2025
30 Jun 2025
Amount
Repair / maintenance of street / security/Flame proof lights any type, flood lights, post top lanterns or any other external lights in its position fixed on pole / high mast / building structure or by taking down to ground, if required, testing all the components / parts, wiring etc, identifying and replacing the defective components like, electronic driver (in case of LED lights), connector, connection wires/ cable, MCB etc including refixing the fitting to its original position (if taken down), including repair control timer & junction box all as directed by Engr-in-charge. Note: (i) The rate against the above mentioned item is deemed for cost of labour and allied expenses only. (ii) Spares such as, electronic driver, connector, connection wire, MCB, timer spares etc) replaced against above mentioned item will be measured & paid for separately under respective items of BOQ here-in-below.
(iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily complaints received on the same day before 1730hrs to the JE E/M. (iv) The contractor has to rectify the defects / repair and make the street light functional within 24 hours from the time the list of defective street lights is handed over to him / his rep by the concerned JE E/M. In case the street light is not made functional for whatsoever reason within the specified time limit, an amount of Rs 150/- per such defective street light per day will be recovered from the amount due to him through RAR / Final Bill. The contractor shall carry out repair / maint work simultaneously for different areas by engaging separate team of electricians / technicians for DRDO Township/DSC/CHESS NAI area in order to ensure prompt & timely rectification of defects.
(v) Contractor shall arrange requisite and cost sufficient number of transport and vehicle mounted hydraulic ladder at his own cost wherever required. (vi) The contractor shall maintain proper record of repair / maintenance in a binded register duly bringing out the details of spares replaced on each and every street light and get it authenticated from concerned JE E/M on daily basis. (vii) The contractor shall be fully responsible for the safety of his men engaged for executing this work and he will provide all requisite safety equipments and department shall not be responsible for any kind of mishap / accident / injury to his men. (viii) The contractor shall maintain sufficient stock of spares
PVC insulated copper conductor FR grade 2.5 sqmm,three core cable, ISI marked.
PVC insulated copper conductor FR grade 1.5 sqmm,three core cable, ISI marked.
PVC insulated alluminium conductor FR grade 4 sqmm, two core flat cable, for service connections, ISI marked.
PVC insulated alluminium conductor FR grade 6 sqmm, two core flat cable, for service connections, ISI marked.
Re-stringing, tightening and fixing in position, the existing OH ACSR conductor LT Line phase with neutral and earth wire 230V, 2/3 wire by loosening and taking down existing binding wire from the insulator of any size of ACSR conductor and bringing it to required sag including provision of new binding wire and tightening of cross arms on each pole and required trimming of tree branches Note: 1.Span length (any No of wires)of conductor shall be measured in running meter unit. 2.Unit rate quoted by the contractor shall be deemed to include for cutting and trimming branches of the trees coming in contact with ACSR conductor and separators as directed.
Cutting/ trimming / punning tree branches overhanging or interfering or obstructing electrical pole or street lights in such a way that the clearance between Street light pole and tree branches should not be less than 3 mtrs around the Pole/Fitting complete all as directed. Note: Quoted rate is deemed to include necessary hydraulic ladder arrangement and tree cutting machine and tools required at site.
M&L for scrapping down and removing of old deteriorated paint from steel tubular poles LT preparing surface for painting and applying black & yellow paint strips of 30 cms each upto 1.5 m above the PCC and applying one coat of red oxide and two coats of aluminium paint for the remaining height of pole including MS clamps, GI bracket, fittings etc and marking of pole No, 2m above the PCC muff, letter shall not be more than 6 cm height with 16 cm dia circle around the marked No. complete all as directed. Note : Quoted rate is deemed to include removal of any type of boards, direction plates etc and refixing the same after painting
S&F in repairs automatic timer switch distribution board, factory assembled in powder coated sheet steel enclosure, single Phase, suitable for 6KW load, comprising of 32 Amps, 3 Pole, MCB SPN, 40A power contactor and 230V digital timer switch for controlling street lights outdoor type, including angle iron base and stand for fixing the panel with suitable PCC foundation as per site requirement.
S&F in repairs automatic timer switch distribution board, factory assembled in powder coated sheet steel enclosure, suitable for 12KW load single phase comprising of 65 Amps SP MCB, 63A power contactor and 230V digital timer switch for controlling street lights, including angle iron base and stand for fixing the panel with suitable PCC foundation as per site requirement. Note:- Rate quoted shall be inclusive of necessary excavation & earth work and PCC foundation.
S&F in repairs SMC junction boxes (weather proof) IP 66, on street light poles made out of thermoplastic of size not less than 375mm x 262 mm x 155 mm size with connector for connecting incoming and outgoing of cable including provision of 01 No of MCB SP 06 Amps to control the pole light circuit and MS brackets made out of 32 x 4 mm flat for fixing the box on post complete with nuts, bolts and washers and suitable size of double compression cable glands for incoming, outgoing of cable Complete all as directed.
S&F in repairs of LED 45 watt street light fitting made up of pressure die cast housing with toughened glass and individual LEDs with street optics and IP 66 protection, 6500K including fixed to pole/wall with necessary MS clamp & accessories complete all as directed.
S&F in repairs LED street light 60 W secondary optics made in pressure die cast housing and heat shrink in aluminium extrusion and IP 66 protection, 5700K color temperature fixing to the bracket or street light pole with necessary nuts and bolts as required at site complete all as directed.
S&F in repairs LED street light 90 W secondary optics made in pressure die cast housing and heat shrink in aluminium extrusion and IP 66 protection, 5700K color temperature fixing to the bracket or street light pole with necessary nuts and bolts as required at site complete all as directed.
S&F in repairs LED street light 100 W secondary optics made in pressure die cast housing and heat shrink in aluminium extrusion and IP 66 protection, 5700K color temperature fixing to the bracket or street light pole with necessary nuts and bolts as required at site complete all as specified and directed.
S&F in repairs LED street light 120 W secondary optics made in pressure die cast housing and heat shrink in aluminium extrusion and IP 66 protection, 5700K color temperature fixing to the bracket or street light pole with necessary nuts and bolts as required at site complete all as directed.
S&F in repairs LED street light 150 W secondary optics made in pressure die cast housing and heat shrink in aluminium extrusion and IP 66 protection, 5700K color temperature fixing to the bracket or street light pole with necessary nuts and bolts as required at site complete all as directed.
S&F in repairs LED street light 250 W secondary optics made in pressure die cast housing and heat shrink in aluminium extrusion and IP 66 protection, 5700K color temperature fixing to the bracket or street light pole with necessary nuts and bolts as required at site complete all as directed.
AMC including GPRS charges, software hosting, network monitoring and remote support for energy metre (Make : L&T) . The SLA would be as follows: (i) Resolution of server down – within 8 hrs (ii) Resolution of username and password – within 48 hours (iii) Resolution of non-availability of meter data after informing – 10 days (iv) Resolution of software issues – within 24 hrs. Note : The contractor would need to have an agreement with the OEM or OEM partner to provide AMC and submit the agreement copy to the concerned Engineer in charge. Note :- (a) Meter reading dates if not found getting in this office from any meters the penality of double the amount of AMC will be recived in each meter. (b) repair and replacement of the DOUs and faulty meter is scope of contractor.
S&F in repairs LED 150 watt flood light fitting made up of pressure die cast housing with toughened glass and individual LEDs with street optics and IP 66 protection, 5700K including fixing to pole/wall with necessary nuts, bolts and washers complete all as directed.
Supply & Fixing LED flood lights 60 watts230 V AC outdoor type with thermal management in multiple optics IP 66 Luminaire with aluminium die casting,toughened glass and unique lens system for enhanced illumination and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp including removal of existing & complete all as directed
Supply & Fixing LED flood lights 80 watts230 V AC outdoor type with thermal management in multiple optics IP 66 Luminaire with aluminium die casting,toughened glass and unique lens system for enhanced illumination and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp including removal of existing & complete all as directed
Supply & Fixing LED flood lights 100 watts230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and unique lens system for enhanced illumination and lamp including removal of existing & complete all as directed.
Supply & Fixing LED flood lights 120 watts230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and unique lens system for enhanced illumination and lamp including removal of existing & complete all as directed
S&F in repairs LED 200 watt highbay light fiitting made up of pressure die cast housing with toughened glass and individual LEDs with IP 66 protection, 5700K including fixing to High mast pole/truss with necessary nuts, bolts and washers complete all as directed.
S&F in repairs Integral LED bollards 8 watt with opal acrylic diffuser made of extruded aluminium housing and IP65 protection including PCC foundation with suitable phospher bronze/GI nuts and bolts for fixing the bollard as per site requirement complete all as directed Note:- Rate quoted shall be inclusive of necessary excavation and concrete required.
Supply & Laying, jointing & testing of XLPE UG LT cables, insulated, PVC sheathed aluminium conductor multi stranded armoured heavy duty 1100 Volt grade laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs for the following cable sizes all as directed.
10 sqmm 4 core
16 sqmm 4 core
25 sqmm 3.5 core
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables and getting out in soft/loose soil complete all as directed.
Returning, filiing in, including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick each, using soil complete all as directed.
Removing excavated surplus soil obtained from excavation to a distance not exceeding 1.5 m above the starting point, complete all as specified.
Supply and laying in repairs corrugated HDPE pipe of 40mm dia for cable protection confirming IS-14930 1 & 2 , in trenches or fixing to the pole with necessary accessories complete all as directed. Make:Astral/Sudhakar or equalent ISI certified manufacturer.
S&F in repair light grade GI pipe bracket of 40/32mm dia, 1.2mtr long, bent to shape for street light fitting fixed on pole using new 2 Nos FI clamps, nuts, bolts and washers complete all as directed.
M& L for repair of highmast lights by taking down the light assembly by motor operation or mannually, taking out defective parts and fixing the highmast light in its original position after repairing all as directed by Engineer in charge Note : defective cabel, wire and lights will be measured and paid separately in relevant items of work.
Earthing with GI plate electrode 600x 600x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below normal ground level with top edge of earth plate, not less than 1.5 mtr below normal ground level connected to GI wire of size 4 mm by means of bolts, nuts/check nuts and washers etc of galvanised iron, protected by 15 mm dia galvanised iron pipe, light grade upto a length of 7.5 mtr away from earth electrode and connected to main switch/control board including necessary excavation earth work in any type of soil and PCC 1:3:6 type C1 for earth chamber, 40 mm thick RCC cover slab 1:2:4 type B1 with 8 mm dia TMT Bars at 140 mm c/c both ways,GI funnel, wire mesh, lugs, charcoal and salt etc complete all as shown in Electrical plate No. 3 of SSR Part I and testing complete including removing unserviceable earthing material complete all as directed. Note : GI earth wire beyond 7.5 metres will be measured and paid separately.
S&F in repairs galvanised steel earth wire of 4mm dia on the over head LT pole with the help of aluminium tapes/ binding wire and necessary clamps for fixing the earth wire, providing the required sag for avoiding tension in earth wire complete all as directed.
S&F cable jointing kit for straight through joint (epoxy) for 1.1 KV grade suitable for 3.5 coreXLPE, PVC insulated and sheathed aluminium conductor under ground cable including thimbles, nuts & bolts, washers etc and testing after jointing complete, all as directed upto 50 sqmm size.
S&F cable jointing kit for straight through joint (epoxy) for 1.1 KV grade suitable for 3.5 coreXLPE, PVC insulated and sheathed aluminium conductor under ground cable including thimbles, nuts & bolts, washers etc and testing after jointing complete, all as directed 70 to 95 sqmm size.
M&L 11KV grade suspention type, composite polymeric insulator insulator of clevis/Tounge/socket or ball type spindle including nuts and bolts of size type as specified by the manufacturer conforming IS- 61109 including all galvanised steel disc fitting
S&F in repairs stay assembly complete with accessories as shown in electrical plate No.1 of SSR part I including loop type insulator, stay clamps, stay strands, excavation & earthwork and PCC work complete all as specified and directed. Note:- Rate quoted shall be inclusive of necessary excavation & earthwork and concrete as required.
M&L for painting the pole number on the LT/Street Light pole in circular shape with black synthetic enamel paint background and white synthetic enamel painted letters. Note:- The numbers and words shall be all as directed by the Engineer-in-charge.
S&F Electronic driver for 25 watts LED security light fittings
S&F Electronic driver for 35 watts LED security light fittings
S&F Electronic driver for 45 watts LED road way/Flood light/post top
S&F Electronic driver for 50 watts LED road way/Flood light/post top
S&F Electronic driver for 60 watts LED road way/Flood light/post top
S&F Electronic driver for 90 watts LED road way/Flood light/post top
S&F Electronic driver suitable for 100watts LED street light/Flood light fittings.
S&F Electronic driver suitable for 120watts LED street light/Flood light fittings.
S&F Electronic driver suitable for 150watts LED street light/Flood light fittings.
S&F Junction box, with cover and outlets including aluminium bus bars four nos with suitable holes for taping , GI Strap ,washers, nut and bolts and all as directed by Engr - In - charge.
PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in coping including use of form work(straight or curved), weathering , slightly rounded or chamgerged angles and throating, as directed complete all as specified and directed.
PCC 1:4:8 type D2 using 40mm graded stone aggregates as in foundation including use of form work(straight or curved), weathering , slightly rounded or chamgerged angles and throating, as directed complete all as specified and directed.
S&F in repairs post top lantern LED type 15 watt 230 watts volts AC outdoor type with decorative post top for 360 degree indirect light IP65 protection with impact and corrosion resistant complete with driver and lamp along with necessary wiring, accessroies complete all as directed.
Supply and lay GI tubing 40 mm dia, light grade for cable protection at road crossing/on poles and tubing sealed at bith ends after laying the cables including taking out old GI tubing complete all as directed.
S&F LED strip plate for repair of 25 watts LED security light fittings
S&F LED strip plate for repair 35 watts LED security light fittings
S&F LED strip plate for repair 45 watts LED road way/Flood light/post top
S&F LED strip plate for repair 50 watts LED road way/Flood light/post top
S&F LED strip plate for repair 60 watts LED road way/Flood light/post top
S&F LED strip plate for repair 90 watts LED road way/Flood light/post top
S&F LED strip plate for repair 100watts LED street light/Flood light fittings.
S&F LED strip plate for repair 120watts LED street light/Flood light fittings.
S&F in repair aluminium conductor steel reinforced any size in over head lines on LT/ HT poles including stretching the aluminium conductor and binding with binding wires of aluminium or aluminium tapes etc. Jumpers and connections, complete all as specified and directed by Engr-in-charge.
S&F in repair the street light timer installed at site by checking the timers and replaceing the defective timer swich, contactors, lugs, switch etc whichever required to make operational the timer switches complete all as specified and directed by Engr-in-charge.
BHAGYARAM ENTERPRISES (BID ID -3346635)
M/S PAVANI ENTERPRISES (BID ID -3345390)
S.S.ENGINEERING CORPORATION (BID ID -3345254)
CHITRA ENGINEERING CORPORATION (BID ID -3346688)
UNITY ENGINEERING TRADERS (BID ID -3347829)
SUN LIGHT HOUSE (BID ID -3347708)
M.R.ENTERPRISES (BID ID -3347605)
M/s K Venkateswara Rao (BID ID -3346930)
EXELLENT POWER CORPORATION (BID ID -3347303)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .