REPAIR MAINT TO JOINERY PLUMBING FLOORING ROOF COVERING BRICK WORK AT ANIMAL LINE STABLES IN POCKET 9 UNDER AGE B R III SAHARANPUR IN GE ROORKEE

Amount

Materials and labour, brick work with sub class ‘B’ bricks straight curved on plan exceeding 6 meter mean radius with old size bricks built in CM 1:6, including demolition of old bricks in cement mortar complete all as specified & as directed.

All as per item 1 here-in-above but except bricks complete all as directed. Note :- Serviceable bricks obtained from demolition against item no 1 here-in-before shall be reused.

Taking down old cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing downwith water, etc complete all as specified.

M & L for rendering 12mm thick on wall in CM 1:3 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick in CM 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) including preparation of new plaster surfaces of wall and applying three coats white wash complete all as specified and directed.

M & L for rendering 12mm thick on wall in CM 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement including preparation of new plaster surfaces of wall and applying three coats white wash complete all as specified and directed.

M&L for mud Plastering 25 mm thick and rigid surfaces except rubble masonry (in one coat) on horizontal surfaces,complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level)complete all as specified and directed.

PCC 1:2:4 type B-1 using 20 mm grade stone aggregate as in coping, weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in floor etc 75 mm thick finished even and smooth without using extra cement complete all as specified and directed.

M&L PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in floor etc 100 mm thick finished even and smooth without using extra cement laid in alternate bays, with spike rolling to surfaces or making impression of expended metal whilst the concrete is green complete all as specified and directed.

Dismantling of brick in floor laid dry on flat or on edge as in floor complete all as specified.

M&L for sub class A old size bricks laid on edge in floor, laid dry include for laying on and including 25mm thick layer of sand and filling the joints with same. complete all as specified.

M&L for sub class A old size bricks laid on edge in floor, laid dry include for laying on and including 25mm thick layer of sand and pointed with cement mortar 1:3 complete all as specified.

M&L for sub class A old size bricks laid on edge in floor, laid dry include for laying on and including 25mm thick layer of sand and filling the joints with same (except brick).complete all as specified.

Dismantling asbestos cement corrugated, semi corrugated, ridge etc sheets in roof covering complete all as specified & as directed.

M&L 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs , wall etc fixed with J-type or cranked hook bolts complete all as specified and directed.

M&L asbestos cement serrated ridges for corrugated sheets or semi corrugated sheets fixed with L or J type or cranked hook bolts, complete all as spfd & directed.

Fixing only 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs , wall etc fixed with J-type or cranked hook bolts complete all as specified and directed.

Dismantling plain of corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked bolt and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F .63 mm plain galvanized mild steel sheeting in ridges , hips, valley gutters, drips and straight flashing (Length and Girths as fixed) with grade of zinc coating 275 complete all as specified and directed.

Fixing only 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked bolt and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

Dismantling of wrought Iron or mild steel work of any description not otherwise provided for such as wind ties, valley gutter, supports steel windows etc complete all as specified and directed.

Dismantling of timber scantling under 40 sqcm in purlins etc complete all as specified & as directed.

S&F wind ties/purlins fixed independently for roof including securing bolts, flat iron fillets(for securing weather boarding with screw bolts and nuts) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 410-0 or Fe 310-0 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

S&F sections as in main and S&F Tubular beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified & as directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified & as directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified & as directed.

M&L framed work such as grills etc with ends of bars shouldered and or riveted or forged into spike; framed guard bars and similar work conforming to Fe 410-0 0r Fe 310-0.

S&F 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified & as directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples as in repair complete all as specified & as directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples as in repair complete all as specified & as directed.

M & L for 300 x 200 x 7mm thick glazed coloured (Digital colour) ceramic tiles on vertical surface of such as skirting, dados and risers to steps etc., including 10mm thick rendering in CM 1:3 on brick or concrete surface finished rough to received dado/ skirting, set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade including dismantling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed.

Taking up or down 15mm steel tubing and connections incl cleaning for re-fixing or removal to store complete all as specified and directed

Taking up or down 20mm steel tubing and connections incl cleaning for re-fixing or removal to store complete all as specified and directed

S&F tubes med grade 15 mm bore galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed

S&F tubes med grade 20 mm bore galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed

S&F in repairs bib tap 15mm dia cast iron plug type with brass spindle confirming to relevant IS complete all as specified.

M&L for preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified.

S&F for Providing and fixing tiled false ceiling of designer tiles ( high pressure steam cured) of 4 mm thickness (as per IS : 14862) of size 595x 595mm and any one of the design ( cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel section ( galvanized @ 120 Grms, both side inclusive and black painted groove on all 'T' webs) consisting of main 'T' runner with suitably spaced joints to get required length and 15 x 32 made from 0.3mm thick sheet, 1200mm long spaced between main 'T' at 600mm C/C to form a grid of 1200 x600mm and secondly cross 'T' of length 600 mm and size 15 x32 mm made of 0.30mm thick sheet to be interlocked at middle of 1200 x 600 mm panel to form girds of 600 x 600mm and wall angle 15 x20x 0.36mm and laying false ceiling tiles in the grid including required cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended form ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners , GI adjustable rods of 3 mm dia with galvanised butterfly level clips , spaced at 1200mm c/c along main 'T' bottom exposed width of 15mm of all 'T' section shall be prepainted with politer paint and black painted grove at centre of size 4.0 mm depth and 4.5mm width, including dismantling of old ceiling complete, all heights as per direction of EIC. Make :- Everest/ Armstrong/ Gypsum India Ltd.

S&F powder coated Everest ceiling rid system of grid size 600x600 mm fixed to walls with rawl plugs and screws and hang to roof members with 4 mm dia GI wire comperising main tee of size 38 mm x 24 mm x 0.30 mm , Cross tee of size 28 mm x 24 mm x 0.30 mm and wall angle of size 24mm x 24 mm x 0.40 mm with and including S&F of 4 mm thick Everest designer ceiling (E-board classic) board/ tiles for insulation and acoustic purpose 595 x 595 mm size fixed with staples on snap grid as in ceiling , including dismantling of old ceiling complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over 20 mm thick cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish,including dismentling of old tiles with cement mortar bedding and removing off the premises complete all as specifed and directed complete all as specified and directed

M&L for Kota stone slab 20-25 mm thick in skirting, etc over 15 mm thick cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, including dismentling of old tiles with cement mortar bedding and removing off the premises complete all as specifed and directed.

PANWAR CONSTRUCTIONS

VERDHMAN ASSOCIATES

M/s Inderlal

M/S. DEV ASSPOCIATES

M/S IRFAN AHMAD CONTRACTOR

shreyansh construction

RAM PRAKASH AND ASSOCIATES