REPAIR/ REPLACEMENT OF UNSV WATER HEATING SYSTEM WITH CONNECTED ITEM, SOLAR HEATING SYSTEM, SIGN BOARD, BED HEAD PANEL, HEAT PILLARS, HEAT CONVERTORS AND OTHER MISC E/M WORKS UNDER GE (EAST) DELHI CANTT-10

Amount

Attending the complaints for Water heater geyser of Capacity 25/ 35/ 50 Ltrs at different location of Base Hosp area including tracing & rectify the fault of system, incl checking incoming/outgoing hot & cold water supply connection, electric connection of geysers including replacement of unserviceable parts, complete all as specified and as directed. Note: . 1.The spare parts required for repairs shall be measured and paid separately under respective item of this Schedule. 2. Contractor should submit the complaint slip at the time of RAR. Note : The spare parts required for repair shall be measured and paid separately as " Supply and Fix" under respective item of this schedule.

Taking down the geyser from its existing position for general cleaning/overhauling and descaling the tank and assembly with suitable detergent and making fully serviceable and refixing in new/old position complete with testing, complete all as specified and as directed. Note: The spare parts required for repairs shall be measured and paid separately as "Supply and Fix" under respective item of this Schedule.

Supply and Fix in replacement fusible plug type (pressure valve) Air release valve complete all as specified and as directed.

Supply and Fix in replacement air release valve (Nozzle) as per sample complete all as specified and as directed.

Supply and Fix in replacement gasket of thickness 5 mm for geyser assembly of 06 holes/ 08 holes / 09 holes complete all as specified and as directed.

Supply and Fix in replacement Syphon assembly of copper, 06 holes with nut bolts/stud/washer complete all as specified and as directed.

Supply and Fix in replacement of indicating lamp green/ red for geyser rectangular type/round type complete all as specified and as directed.

Supply and Fix in replacement inner shell of Geyser of cap 25 Litre made out of stainless steel tank, complete all as specified and as directed.

Supply and Fix in replacement inner shell of Geyser of cap 35 Litre made out of stainless steel tank, complete all as specified and as directed.

Supply and Fix in replacement inner shell of Geyser of cap 50 Litre made out of stainless steel tank, complete all as specified and as directed.

Supply and Fix outer body of Geyser Capacity 25/ 35/ 50 Litre of 20 SWG MS Sheet and woolen glass duly painted, complete all as specified & directed.

Supply and Fixing of five star rated Geysers white blue in colour capacity 25 Ltr, Electric Driven, Single phase, 240 V, Storage vertical type and heating element 2 KW, inner shell made up of copper, automatic cutoff,manual tempreture setting , maintaining 8 bar pressue including electrical and water connection with hot and cold water connection pipe (PVC type) and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts complete all as specified and directed. Make : Bajaj/ Havells/ Crompton.

Supply and Fix in replacement thermostat switch of geysers (adjustable type) temp range 35 Degree Celsius to 75 degree Celsius complete all as specified & directed. Make- THEETA/BAJAJ/RECOLD/DASPASS

Supply and Fix in replacement heating element 1.5 KW (round type) with rubber gasket complete all as specified & directed. Make- Theeta/Bajaj /Recold/ DASPASS (As per sample)

Supply and Fix in replacement heating element 2.0KW (round type) with rubber gasket complete all as specified & directed. Make- Theeta/Bajaj /Recold/ DASPASS (As per sample)

Supply and Fix in replacement heating element 1.5 (triangle type) with rubber gasket complete all as specified & directed. Make- Theeta/Bajaj /Recold/ DASPASS (As per sample)

Supply and Fix in replacement heating element 2.0 (triangle type) with rubber gasket complete all as specified & directed. Make- Theeta/Bajaj /Recold/ DASPASS (As per sample)

Supply and Fix in replacement 15mm size PVC connection pipe 600mm long heavy duty with brass nut for hot/cold water complete all as specified & directed.

Supply and Fix in replacement 15mm size PVC connection pipe 450mm long heavy duty with brass nut for hot/cold water complete all as specified & directed.

Supply and Fix in replacement brass chromium plated angle valve suitable for 15 mm bore pipe complete all as specified and as directed.

Supply and Fix in replacement 15mm size brass CP extension nipple complete all as specified & directed.

Supply and Fix in replacement 15 mm size Brass CP Angle valve 2 in 1 complete all as specified & directed. Make-Zim/ Parko/Kingston)

Supply and Fix dash fastener mild steel 150 mm long x 10 mm dia with pin and bolts complete for hanging of geyser properly on wall and making good to the disturbed surfaces including plastering and white washing complete all as specified and as directed.

Taking down geyser from existing location, preparation of body of geyser by knotting and stopping of outer surface, repainting the complete outer surface of geyser with minimum two coat of synthetic enamelled paint 1st quality and refixing the same on wall in existing location and writing "AGE E/M BHDC with Location" of letter size 10 mm, complete all as specified and as directed.

M&L for unscrewing the nut bolt and taking out the base plate geyser assembly and copper tank making soldering and brazing of tank to stop the leakage of tank and fixing back in the position complete all as specified & directed.

Supply and Fix in repair PVC insulated unsheathed copper wire of size 4.00 Sqmm 3 core, complete all as specified & directed.

Supply and Fix in replacement Syphon assembly of copper, 09 holes with nut bolts/stud/washer complete all as specified and as directed.

Supply and Fix in replacement thermostat cut out of geysers (adjustable type) temp range 35 Degree Celsius to 75 degree Celsius complete all as specified & directed. Make- THEETA/ BAJAJ/ RECOLD/ DASPASS.

Supply and Fix in replacement of electrical backup 3 KW capacity heavy duty 18 Inch with thermostat for solar water heating system complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

Supply and Fix in replacement of solar toughened glass for solar water heating system complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

Supply and Fix in replacement of Air Vent for solar water heating system complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

Supply and Fix in replacement of MT for solar water heating system complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

Supply and Fix in replacement of Thermostat for solar water heating system complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

Supply and Fix in replacement of makeup tank for solar water heating system complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

Supply and Fix in replacement of Ball Cock for solar water heating system complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

Supply and Fix in replacement of SOLAR PANEL EDPM Hose Pipe for solar water heating system complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

Supply and Fix in replacement of Gate Valve for solar water heating system complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

Supply and Fix in replacement of solar ETC tube for solar water heating system complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

Supply and Fix in replacement of solar collector brazzing for solar water heating system complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

Supply and Fix in replacement of EPDM Gasket for solar water heating system complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

Supply and Fix in replacement of solar descaling for solar water heating system complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

M&L for servicing of solar water heating system of any capacity including cleanning, checking all loose electrical connection, water connection, complete all as specified and directed. Make : Tata Solar/ V-Guard/ Intro Solar.

Supply and Fixing in replacement LED Strip light for perfect ambiance to use indoor having lumen output of 800 lumen protected with IP 65 complete having 120 LED per meter complete with output short circuit protection, surge voltage protection up to 2.5 KV in warm white(3000 K), Power factor greater than 0.9 , CRI (Ra) greater than 80, System with average life of 50000 burning hours complete flexible slim and compact applicable for bendable and agled pattern or in continous row complete all as specified and as directed. Supply and Fixing LED Strip isolated electronic driver complete all as specified and as directed. Design, supply , fabrication and fixing of sinage board (120 inch X 42 inch ) size using words made of acrylic cutout letters and reflective vinayal sheet same as the existing one all as specified and directed by engg-in-charge. 1.Board shall be fabricated with 3mm thick ACP sheet in shining black colour.Powder coated Aluminium sheet shall be fixed from the rear side of the entire board to make box section. 2.Logo letters(English) shall be made of Acrylic cutout letter and shall be uniformaly illuminated by LED light. Font of letter is same as the existing one with font size of 27 inch. 3.Powder coated aluminium clips and brackets shall be used of minimum 3 mm thickness as per direction of Engineer - in - charge. 4.Word of signage board shall be fixed using reflective vinayl cutout letter.

Supply and fix surface mounted Bed head panel for patient bed duly powder coated finish, aluminium extruded (aluminium grade 6063/T-6, Profile HP-4E, complete with medical gas outlet , provision of 6 Nos of 15 Amp socket with switch , Provision of nursing call bell, complete with down side patient bed LED Light of size 1200 x 200 x 65 mm complete in all aspect all as specified and as directed.

Supply and fix in replacement heat convector of 2000 watt capacity ccomplete in all aspect all as specified and as direced. Make : Havells/ Crompton/ Bajaj.

Supply, fixing, testing & Commissioning in repair outdoor type, area wall illumination lighting, 20-30W LED FIXTURE, RGBW (4in1 LED) (DMX 512 Compatible), IP 66 rated, consisting of light weight housing, made of high strength aluminium and coated by static powder, weather resistant, Protection screen in ultra white tempered glass with high impact resistance (=>IK08), High precision dial to ensures precision angle adjustment, Pure Polyester powder coating in Standard Grey Colour, Precise structure and multi-protection silicon rubber seal, Length-1000mm, Height – 66mm, Width.-64mm, Weight - 4Kgs, Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate, Electronic Power Supply for LED Module, for Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Light fixture shall be standard DMX512 protocol compatible, the DMX decoder function shall be inbuilt the light fixture, Each light fixture shall be individually addressable & shall be able to operate with any standard DMX512 equipment. Lens shall be made of PC which shall offer 3 different beam angles 12deg./35deg./25deg.x45deg. to serve different lighting needs. Estimated LED Lifetime is L70-50,000 hours minimum.LM80 report from LED Manufacturer should be submitted at the time bid submission. BIS Safety test report as per IS10322 from 3rd party NABL lab should be submitted at the time bid submission. BIS Certificate with manufacturer same as brand and manufacturer address of indian origin should be submitted at the time bid submission. Minimum Light fixture Lumen output is 1400Lumens. OEM Authorization to contractor should be submitted. Sample Should be submitted for concerned engineer incharge for approval of light fixture. Make : NERI/ GVA Lighting/ Lumen Pluse. Note :- The installation & testing shall be carried out in the presence of rep of OEM and contractor.

Supply, fixing, testing and Commissioning in replacement outdoor type, wall illumination lighting LED FIXTURE 25-35W,LED,3000k,IP 66 Light, consisting of light weight housing made of high strength die cast aluminium and coated by static powder, to make it weather resistant, protection screen in ultra white tempered glass with high impact resistance. High precision dial to ensures precision angle adjustment. Premium thermal management by high heat conductivity aluminium alloy and thermal fins. Pure Polyester powder coating in Standard Grey Colour. Precise structure and multi-protection silicon rubber seal guarantees the fixture IP66 rated. Height – 176mm, Dia.-170mm, Weight - 2.0Kgs Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate. CRI > 80(for white),P.F>0.9,voltage input AC100-277V,50/60Hz. In-Built Electronic Power Supply for LED Module, to ensure Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Lens shall be made of PC. Estimated LED Lifetime is L70-50,000 hours minimum.LM80 report from LED Manufacturer should be submitted at the time bid submission. BIS Safety test report as per IS10322 from 3rd party NABL lab should be submitted at the time bid submission. BIS Certificate with manufacturer same as brand and manufacturer address of indian origin should be submitted at the time bid submission. Minimum Light fixture Lumen output is 2400Lumens. OEM Authorization to contractor should be submitted. Sample Should be submitted for concerned engineer incharge for approval of light fixture. complete all as specified and as directed. Make: NERI/ GVA lighting/ Lumen Plus.

S& F In replacement S& F In repair ARCHITECTURAL POST TOP POLE, 3 metre (as sample approved by Engg-in-charge) 3 metre height with arrangement of two no Iron ring for hanging flower pot on opposite side complete. Pole made of complete cast iron decorative components, where the internal fabricated pole, Made in combination of hot dip galvanised mild steel pipe sections 89mm dia, 48mm dia & covered in the outside by decorative cast iron base and columns. Decorative Cast iron Base design with the company/brand logo engraved in the cast iron mould, starting with dia 260mm for 130mm height, followed by a ring of 260 dia gradually tapering to a flat round surface of dia 170mm for 366mm height again followed by a ring dia 210 mm and gradual tapering up to a dia 92mm as approved by the Engr-in-Charge. Total height of decorative cast iron base shall be 700mm and weight shall be 32 Kgs. Decorative cast iron base shall be provided with a flush door of length 228mm, width 124mm and height 30mm. Decorative cast iron flower starting with a dia 102 mm increasing gradually to 160mm and then tapering to a dia 99mm.Total height of cast iron flower is 304 mm & weight shall be 6.3 Kgs. Decorative cast iron column (2 Nos.) shall be of 80mm dia and having continuous grooves of 5mm depth along the height. The height of each pillar shall be 750mm & weight of each pillar shall be 9.5 Kgs. Decorative Cast iron top starting with dia 80mm and a ring of dia 96mm at height of 160mm then gradually increasing to dia 120mm the top half of the decorative top shall have grooves of depth 5mm, total height of cast iron top shall be 334mm, weight shall be 5.2 Kgs. + 5% tolerance shall only be allowed in weight of all cast iron parts mentioned here in before. Make : NERI/ GVA Lighting/ Lumen Pluse.

S& F In repair ARCHITECTURAL POST TOP Lantern, upper square frame in single piece shall be made of die cast aluminium using pressure die-casting process, with a decorative element which shall also made of die cast aluminium using pressure die-casting process, fixed on the top. Auxiliary and optical compartment should be accessed by tilting the top frame. Bottom frame with Company /brand name engraved in the mould, in single piece, made out of die cast aluminium using pressure die-casting process with a four-armed bracket with flange, which shall also made of die cast aluminium using pressure die-casting process, fixed at the bottom. Frosted Screen made of polymethylmethacrylate (PMMA) moulded in a single piece using Injection moulding process. Screen's Impact resistance: IK06. Pure polyester powder coating in Standard Grey Colour. IP Rating - IP 66. Height – 605mm, Length - 325mm, Width - 325mm,Weight - 6Kg, Area Exposed to Wind(S) - 0.15 Sqm, Power LED's Module (with CREE-XPG2 LED's - Individual LED's Minimum Luminous Flux (lm) is 130lm @ 350 mA (@ 85 °C) same shall be supported by LED manufacturer's tech sheet) in compliance with IEC 62031 (Supporting Test Report from UL Authorised Laboratory shall be submitted by the contractor), on Printed Circuit Board with metal core plate. Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection a minimum of 1.5kV (an additional surge protection device of 10kV also provided in-built the fixture). Optics with refractive lens in PC (Polycarbonate), UV Resistant & Shock Resistance-IK10.LM80 Reported LED Lifetime shall be L90@ 50,000hours minimum & Estimated LED Lifetime shall be L80 @ 100,000 hours(Ta-25°C) minimum. LM 80 report & TM 21 calculation shall be submitted by the contractor to support the same. The Light fixture shall be in compliance with IEC 60598-2-3; IEC 60598-1.(Supporting Test Report from UL Authorised Laboratory shall be submitted by the contractor) .LM79 report shall be submitted by the contractor from UL Authorised Laboratory complete all as specified and as directed. Make : NERI/ GVA Lighting/ Lumen Pluse.

S& F In repair ARCHITECTURAL POST TOP Lantern, upper square frame in single piece shall be made of die cast aluminium using pressure die-casting process, with a decorative element which shall also made of die cast aluminium using pressure die-casting process, fixed on the top. Auxiliary and optical compartment should be accessed by tilting the top frame. Bottom frame with Company /brand name engraved in the mould, in single piece, made out of die cast aluminium using pressure die-casting process with a four-armed bracket with flange, which shall also made of die cast aluminium using pressure die-casting process, fixed at the bottom. Frosted Screen made of polymethylmethacrylate (PMMA) moulded in a single piece using Injection moulding process. Screen's Impact resistance: IK06. Pure polyester powder coating in Standard Grey Colour. IP Rating - IP 66. Height – 605mm, Length - 325mm, Width - 325mm,Weight - 6Kg, Area Exposed to Wind(S) - 0.15 Sqm, Power LED's Module (with CREE-XPG2 LED's - Individual LED's Minimum Luminous Flux (lm) is 130lm @ 350 mA (@ 85 °C) same shall be supported by LED manufacturer's tech sheet) in compliance with IEC 62031 (Supporting Test Report from UL Authorised Laboratory shall be submitted by the contractor), on Printed Circuit Board with metal core plate. Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection a minimum of 1.5kV (an additional surge protection device of 10kV also provided in-built the fixture). Optics with refractive lens in PC (Polycarbonate), UV Resistant & Shock Resistance-IK10.LM80 Reported LED Lifetime shall be L90@ 50,000hours minimum & Estimated LED Lifetime shall be L80 @ 100,000 hours(Ta-25°C) minimum. LM 80 report & TM 21 calculation shall be submitted by the contractor to support the same. The Light fixture shall be in compliance with IEC 60598-2-3; IEC 60598-1.(Supporting Test Report from UL Authorised Laboratory shall be submitted by the contractor) .LM79 report shall be submitted by the contractor from UL Authorised Laboratory complete all as specified and as directed. Make : NERI/ Orient as per site requirement.

aggarwal engineers contractors (BID ID -3489709)