Providing installation Testing and commissioning of 51LPMx140M Dynamic Head Submersible Pumping Unit along with suitable Motor control panel and other allied jobs for Harnessing of the 125mm dia Bore Well No at Zeeshat Mata Temple premises Zeethyar

Amount

Dismantling of the Hand Pump Assembly & the Column pipes along with extraction of the 32mm Dia. GI Column pipes by using the skilled person & labour along with arrangement of all tools & & tackles. The job also involves providing of the Departmental Tripod Stand & CP Block.

Providing, installation, testing and commissioning of submersible pumping unit of below mentioned parameters conforming to IS-8034 of 2002 to be lowered inside bore well casing having inside diameter of 5” inches. Pump: Type: Submersible Speed: 2780 RPM Discharge: 51LPM. Dynamic Head: 141 M. MOTOR /PRIME MOVER: Type: Submersible Speed: 2780 RPM Phases: 1 - Phase AC supply 50+3% Hz Make: Conforming to IS 8034 Capacity; (As recommended by Pump manufacturer Preferably not Below less than 4 HP) Submersible motor should be water filled, water lubricated having capacity for above pumping parameters and working on 1 phase; AC supply ranging from 220V (+_10%) 50+3% HZ. The job includes providing and fitting of appropriate size 38mm GI nipple 6” Inches long threaded on one end and socketed to GI reducer 38mm/32mm at other end. The job includes installation, proper testing and commissioning of pumping unit on full load at site. b) Providing, fitting/installation & testing, commissioning of the 4.0HP single phase submersible pump controller/ control panel at site. c) Providing/Fitting of 63Amp (1No Each) MCB.

P/Fitting of the Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motor 1100 Volt, conforming to IS 694

Providing/Fitting of the 32mm Nominal Dia. “C” Class Galvanized Iron G I Socketed Pipes of 10’ feet length each conforming to IS-3589 to be used as column pipe & the delivery line from Tube Well Top up to the delivery end to connect with the 50mm dia. GI Rising Main land near the Temple Gate. The job includes cutting the pipe in 10” length jobs & threading the either end for accommodating/fitting the assorted size heavy duty sockets.

Providing/Fitting of the 8mm Dia. & G I wire to be used for connecting the submersible pumping unit & the column pipes lowered inside the Bore Well with the MS clamps fitted at the well top.

Providing/fitting of the fittings as 32mm Dia. GM Gate Valve: 1 No 32mm Dia. GM Ball Valve: 1 No 32mm Dia. GI tea: 1 No 32mm dia. GI Bend: 4No 32mm Dia. Union: 2No 2”x11/4” Reducer: 1 No 32mm Dia. 6” long Nipple: 2 No 32mm Dia. 3” long Nipple: 2 No 50mm Dia. 6” long Nipple: 2 No 11/4” x11/4” MS Heavy Duty Clamp: 2No

Design, Providing, Fitting, Installation, testing & commissioning of the air-cooled single phase 7.5kVA Servo Voltage stabilizer of below mentioned specifications conforming to IS-9815 Standard; Capacity: 7.5KVA Type: Air Cooled, Dry Type Control Type: Micro Controller Phase: single Phase Input voltage: 90V to 240V Output Voltage: 220V to 270V±1% Frequency: 50Hz Max. Spike Current: 20-40V per second

Competent Engineering Works

M/S UMER ENTERPRISES