Supply and Fixing of Open Gym Various Placese at Municipal Board Jhalrapatan

Amount

H-Shedule

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make Air Walker- DIMENSIONS: - 1060mm (Length) x 810mm (Width) x 1600mm. (Height). SAFE AREA:- 2.0 Meter x 1.8 Meter Air Walker Equipment made from “B” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G.I. Pipe will be of Apollo, Tata, Jindal, Swastik, Zenith or Siddharth. The main frame pipe is of 80mm NB made from “B” Class G.I. Material which is bending at the radius of 250mm. The Sleeve frame is of 100 OD and M.S. Seamless Pipe with thickness 5mm. This sleeve can be easily disassembled from main frame. The bottom support of M.S. round plate of 0250mm & 10mm thick. The leg movement frame is of 32NB made from “B” Class G.I. pipe. This link is supported with MS flat of size 60X8mm. The handle frame is of 25NB made from “B” Class G.I. Pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class welded with M.S. round plate of 0250mm & 10mm thickness and 20mm x 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes. Foundation cover Closing Cap is made from FRP Material with 0.7mm thickness. Closing Caps are made up of high quality reinforced Plastic material. A24 circlips are used for assembly. The bearings used are “6205zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel galvanized nuts & bolts are used for assembly. The powder coating is done by Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness. The footrests are made from casted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. To build structure bushes are used which are made from M.S. made of SS 304 used on nylon cap mounted on pins to protect and pins from rain and dust.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make TRIPLE STANDING TWISTER – DIMENSIONS: - 1150mm (Length) x 1150mm (Width) x 1580mm (Height). SAFE AREA: - 02.1Mtr. Triple Twister made from “B” Class G.I. Galvanized (G.I.) Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tata, Jindal, Swastik, Zenith or Siddharth. The Center Pipe is of 80NB made from “B” Class G.I. pipe. The bottom support welded is of M.S. round plate of 0250mm & 10mm thick. The standing frame is of 32NB made from “B” Class G.I. pipe. The handle frame of triple twister is of 25mm NB made from “B” class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB “B” class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm x 25 mm M.S. angle of 3mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. The standing plate is fitted on the frame made up of 0 80 NB GI. Pipe. M.S. Round Plate of size 0300mm x 10mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The Pins used are made up of 0 35 mm SAE 8620 bright material. The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make CYCLE NEW MODEL- Area - 1.8 x 0.8 mtr. Safe Area – 2.8 x 1.8 mtr. Height – 1.10 mtr. Providing & fixing of Cycle having its required Area (6’0” x 2’6”) and height of 3’6” Feet. The wheel of cycle should be made by 2” x 2” square pipe with wheel support of 2 nos. half round plate of thickness. The Handle & Centre support should be made by 1’6” x 1’6” Square pipe & handle should be made by 25mm ‘B’ class pipe for balancing the cycle. The seating arrangement should be supported by 5mm thick plate & the FRP seat of size (13” x 13”) to seat properly on the cycle. The mechanism of the paddle consist of 2 nos. 6305 heavy duty bearing of reputed make with shaft, solid bar & bush for smooth operation of the cycle.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make LEG PRESS DOUBLE - *DIMENSIONS: -1840mm (Length) x 360mm (Width) x 1560mm. (Height). *SAFE AREA: - 2.8Mtr x 1.4Mtr. *Leg press equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. *Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. *The center pipe is of 100mm NB made from “B” Class G.I. pipe. *The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame. *The bottom support of M.S. round plate of 0250mm & 10mm thick. *The remaining outer frame is of 32NB made from “B” Class G.I. pipe. *The foundation used for fixing is structure and made from center pipe of G.I. of 80mm NB “B” Class welded with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. *Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. *The footrests are made from casted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate. *The frame of footrests made up of 25NB “B” Class G.I. pipe. * Closing Caps are made up of high quality Fiber reinforced Plastic material. *To build structure bushes are used which are made from M.S. seamless pipe of 50mm O.D. and 5mm thickness. *The pins used are made up of 025mm SAE 8620 bright material. *The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed Brand (SKF/FAG). *High tensile steel with galvanized nut bolts are used for assembly. *The circlips used for assembly are of A24mm. *The powder coating done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make KNEE CHAIR :- *DIMENSION: - 750 mm (Length) x 600 mm (Width) x 600 mm. (seating Height). *SAFE AREA: - 1.2 Mtr x 1Mtr. *Knee chair equipment made from “B” Class G.I. pipe of Different IDGI. IDGI stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. *The center Pipe is of 100mm IDGI made from “B” Class G.I. Round Pipe. *The M.S. round plate is of 0250mm & 10mm thickness is welded at bottom. *Handle and Bottom sleeve pipe of 25 mm id *The back frame of the Seating & back rest is of 50 IDGI. *The handle frame of seating rest & Foot movement must be 25 mm IDGI. *Bearing should be 6302 reputed make only. *Closing Caps are made up of high quality Fiber reinforced Plastic material/ MS round cape. *The Pins used are made up of 0 35 mm SAE 8620 bright material. Suitable rubbers griping for handle and foot stand. *High tensile steel with galvanized nuts & bolts are used for assembly. *The powder coating is done by Pure Polyester powder of Berger Paint with 60 to 70 micron thickness.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make Cross Trainer - DIMENSIONS: - 1320mm (Length) x 600mm (Width) x 1750mm. (Height). SAFE AREA: - 1.7 x 1.2Mtr. Cross trainer equipment made from “B” Class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of GI Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. The main frames Pipe are of 80NB “B” Class G.I. Pipe with single bend pipe with 250mm radius. The bottom support of M.S. round plate of 0250mm & 10mm thick. The Handle Frame used for fixing is a structure and made from center pipe of G.I. of 80NB “B” class welded with M.S. round plate or 0250mm & 10mm thick. Main pipe supported with 25 mm x 25 mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. To build structure bushes are used which are made from Z.S. seamless pipe of 60mm OD. With 5mm thickness. The footrests are made from Aluminum casing material of size 130mm X 310mm X 5mm thickness and mounted on M.S. Plate of Size 130mm x 310mm x 3mm thick. Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 35mm, 25mm, and 17mm are made up from SAE 8620 bright. The Bearings used are of “6007zz” and “6203zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nuts and bolts are used for assembly. The powder coating is done with Pure Polyester of Ackzonoble or Berger Paints with 60 to 70 Micron assembly. A16, A 24 mm circlips are used for assembly. Bolt M8x16 mm and NY lock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make ABS Board - Product Area: - 1.6 X 0.8 mtr. Safe Play Area: - 2.6 X 1.8 mtr. The main frame of ABS BOARD is made up of 80 NB G.I. pipes with leg support structure. The back rest is fixed over 40 NB back rest frame. Back rest is made up of rectangular pipes of 50 X 25 X 3 mm thick. All pipes are uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe closed by GI/HDPE caps for user safety against entrapment. The powder coating done with Pure Polyester powders of Ackzonoble or Berger with 60 to 70 micron thickness. All the sharp edges and corner properly grinded to give smooth finishing.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make Pommel Horse - DIMESIONS: - 2150mm (Length) x 800mm (Width) x 800mm. (Height). SAFE ARAE: - 5Mtr x 3.5Mtr. Pommel horse equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of GI Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. The main frame of 80 NB and 50NB made from “B” Class G.I. pipe. The handle frame is of 32NB made from “B” Class G.I. pipe. 40mm x 40mm CRC square pipes frame is placed on the 25mm x 25mm x 3mm M.S. L Angle with 60 x 10 m thickness flat is used for support. Closing Caps are made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts are used for assembly. The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make Seating And Standing Twister - DIMENSION: - 1700mm (Length) x 540mm (Width) x 1250mm. (Height). SAFE AREA: - 3Mtr x 1Mtr. Seating & Standing Twister equipment made from “B”Class G.I. pipe of Different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Apollo, Tata, Jindal, Swastik, Zenith or Siddharth. The center Pipe is of 80mm NB made from “B”Class G.I. Round Pipe. The M.S. round plate is of 0250mm & 10mm thickness is welded at bottom. Handle and Bottom sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance. The bottom frame of the Seating & Standing twister is of 32NB, 50 NB, and 25 NB made from “B”Class G.I. pipe. The handle frame of seating & Standing twister is 25 NB & Foot resting frame of seating side is made from “B”Class G.I. pipe of 25mm NB. The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB “B”Class. Welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25mm x 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRCA Square pipes of 3mm thickness. The Twister plate fitted on the bottom frame is made up of M.S. round Plate of Size 300mm diameter and 10mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The Pins used are made up of 0 35 mm SAE 8620 bright material. The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating is done by Pure Polyester powder of Berger Paint with 60 to 70 micron thickness.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make Surf Board Single - DIMENSIONS: - 910mm (Length) x 860mm (Width) x 1400mm. (Height). Safe Area: - 1.39Mtr x 1.27Mtr. Surf Board Equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. The center pipe is of 100mm NB made from “B” class G.I. pipe. The sleeve pipe is of 125mm OD seamless pipe with thickness of 5mm and bolted to main frame with M10 SS bolts. The bottom support welded of M.S. plate of 0250mm & 10mm thickness. The handle frame is of 25NB made from “B” class G.I. pipe. The paddle frame is of 25NB made from “B” Class G.I. pipe is supported with 70x8mm bend M.S. flat and can be replaceable. The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB “B” class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25mm x 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Bushes are used 70mm Outer Diameter with 5mm thickness is used. The footrests made from Aluminum casting material of size 320mm x 270mm x 5mm. For support to footrest 200mm x 250mm with 3mm thickness M.S. Plate used. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of 035mm SAE8620 bright material. The bearing used are of “6007zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nut bolts are used for assembly. The circlips used for assemble A24. The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make Single Chest Press– DIMENSIONS: - 9000mm (Length) x 710mm (Width) x 2200mm. (Height). SAFE AREA: - 2.0Mtr x 1.7Mtr. Chest press equipment made up of “B” Class G.I. pipe of different NB.NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. The center pipe is of 100NB made up of “B” Class G.I. pipe. The bottom welded with support of M.S. round plate of 0250mm & 10mm thickness. The connecting pipes are made up from 25NB “B” Class G.I. pipe. The handle frame is made up from 32NB “B” Class G.I. pipe. To build structure bushes are used which are made from M.S. seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” Class Welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Foundation cover Closing Cap is made from FRP Material with 0.7mm thickness. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mm X 2 mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nuts & bolts are used for assembly. The circlips used for locking is made up of A24 mm & A16mm. The powder coating done with Pure Polyester powder from Ackzonoble or Berger Paints with 60 to 70 micron thickness.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make Multifunctional Trainer - DIMENSIONS: - 1900mm (Length) x 600mm (Width) x2200mm (Height). SAFE AREA: - 3Mtr. X 1.6Mtr. Multifunctional Trainer equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. The main frame is 100NB made from “B” Class G.I. pipe. M.S. round plated of 0250mm & 10mm thick are welded at bottom. The handle frame is of 40mm x 80mm made from square pipe. The bottom support of handle is made from 80mm x 40mm x 3mm thickness square CRC pipe. The foundation used for fixing is structure and made from center pipe of G.I. of 80mm NB “B” class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angle of 3mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating is done with Pure Polyester powder of Ackzonoble or Berger Paints with 60 to 70 micron thickness.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make Double Seated Pullar - DIMESIONS: - 1900mm (Length) x 740mm (Width) x 1920mm (Height). SAFE AERA: - 1.2Mtr x 3Mtr. Seated puller equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. The center pipe is of 100NB made from “B” Class G.I. pipe. Bottom support is of M.s. round plate of 0250mm & 10mm thickness is welded. All linkages are made up of 25NB “B” Class G.I. pipe. The handle frame is of 32NB “B” Class G.I. pipe. The seat frame is of 32NB “B” class G.I. pipe. To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB “B” class. Welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Foundation cover Closing Cap is made from FRP Material. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mm X 300mm X 2mm thickness and form radius of 20 mm with no sharp edges. Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. The bearings used are of “6205zz” and “6203zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile steel with galvanized nuts & bolts are used for assembly. The circlips used of assembly are of A16. The powder coating done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make Thi-Chi Spinner (2 Wheel) – DIMENSIONS: - 700mm (Length) x 1000mm (Width) x 1280mm (Height). Safe Area: - 1.9Mtr x 1.9Mtr. Thai chi spinner Equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. Make of G I Pipe will be of Tate, Apollo, Jindal, Swastik, Zenith or Siddharth. The center pipe is of 100NB made up of “B” Class G.I. pipe. The handle movement round frame is made up from 25NB “B” class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25mm x 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of 025mm of SAF 8620 bright material. The bearing used is “6201zz” permanent lubricated sealed bearing of reputed brand (SKF/FAG). High tensile S.S. nut bolts are used for assembly. Foundation cover Closing Cap is made from FRP Material with 0.7 mm thickness. The circlips used for assemble is of A24 and A11. The nylon bush is used for handle knob. The powder coating done with pure Polyester from Ackzonoble or Berger Paints with 60 to 70 micron thickness. Bolts M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make Parallel Bar DIMENSIONS:-1500 mm (Length) x 600 mm (Width) x 1500 mm. (Height). SAFEAREA: - 1.6 Mtr x 2.5Mtr. . Parallel Bar equipment made from “B” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. The main frame made from 50 NB “B” Class G.I. pipe. The handle frame is of 32NB made from “B” Class G.I. pipe. The foundation used for fixing is25mmx25mmx3mmthickness L Angle. Closing Caps are made up of high quality Fiber reinforced Plastic material. The powder coating done with Polyester powders from Ackzonoble or Berger P aints with 60 to70 micron thickness.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make 8 in Combination Set – PRODUCT DIMNSIONS: - D.I.A 4000mm SAFE WORKOUT AREA: - D.I.A. 5000mm Combination made from “B” Class G.I. pipe. The octagonal structure is made up of 100mm NB “B” class GI pipe. Round plate of 250mm diameter & 10mm thickness is welded at bottom of octagonal Structure. The links are made up of 25mm NB “B” class G.I. pipe. The handle and seat frame of seated puller is made from 32mm NB “B” class G.I. pipe. For the assembly different bushes are used which is made from seamless pipe of 50mm OD and 5mm thickness & 5mm solid bar is used. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330mm x 300mm x 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20mm with no sharp edges. Leg press footrest consists of 25 NB diameter hardened low carbon steel material. The nut Bolts used for assembly are made from S.S. material. The bushes (stopper) used to avoid the collusion made from Poly Urethin Plastic material of 50mm diameter. Surfing frame is of 32NB made from “B” Class G.I. pipe. 300mm diameter x 10mm thick plate can be used for rotating sear of seating twister with 50 NB vertical G.I. pipe. Closing caps made from high quality FRP material which is of 2mm thickness. The pints used are made up of 17mm diameter solid bar. The bearing used are of “6205” permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from M.S. pre-galvanized material. A17, A24, A34 circlips are used for assembly. The footrests are made from casted Aluminum material. Having sizes 130mm x 310mm x 5mm thick. With the support of 310mm x 130mm x 3mm thick MS plate. It has Bolting provision for mounting on concrete slab.

Providing and installation of Uday Creations kilkari, Arihant Playtime, Svr, Arasu make 16 in one AREA : 21’ x 20’ feet Total Height : 10 Feet. Vertical Pole : 100mm ID Horizontal Pole : 40mm ID Loops : 20mm ID Curve / Bending Loop: 25mm ID 1) Chest Press : Area : 3*3 Feet Pipe : 40 mm OD / 32mm OD Square Pipe : 40 * 40mm 2) Sholder Shaper : Area : 3*3 Feet Pipe : 40 mm OD / 32mm OD Square Pipe : 40 * 40mm 3) Leg Press : Area : 3.25 *1. 5 Feet Pipe : 48 mm OD / 32mm OD Rectangle Pipe : 2” X 1” ( 50* 25 mm ) 4) Sit Up Board : Area : 4 *2 Feet Pipe : 60 mm OD / 32mm OD / 25mm OD Sheet : FRP Material. 5) Pull Up Bar : Area : 3 * 2.5 Feet Pipe : 40 mm OD / 32mm OD 6) Hip Twister : Area : 2 * 2 Feet Pipe : 75mm OD / 40 mm OD / 32mm OD /25mm OD 7) Flying Pull Up Bar : Area : 6 * 3 Feet Pipe : 32mm OD / 25mm OD 8) Pull Up Station : Area : 3 * 5 Feet Pipe : 32mm OD / 25mm OD 9) Vertical Ladder : Area : 5 * 4 Feet Pipe : 32mm OD / 25mm OD 10) Horizontal Ladder : Area : 10 * 1.5 Feet Pipe : 48mm OD / 32mm OD 11) Static Monkey Bar : Area : 10 * 1 Feet Pipe : 48mm OD / 25mm OD 12) Ninja Ring : Area : 1 * 6” Feet Pipe : 25mm OD 13) Step Up : Area : 2 * 1.5 Feet Pipe : 32mm OD 14) Leg Lift : Area : 3.25 *2 Feet Pipe : 60mm / 40mm / 32mm OD 15) Dorsal Rose Station : Area : 6 *2 Feet Pipe : 48mm / 25mm OD 16) Multi User Frame : Area : 6 *10 Feet Pipe : 48mm OD

RIDHI SIDHI CONTRACTOR AND SUPPLIERS