SPL REPAIR TO BLDG NO T-73 T-78 AND T-80 AT 223 COY ASC (SUP) AND SPL REPAIR TO BLDG NO T-30 P-13 AND P-5B OF GE 862 EWS UNDER AGE BR DETT-III OF GE 862 EWS

Sch 'A' Part-I (B/R Works) Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm the (below or above ground level), complete all as specified and directed.

M&L for 75mm thick PCC type B-1,1:2:4 (using 20mm graded stone aggregate) as in flooring/ hard paving/ sub base, complete all as specified and directed.

M& L for providing kota stone slab flooring 18-20 mm thick over and including 20 mm thick screed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment including cutting, complete all as specified and directed.

M& L for providing Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over and including 15mm thick screed bed in CM (1:4) and jointed with grey cement slurry mixed with pigment including cutting, complete all as specified and directed.

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints hacking for key to any thickness scrubbing down with water etc, complete all as specified and directed.

M&L for 20 mm thick rendering in cement mortar (1:6) in two coats (each layer 10mm thick) on new fair faces of brick/ concrete surfaces of walls, finished even & smooth without using extra cement, complete all as specified and directed.

M&L for 20 mm thick rendering in cement mortar (1:4) in two coats (each layer 10mm thick) on new fair faces of stone wall/ concrete surfaces of walls, finished even & smooth without using extra cement with using water proofing compound in second layer, complete all as specified and directed. Note- Water Proofing Compound measured separately.

Supply only liquid water proofing compound conforming to IS, complete all as specified and directed.

M&L for preparation of New plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment from old plastered surface of walls and applying two coats of oil bound distemper over a coat of primer and 1mm thick wall care putty to make smooth surface of wall, complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of cement base paint on walls, complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali primer on walls, complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for providing and injecting post anti termite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors, complete all as specified and directed. Note: The treatment work shall be carried outthrough authorised agencey only.

M&L for Cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) 75 mm thick as in plinth protection laid in slope 1:12 from outer edge of the wall finished even and fair ,laid in alternate bays including providing 6 mm wide joints through out the thickness of plinth protection in concrete bays and in between walling and plinth protection,joint filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed.

M&L for minimum 80 mm thick precast PCC interlocking blocks of grade M-35 single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine confirming to IS-15658 : 2006 in equal proportion of grey and coloured tile to make a pattern as directed, laid over and including 20-25mm thick sand cusion including demolition of old tiles, complete all as specified and directed.

S&F Factory made MS tubular Box type window of MS rolled steel section conforming to IS-1038 and shall be ISI marked manufactured by ISI approved manufacturer, openable frames shall be fabricated of sections as approved by Engr-in-Charge corner welded to form a solid fused welded joint handles shall be of z section welded with openable frame box steel section(Consisting of both shutter glazed shutter and gauge shutter complete) used in outer frame shutter frame and central frame shall be ERW section of 16 gauge with fixing lugs to be fixed as per provision of IS-1038 except that top lugs shall not be provided , all shutters of windows shall be provided with 4 Nos friction free hinges, 2 Nos 75 mm tower bolts to each leaf of window one at top and one at bottom welded on 3 mm thick steel sheet piece of suitable size which shall be in turn welded to z section f steel window to provide suitable arrangement of using tower bolt and 1 nos bow handle in each shutter. Glazed shutter and , gauged shutter of window , mild steel casement stays 300 mm with hinged joint and two plates with studs complete all as specified with all fittings and fixtures without glazing bars, 3mm sheet glass in glazed shutter and , GI wire mesh,of 0.56 nominal dia and average width of aperature 1.18 mm in gauged shutter, etc, complete all as specified and directed.

M&L for providing & fixing of 4mm thick designer ceiling board (Make : Everest/Ramco/Everest) in ceiling fixed with screw as per manufactures instructions, laid on hot dipped galvanized iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick galvanized steel sheet & of size 24x32x300mm and spaced at 12mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 3 mm dia to be fixed by approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200 long cross tee with (double stitching) to be inter locked between main runners at 600mm centre to from 1200x600mm modules cross tee longer than 600mm modules to be formed by fitting 600mm long cross tee, tee perimeter wall angle shall be of 0.45mm thick galvanized steel of size 19x19mm and 300mm long of white colour all as per instruction, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings sheets in roof, complete all as specified and directed.

S&F of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall and curved roof surfaces fixed with self tapping screws, complete all as specified and directed.

S&F of Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge fixed with self tapping screws, complete all as specified and directed.

M & L for preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M & L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for Cement concrete in foundations, filling and mass concrete in 1:3:6 type C2, using 40mm graded stone aggregate, complete all as specified and directed.

M&L for Cement concrete type C-2, (1:3:6) (using 40mm graded stone aggregate) as in surface channels and drains, complete all as specified and directed.

Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped end, etc, complete all as specified and directed.

M & L for PCC 1:2:4, Type B-1,(using 20mm graded stone aggregate) as in coping, benching, complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, for portions ordered to be dismantled , built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for Walling of Random rubble uncoursed well bonded, bedded and solidly hearted built CM 1:6, complete all as specified and directed.

All as per Item No 29.00 here-in-before but except stone.

Taking down chowkhat with shutter (without taking off shutter from the frame) n. exc 1.5 sqm complete all as spd and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sqm each, complete all as specified and directed.

S & F Framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc., complete, by using Fe 410-W (Gde E-250) quality a drilled for mixing of steel sheetion or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (including 1.6 mm th MS plain back steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing, complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F Rolled mild steel (Fe-290 Gde E-165) for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.

S&F Rolled mild steel (Fe-290 Gde E-165) for Compound girders and Stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M & L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in CM (1:4), complete all as specified and directed.

M & L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in CM (1:4), complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10mm thick screed bed CM (1:4), complete all as specified and directed.

Material and labour for glazed ceramic tiles of size 450 mm x 350 mm x 7mm thick coloured on vertical surfaces set, jointed and pointed in net cement slurry and pointed in white cement mixed with colour pigments to match the existing surface over & including 10mm thick rendering in CM (1:4), complete all as specified and directed.

M&L for granite work 18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed in Cement mortar 1:3. including demolition of old granite slab, complete all as specified and directed.

Dismantling of water tank of capacity 500 to 1000 ltr, complete all as specified and directed.

S&F 20 mm Ball brass valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

M&L for Rotational moulded polyethlene water storage tank 500 litres capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part I, complete all as specified and directed.

S&F Anodised aluminium frame for doors, window,ventilators with one or more rebates including joining cleats, complete all as specified and directed.

S&F poweder coted Anodised aluminium window and ventilator shutters, fixed /sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed.

S&F poweder coted Anodised aluminium door shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,rubber neoprene packing,2 n0 handle in each door,hinges anodised aluminium snap beading, screws, complete all as specified and directed.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and peration of handles and fixing approved anodised aluminium standard section around the pening, complete all as specified and directed.

M & L for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications, complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square Exc 0.50 sqm in each pane, complete all as specified and directed.

S & F Aluminium body door closer hydraulically regulated, universal type suitable for door shutters upto 1M width of approved make etc complete all as specified and directed.

Supply only 5.5mm thick plain sheet glass, complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F of 125 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.

S & F of 200 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy, complete all as specified and directed.

S & F 100 mm long extruded B-22, aluminium alloy Butt hinges, complete all as specified and directed.

S & F 75 mm long extruded C-21, aluminium alloy Butt hinges, complete all as specified and directed.

S &F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

M&L for making good jambs to openings (to foregoing item ) including cutting, toothing and properly bonding into old work also facing, jointing and pointing to match existing work in cement mortar 1:4, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

S&F cupboard shutter 20mm thick(style) factory made panel PVC incl chowkats frame made out of MS tube 19 gauge for top and bottom rails MS frame shall be covered with heated moulded plain colour PVC channel having a PVC sheet strip of 10 mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail ,lock rail and b on either side 10mm(5mmx2) thick of 20mm and 20mm cross PVC sheet and as gap insert for top and bottm rail. Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supply and fixing in the frame at site as per specification, complete all as specified and directed.

S&F of 20mm thick PVC solid core construction with PVC solid core and designer face as in shelves, complete all as specified and directed.

S&F 40 mm dia, cupboard knobs fix with nut,screw and washer of brass,polished, complete all as specified and directed.

S&F 100 mm long Hasp and staple, brass with mild steel, wire type, stove enamelled black,safety type including bolt to hinge plate and fixed with screws, complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwises pecifically provided for, complete all as specified and directed.

M&L for 25mm thick cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) as in levelling course, complete all as specified and directed.

M & L for Rendering 15mm thick on fair faces of brick/stone work or concrete surface in CM (1:3) with WPC , finished even and smooth using extra cement, complete all as specified and directed.

M&L for APP based polymeric membrane minimumweighing 3kg/sqm and minimum 3mm thickreinforced with polyster non wove fabric (wt. notless than 150 gms/sqm) land on primed surfaceby forced application complete all as specified.APP based polymeric membrane minimumweighing 3kg/sqm and minimum 3mm thickreinforced with polyster non wove fabric (wt. notless than 150 gms/sqm) land on primed surfaceby forced application, complete all as specified and directed.

M&L for applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of1.2 kg per sq.m including cleaning of surfaces, complete all as specified and directed.

Cutting chases,pinning in, making good to facing on brick wall where required and pointing in CM 1:3 to end or edges of landings,steps,cill,shelves,lintel etc and cutting chases for concealed water tubing or concealed conduite wiring etc and making good ,cutting not exc 10 cm but not exc 20 cm girth, complete all as specified and directed.

S&F 50mm bore GI pipe light grade as in spout, complete all as specified and directed.

M&L for 100mm thick Cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in flooring even & smoth without using extra cement, complete all as specified and directed.

M & L for Rendering 10mm thick on fair faces of brick/stone work or concrete surface in CM (1:6)as in wall, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for Rendering 15mm thick on fair faces of brick/stone work or concrete surface in CM (1:4)as in wall with WPC , finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying Acrylic Smooth exterior paint of required shade : New work (Two or morecoat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over a 1mm thick wall putty, complete all as specified and directed.

Complete removal of existing treatment of wall and applying Acrylic Smooth exterior paint of required shade : New work (Two or morecoat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over a coat of wall putty, complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm bore, complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm bore, complete all as specified and directed.

M & L for steel water Tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 15 mm bore, complete all as specified and directed.

M & L for steel water Tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 20 mm bore, complete all as specified and directed.

S & F in repairs Sheet front glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repairs for Gun-metal, globe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed 20 mm dia complete all as specified and directed.

S & F in repairs PTMT 32mm dia waste coupling (half or full threaded), minimum weight 60 gms) fixed to stainless steel sinks/WHB complete all as specified and directed.

S & F in repairs brass chromium plated tubular towel rail 20mm dia 600mm long with and including one pair of brass chromium plated brackek complete all as specified.

S & F in repairs for 125mm dia PTMT grating doom with waste hole for waste pipe ( minimum weight 40 gram), complete all as specified and directed.

S & F in repair for PVC connection pipe 15mm dia with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repair Vitreous China urinals, flat back size 465x355x265 mm (back or corner wall type),complete including providing and fixing plugs, bedding urinalagainst wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.

S & F in repairs Vitreous China Wash hand basin white, flat back, size 630x450mm size including cutting for and pinning ends of brackets or erecting stand, complete all as specified and directed.

Supply and fixing counter sunk oval shape viterous China wash basin, white , size 560x410mm fixed to granited plateform including cutting of granite in oval shape, including all accessaries but excluding taps, complete all as specified and directed.

S & F in repairs 32 mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all, complete all as specified and directed.

S & F in repairs 32mm dia waste coupling, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, complete all as specified and directed.

S & F in repair for sink made out of stainless steel 0.80mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

M & L for Salt glazed stoneware drain pipes 150mm bore laid in trenches and jointed, complete all as specified and directed.

M & L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) for 150mm bore pipe, complete all as specified and directed.

Demolition and breaking up drain pipes 150mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and as directed

S&F in repair Stop Valves 15mm Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends, complete all as specified and directed.

S&F in repair Stop Valves 20mm cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends, complete all as specified and directed.

S&F in repair Bib Taps 15 mm bore cast copper alloy Chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipes, complete all as specified and directed.

S&F in repair Bib Taps 15 mm bore cast copper alloy Chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipes, complete all as specified and directed.

S&F Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, screwed down high pressure screwed for iron pipes, complete all as specified and directed.

S&F in Repair Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, screwed down high pressure screwed for iron pipes, complete all as specified and directed.

S&F in Repairs Hot & Cold Mixer Chromium plated Fancy type of 15mm dia for WHB, complete all as specified and directed.

S&F in Repairs plastic water closet seat cover white, closed pattern with flat bottom,and cover &milld steel chromium plated or aluminium hinging device, complete all as specified and directed.

Cutting holes into or through brick / Block walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required not exc. Surface area 150 sqcm, complete all as specified and directed.

S&F in repair Angle cock 15mm Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends, complete all as specified and directed.

Cutting chases,pinning in, making good to facing on brick wall where required and pointing in CM 1:3 to end or edges of landings,steps,cill,shelves,lintel etc and cutting chases for concealed water tubing or concealed conduite wiring etc and making good ,cutting not exc 10 cm girth, complete all as specified and directed.

S&F in repair Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot restsany pattern (excluding flushing cisternand flush pipe), complete all as specified and directed.

S&F in Repair Vitreous China Wash down water closet pan pedastel pattern (EWC)siize 580 mm white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe, complete all as specified and directed.

S&F in Repair PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets, complete all as specified and directed.

M&L 100 mm cast iron floor trap with grating including jointing to waste pipe fixed in CM(1:2:4), complete all as specified and directed.

M&L in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S&F in repair of CP brass wall mixture 2 in 1 for hot and cold water mixting and one for shoer rose of 15 mm dia screwed down for iron pipe, complete all as specified and directed.

S&F in repair brass CP shower rose of size 125mm with swivel joints fixing to steel pipe, complete all as specified and directed.

Sch 'A' Part-II (E/M works) Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be amde as per conditions seperately) and making good the disturbed surface of walls, floor or ceiling etc to match the existing specification, complete all as specified and directed.

M&L for point wiring with two single core 1.5 sqmm (nominal cross section area FRLS PVC insulated unsheathed copper conductor cable and one single core 1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed 1100 Volts, grade multi stranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including medium grade rigid non metalic PVC concealed conduit in wall after cutting chases in wall including cast iron or pressed steel terminal box covered with and including 3mm thick bakelite sheet top cover fixed flush with wall using brass screws, washers and all requisite accessories such as PVC elbow, Tee, collars, bends etc for mounting switches, socket, fan regulators etc for one light/ fan exhaust fan point controlled by one way switch 6 Amp, complete all as specified and directed. Note: The colour coding of wiring to be followed as Red/ Yellow/ Blue Phase/ Neutral/ Earth respectively.

All as per Item No 119.00 here-in-before but for socket outlet 5 Amp on same board.

All as per Item No 119.00 here-in-before but for socket outlet 5 Amp on independent board.

All as per item No 119.00 here-in-before, but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthling lead, complete all as specified and directed.

M&L for switch piano flush type 5 Amps SP one way 230 volts, complete all as specified and directed.

M&L for socket outlet 2 in 1, 5 Amps, 5 Pin, flush type, 230 volts, complete all as specified and directed.

S&F for switch socket combination 2 in 1, 15 Amps, 5 Pin, flush type, 230 volts, complete all as specified and directed.

M&L for point wiring for one light point/ fan point/ exhaust fan point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor two single core multi strand flexible cable and 1.5sqmm PVC insulated FRLS unsheathed copper conductor singel core cable (green colour) as earth lead and including PVC conduit along with modular sunken boxes of required size with modular white cover plate with frame including cutting chaes to wall making good the disturbed surfaces to mathc with the existing specificaiton, complete all as specified and directed. Note: The rates are inclusive of cutting/ chasis in wall & suitable PCC works inclding making good to disturbed surfaces.

All as per Item No 126.00 here-in-before but for socket outlet 5 Amp on same board.

All as per Item No 126.00 here-in-before but for socket outlet 5 Amp on independent board.

All as per Item No 126.00 here-in-before but for one bell point controlled by one push botton.

All as per item No 126.00 here-in-before, but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthling lead, complete all as specified and directed.

All as per item No 126.00 here-in-before, but for one 3 pin 15 Amp socket outlet independent with 4.0 sqmm PVC insulated FRLS multistranded copper cable with 4.0 sqmm single core multistranded FRLS copper cable as earthling lead, complete all as specified and directed.

M&L for modular switch piano, 1 module, 6 Amps SP one way 230 volts, complete all as specified and directed.

M&L for modular switch, single pole, one way 16 Amps 240 volts, complete all as specified and directed.

M&L for modular socket outlet 2 in 1, 6 Amps, 3 Pin, flush type, 230 volts, complete all as specified and directed.

M&L for modular socket outlet 2 in 1, multipurpose, 6/16 Amps, 2 module, 230 volts, complete all as specified and directed.

S&F modular bell push, single pole, one way, 6A, 1 module, 240 volts, complete all as specified and directed.

S&F ding dong bell AC 230 volts, single pole, complete all as specified and directed.

M&L for ceiling rose surface bakelite 3 terminals, PVC/ Polycarbonate, isolated body, complete all as specified and directed.

S&F modular stepped type elctronic fan regulator heavy duty, hum free suitable to control speed of fan from 0 to 100% and connecting electrically, complete all as specified and directed.

S&F 6 Amp Angle holder/ batten holder with metal ring, complete all as specified and directed.

S&F LED lamp 7 watt suitable for lamp holder, complete all as specified and directed.

M&L in replacement for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative box type with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height, complete all as specified and directed.

M&L in replacement for LED light fitting, complete with 1x 16 watts, flame proof, CMRI certified recommended for gas/ vapour group of IIA & IIB, Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connectors etc, complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and directed.

S&F in replacement LED luminaire 600 x 600 mm, 36 watt, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivber, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed.

Supply and fixing LED light fitting 1 x 10 Watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as sepecified and directed.

M&L for exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 250mm sweep having power input 70W speed 1200RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed.

M&L for exhaust fan, made of sturdy engineering plastic complete with louvers shutter, 230V, 50Hz, copper winding of 300mm sweep having speed 1200RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed.

Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as sepecified and directed.

S&F in replacement of sheet metal enclosure MCB DB, SPN 240 volts 8 way with IP-66 IK-09 protection double door 200A complete with appropirate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specificaiton, complete all as specified and directed. Note: MCBs will be measured separately.

S&F in replacement of sheet metal enclosure MCB DB, SPN 240 volts 12 way with IP-66 IK-09 protection double door 200A complete with appropirate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specificaiton, complete all as specified and directed. Note: MCBs will be measured separately.

S&F in replacement of sheet metal enclosure MCB DB, SPN 240 volts 4 way with IP-66 IK-09 protection double door 200A complete with appropirate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specificaiton, complete all as specified and directed. Note: MCBs will be measured separately.

M&L for MCB single pole and neutral 240 volts any rating upto 32 Amps, with rupturing capacity 10 KA,including providing thimble for out going cables, including removing old/unsv, complete all as specified and directed.

S&F for MCB single pole 240 volts any rating upto 5 to 32 Amps, with rupturing capacity 10 KA, 'B' curve in the DB, including providing thimble for out going cables, including removing old/unsv, complete all as specified and directed.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Taking out unserviceable ceiling fan and deposit to MES Store, supply and replacement with ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod and electronic regulator alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable, complete all as specified and directed.

M&L for sheet metal enclosure MCB distribution board, double door TPN with IP-43-IK protection single phase 415 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv, complete all as specified and directed. Note:- MCBs will be measured separately.

S&F for MCB TPN 63 Amp, 415v, 10KA, 'B' curve in the DB, complete with connection, testing and commissioning, complete all as specified and directed.

S&F for MCB single pole 240 volts, 40 Amps, with rupturing capacity 10 KA, 'B' curve in the DB, including providing thimble for out going cables, including removing old/unsv, complete all as specified and directed.

M&L in replacement for submain wiring with two single core PVC insulated FRLS unsheathed, FRLSH flexible copper conductor cable of size 6.0 sqmm and one single core PVC insulated unsheathed, FRLSH flexible copper conductor cable (green color) of size 6 sqmm as earth lead in & including PVC casing caping/ non metallic rigid PVC conduit medium grade and making good the disturbed wall surfaces to match with existing specififcation all as required at site, complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed.

Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified and directed.

Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core confirming to IS 7098 (Part-I): 1988 laid on trenches/ wall/ floor or passing through calbe duct/ trunking and suitable size of lugs, connection with existing LT panels and testing on completion, complete all as specified and directed.

Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core confirming to IS 7098 (Part-I): 1988 laid on trenches/ wall/ floor or passing through calbe duct/ trunking and suitable size of lugs, connection with existing LT panels and testing on completion, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft/ loose soil, complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm, complete all as specified and directed.

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed. Note: Punned thickess i.e 18 cm shall be measured for paymeny purpose.

M&L for sub class 'B' bricks old size, laid dry flat over the cable abutting each other, length of cable equal to width of brick, complete all as specified and directed.

M&L for 75mm dia High Density Poly-Ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, for road crossing of cable or for cable protection laid in trenches or above ground surface ,complete all as specified and directed.

M & L in replacement for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to a depth not less than 1.5 mtr below ground level connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 including GI pipe 15 mm dia light grade for protection to the extend of 7.5 mtr as earthing lead connecting to equipment with provn charcol and salt complete including PCC chamber with RCC cover watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, including excavation and earth work and returning, filling in including ramming and removal of surplus soil and testing on completion complete.