PROVN OF HARD STANDING (PAVER BLOCK) FOR VEH WAITING AREA IN SUP DEPOT ASC AND PROVN OF SECURITY LIGHT ALONG WITH 35 X POLES ALONGSIDE BOUNDARY WALL OF OTM AREA UNDER GE (I) KANPUR

Amount

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Removing excavated soil exceeding 50 m but not exe 250m distance and depositing where directed at alevel n exc 1.5 metre above the starting point . complete all as specified and directed.

M&L hardcore of broken stone or boulder of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to true surface all as specified.

M&L 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in as in sub base all as specified and directed.

M&L of Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade

M&L of Sand filling under floors or in foundations including watering and consolidation

Providing precast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in kerb stone, window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar complete (1:4) with joints to match ®

M& L for providing precast cement concrete in 1:2:4 type B1 using 20 mm graded stone aggreate as in RCC cover slab (for drain etc), chullah hoods complete all as specified

Mild steel TMT bars 10 mm dia & over, cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia., complete all as specified.

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables, foundation filling of poles or stays and for rerouting of cables.

All as per item No-10 but depth exc 1.5 mtr but not exc 3.00 mtr

Returning filling, in including spreading, levelling, watering and well ramming in layers not exc 25 cm each all as required.

M&L for sand cushioning to underground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable

Supplying and laying sub class b bricks old size, size 230mm x 115mm 75mm complete all as specified and directed.

M&L for drilling manually in soft / loose soil under road / hard standing / culvert / nala of suitable bore for protection pipe upto 50 mm bore complete all as specified and as directed by Engineer in Charge. Note: Depth of bore shall not be more than 1 Mtr from original ground level.

Material and labour for GI tubing light grade 40mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole complete all as specified and as directed.

Material and labour for GI tubing light grade 20mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole complete all as specified and as directed.

M&L for pre cast cement concrete ( 1:4:8) type D2 using 40mm graded stone aggregate for foundation filling of poles as mass concrete.

M&L for pre cast cement concrete ( 1:3:6) type D2 using 40mm graded stone aggregate for foundation filling of stays.

M&L for pre cast cement concrete ( 1:2:4) type D2 using 40mm graded stone aggregate for foundation filling of stays.

Supply and laying in trenches or fixing to wall/pole or passing through pipe XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 35 Sqmm 3.5 core.Make of cable Gloster/Havells/ Grandlay/Plaza. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification)

Supply and laying in trenches or fixing to wall/pole or passing through pipe XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25 Sqmm 4 core.Make of cable Gloster/Havells/ Grandlay/Plaza. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification)

Supply and laying in trenches or fixing to wall/pole or passing through pipe XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 4 core.Make of cable Gloster/Havells/ Grandlay/Plaza. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification)

Supply and laying in trenches or fixing to wall/pole or passing through pipe XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 4 core.Make of cable Gloster/Havells/ Grandlay/Plaza. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification).

Supply and laying in trenches or fixing to wall/pole or passing through pipe XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 2 core.Make of cable Gloster/Havells/ Grandlay/Plaza. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification).

Supply, erecting and installation of steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long) duly painted with two coat of black bituminous paint through out, internally and externally up to planning depth and painting remaining portion of pole with two coat of aluminium paint to the entire exposed surfaces over one coat of red oxide primer making/painting three Nos circular strips each of 30 cm wide with one yellow and 02 Nos black colour strip synthetic enamel paint and marking pole number with black paint all as spfd and directed. (Note : Excavation, earth work, PCC work shall be measured and paid separately under respective items)

S&F of bus bar chamber with MCB SP 6 Amps-01 No outdoor type of size 400 x 380 x 190 mm made out of MS sheet 3mm thick with alum bus bar three phase & neutral each 320 x 20 x 6 mm of size fixed on insulators and fixing on steel pole with proper clamps, nuts , bolts & washers of required size and making connection of LT cables with thimbles, glands and making good the disturbed surfaces incl water proof PVC sticker like danger mark all as required at site. Make : Sintex or equvalent

M&L in replacement of Earthing complete with galvanized earth plate electrode 600 x 600 x6.3 mm thick buried directly in ground ( earth pit not less than 2.5 M below normal ground level ) with top edge of the plate not less than 1.75 M below normal ground level connected to and including galvanized steel wire 4mm dia as earth lead Earth plate to pole test point including 25mm GI light grade pipe for earth protection from earth point to earth plate surrounded by 150mm thick alternate layers of charcoal dust mix all with 35% common salt, 20mm bore medium grade GI Pipe for watering PCC pit type 1:3:6 type C-1 using 20mm graded stone aggregate, with RCC 50mm thick cover in 1:2:4 Type B-1 reinforced with 8mm dia TMT bars @ 8mm c/c both way. GI check nut, funnel with wire mesh necessary excavation and earth work in any type of soil all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 complete all as specified and directed.

Supply and fix High power LED street light 60 Watt IP 65 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power LEDs as light source and electronic driver fixed on pole/wall along with service bracket as per sample, clamps, nuts, bolts, and washers as directed incl electric connection with 1.5 Sqmm multistranded twin core copper cable PVC insulated from junction box to street light complete all as spfd. Make : Wipro/ Havells/ Phillips/ Bajaj/RR Kabel

Supply, fixing, testing and comissioning of automatic street light switch of capacity 8 KW in single phase using nature switch for automatic switching of street lights based on LUX level of natural light. The sensor (nature switch) along with suitable power contactor, MCB and support terminals enclosed in pole / wall mounted enclosure made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (Make: Sintex) conforming to IP54, including mounting arrangement with suitable size of FI clamps 02 Nos with complete acessories as under including taking down old street light switch complete all as specified and directed. (i) Contactor rating (AC3) single phase, 50-63 Amp : [Make : BCH/L&T/Schneider] (ii) MCB 63Amps (SP),10 KA, 240 volts: [Make : Schinder/ Legrand/ L&T] (iii) NATURESWITCH-01 [Make: HEALER (Model No. SWADEEP - 02EC8KW1P)]

ASIA BUILDER

M/s DKS Engineering Works

murty construction company

A.B.Enterprises

S B ENTERPRISES

SHUSHILA TRADERS AND CONSTRUCTION

M/S YOGESH KUAMR PANDEY