Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC P O WEST SRIPURIA DIST TINSUKIA ASSAM PIN 786 145 | TINSUKIA | ASSAM | 786145 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹37.7 L+₹1.1 L (3.13%)Rejected-Finance | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹38.1 L+₹1.5 L (4.19%)Rejected-Finance A 153 HQ CE EC KOLKATA LEKHAPANI POST TINSUKIA DIST ASSAM STATE | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹38.6 L+₹2.0 L (5.50%)Rejected-Finance | L4 | Rejected-Finance Higher bid value | |
| 5 | L5₹38.7 L+₹2.2 L (5.95%)Rejected-Finance | L5 | Rejected-Finance Higher bid value |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
26 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DINJAN
GE DINJAN, PANITOLA (PO), DIBRUGARH (DIST), ASSAM
PERIODICAL SERVICES TO OTM ACCOMMODATION AND B/R REPAIR TO MES INSTALLATION UNDER AGE B/R - II AT DINJAN MIL STN UNDER GE DINJAN
2022_MES_520983_1
C/8410/E8
Open Tender
Civil Works
Item Rate
270 days
DINJAN MIL STN
AS PER TENDER DOCUMENT
10 documents required · 10 mandatory
₹500
GE DINJAN
₹70,000
Yes
8 Jul 2022
29 Apr 2022
28 May 2022
29 Apr 2022
26 May 2022
12 May 2022
60 days
Amount
M&L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old decorated plastered surface of wall and applying one coat of distemper oil emulsion on complete all as specified and as directed.
M&L for preparing of old decorated surfaces of walls and applying one coat of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
M&L for preparing old plastered surface of wall care by complete removal of existing treatment and making two coats of distemper oil-emulsion over a coat of primer over a coat of wall care putty (2mm thick) complete all as specified and as directed
M&L for preparation old decorated external surfaces of wall, chajja, facia etc by complete removing old paints by mechanical scrubber without disturbing the plastered surfaces and applying one coats of water based acrylic weather proof exterior emulsion (exterior wall finish) paint over a coat of primer as per manufacturer's instruction complete all as specified and as directed.
M&L for preparation new external surfaces of wall, chajja, facia etc and applying two coats of water based acrylic weather proof exterior emulsion (exterior wall finish) paint over a coat of primer as per manufacturer's instruction complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound weight of cement as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately.
Supply only liquid water proofing compound (ISI marked) complete all as specified and directed. Make: CICCO No-1/SIKA/ACCO PROOF
M&L for 10mm thick rendering on concrete surface of ceiling in cement mortar (1:4) and rendering is to be finished even and smooth with out using extra cement complete all as specified and as directed.
M&L for 5mm thick rendering on concrete surface of ceiling in cement mortar (1:3) and rendering finished even and smooth with out using extra cement complete all as specified and as directed.
M&L for applying three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and as directed.
M&L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of primer 3mm thick wall care putty to a smooth surface complete all as specified and as directed.
M&L for preparing of new surfaces of walls and applying two coat of cement base paint over a coat of alkali resistant primer complete as specified and as directed.
M&L for preparing of old decorated surfaces of over head tank wall and applying one coat of cement base paint over a coat of alkali resistant primer including temporary bamboo stagging arrangement and scaffolding upto 30 mtr of height as required complete all as specified and as directed.
M&L for preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old painted wooden surfaces of any description not exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of new or previously treated surface and painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exceeding 10 cm wide and applying 2.5 mm thick road marking paint (retro-reflective and white or golden yellow ) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surfacecomplete all as specified and as directed.
Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for non skid coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm (300x300x7mm) over 20mm thick screed bed or bedding in cement mortar (1:6) on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade complete as specified and as directed.
M&L for glazed, ceramic, coloured tiles of size 300mm x 200mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor (1:4) and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5Sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5Sqm and not exceeding 4.00Sqm each complete all as specified and as directed.
S&F for solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling and fixing in opening as per specification and drawing complete all as specified and as directed.
S&F for factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification and drawing complete all as specified and as directed.
S&F for 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and as directed.
S&F for 200 mm long aluminium anodised barrel barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F for 125 mm aluminium handles cast type, anodised complete all as specified and as directed.
S&F in repairs, vitreous china squatting pan, 'Orissa' pattern, size 580mmx440mm, white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing complete all as specified and as directed.
S&F for door or gates of angle or other section with gusset plate , rail braces etc complete drilled for fixing of steel sheeting or other covering , doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings ( exclusive of steel , sheeting or other covering , running rails and guisides ) and hanging also fastening and confirming to steel Fe-290 (Gde E-165) fixing complete all as specified and as directed.
S&F for pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.25 mm thickness, size 125 mm X 60 mm, Profile D, double rebate including hinges, mortar guards, lock strike plate, shock absorbers including filling of concrete (1:3:6) type C1 (using 20mm graded aggregate) back of chowkats complete all as specified and as directed.
S&F for pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.25 mm thickness, size 105 mm X 60 mm, Profile B, single rebate including hinges, mortar guards, lock strike plate, shock absorbers including filling of concrete (1:3:6) type C1 (using 20mm graded aggregate) back of chowkats complete all as specified and as directed.
M&L for 35mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of 12mm thick veneered particle board medium density with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed, Sizes/section of members of shutters shall be as specified in SSR Part I, Section -8, clause 8.24 (a).
S&F for 35 mm thick, glazed/skeleton shutters with second class hard wood,open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a) complete all as specified and as directed.
S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars, devotailed or welded complete all as specified and as directed.
S&F for steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and as directed.
S&F for steel ventilator with centre hung shutter including two pair of brass cup pivots, catch spring and pulley wheel complete all as specified and as directed.
S&F for mild steel window guard bars, plain, let in and fixed independently in wooden frames, L or T section, supports for shelves etc., and similar articles conforming to Fe 290 (Gde E-165) including drilling holes complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and as directed.
S&F for galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete as specified and as directed.
S&F for sheet glass 3.0mm thick ordianary quality and galzing with wooden beads or oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as direcetd.
Taking up or down 15mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.
Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and as directed.
Refixing of 15mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete obtained from item No. 49 here in before complete all as specified and as directed.
M&L for taking up or down 20mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.
Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and as directed.
Refixing of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete obtained from item No. 52 here in before complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floor or pavings of any description not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.
Dismantling water tanks capacity exceeding 250 litres and not exceeding 500 litres and removing to store complete all as specified and as directed.
S&F for 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe all as specified in SSR Part I and as directed.
S&F for 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and as directed.
S&F for 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and as directed.
S&F for 15 mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repairs PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified and as directed.
S&F in repairs, 15 mm bore, bib tap, PTMT (PVC) with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F for 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, etc complete all as specified and as directed.
S&F for 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with rubber ring joints fixed to wall using MS holder bat for soil pipe/ rain water, etc complete all as specified and as directed.
S&F for 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.
S&F for 110mm bore PVC (SWR) bends with oval access door complete all as specified and as directed.
S&F for 75mm bore PVC (SWR) bends with oval access door complete all as specified and as directed.
S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges and keeping serviceable sheets in safe custody for reuse in the work complete as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of profile as approved, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and as directed. Note : Colour of ridge shall be same colour as that of sheet used for roof.
M&L for water proofing treatment on RCC roof etc. comprising with the following operation and as specified herein below and as directed:- (a) Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100m & n.exc.250m. (b) 15 mm thick plastering in cement mortar 1:4 finished even & smooth. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 liters per sqm conforming IS-3384 (e) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm )shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (f) One coat of aluminium paint over the APP based membrane @ 0.11 Kg/Sqm
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
M&L for brick work using locally available first class bricks sub class 'B' bricks (old size brick), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 complete all as specified and as directed.
M&L for 75 mm thick, plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and as directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L for machine pressed precast conctete interlocking paver block any shape and any size confirming to IS 15658-2006 of 60mm thickness, M -35 grade with grey cement and no pigment complete all as specified and as directed.
M&L for PCC 1:2:4, type B0 (using 12.5mm graded aggregate) as in copings, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work complete all as specified and as directed.
M/s GANDHESWAR PHUKAN
R.D.CONSTRUCTION
M/S Karen Enterprises
M/S AUTOMOTIVE WORLD
M/S CHANDAN ENTERPRISE
jitendra narayan goswami
AFTAB ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .