SPECIAL REPAIR TO SEWAGE SYSTEM FROM RECT LINE TO STP NEAR ASSAULT COURSE AT ARMY AD CENTRE INCLUDING CERTAIN EM SANCTIONED WORKS AT GMS UNDER GE I GOS

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth in soft / loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and exceeding 1.5 m but not exceeding 3.0 m depth in soft / loose soil complete all as specified and directed

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil etc complete all as specified and directed

Removal of excavated materials not exceeding 50 m and depositing where directed complete all as specified and directed

M&L cutting of bituminous road to the width and depth required for laying SWG pipe or sewage line including hacking , benching and including making good to top surface of road with bitumen & aggregate as per road specification complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 200 mm internal dia of pipe complete all as specified and directed.

S&F in repair NP2 pipe laid and joineted ,with collar 300 mm dia (in drain work) complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 300 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed

M&L for RCC, M-30 Design Mix Concrete (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed. Note: Reinforcement and form work shall be measured and paid separately.

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for RCC, M-30 Design Mix Concrete (using 20mm graded stone aggregate) as inColumns,pillars,piers,posts and struts etc complete all as specified and directed.

Formwork to Square,rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for RCC, M-30 Design Mix Concrete (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Mild steel TMT bars 8mm dia and over, cut to length, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for removing of sludge from septic tanks including removal of sludge water manually or mechanically in all respect and removing the sludge to distance not exceeding 500 mtrs and burried in to the ground and making to a true surface and covering with loose soil and complete all as specified and directed. (The rate included excavation and filling )

M&L 300 mm dia Cast iron pipes with spigot and socket ends centrifugally cast. Class LA, in any length laid in trenches complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth and getting out soft/loose soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed.

M&L for dry sand for cushioning to underground cables 8cm thick before laying cable and 15cm thick after lying and streching the cable, complete all as specified and directed. Note :- For payment purpose punned thickness shall be measured.

Removing surplus soil to a distance n.exc 50m and depositng where directed at a level not exceeding 1.50 m above the starting point, complete all as specified and directed.

S&F sub class ‘B brick, old size, as cable protection cover, laid dry, flat, transversally along the length of cable, on sand cushioning, with width equal to the length of the brick, complete all as specified and directed.

M&L for laying in replacement of steel water tube medium grade under road/ path of 80 mm bore complete all as specified and directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 Core complete all as specified and directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 3.5 Core complete all as specified and directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm 3.5 Core complete all as specified and directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 Sqmm 3.5 Core complete all as specified and directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 Sqmm 3.5 Core complete all as specified and directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 185 Sqmm 3.5 Core complete all as specified and directed.

M&L in repairs complete with galvanised steel earth plate electrode 600x600x6mm burried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of earth plate not less than 1.5mtr below normal ground level connected to the Galvanised iron strip 32x6mm size by means of bolts ,nuts,check nuts and washers of galvanised iron and 32x6mm GI strip procted by provision of GI light grade pipe 40 mm bore incl provision of concrete pit in PCC1:2:4 type B-1, using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg /Sqm and 6mm dia bar handle ,excavation and earth work in any type of soil ,charcoal dust and salt light grade GI watering pipe 20 mm bore with funnel and wire mesh and medium grade GI protection pipe 15mm bore 5 Mtr long and GI strip upto main earthing of pole complete all as shown in electrical plate No 3 of MES Sch 2009 Part-I all as specified and directed. Notes:- (i) Main earthing strip from earth plate electrode to test point upto length of 7.5 metres length shall deem to be included in the unit rate quoted against this item. (ii) GI protection pipe & earthing lead beyond 7.5 metres shall be measured and paid for seperately under appropriate item of Sch A part-I. (iii) On testing after completion if desired resistanace is not obtained, the contrator shall redo the earthing without any extra cost to the department.

S&F cable jointing kit in replacement for 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 6 to 16 Sqmm 4 core complete all as specified and directed. Make - 3M or equivalent of higher cost

S&F cable jointing kit in replacementfor 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 25 to 50 Sqmm 4 core cocomplete all as specified and directed. Make - 3M or equivalent of higher cost

S&F cable jointing kit in replacement for 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 70 to 120 Sqmm 4 core complete all as specified and directed. Make - 3M or equivalent of highe cost.

S&F cable jointing kit in replacement for 1.1 KV (Earthed) grade cable for heat shrinkable straight end termination kit outdoor type complete with jointing material and accessories suitable for XLPE, LT cable, 1100 volts grade of size 150 to 185 Sqmm 4 core complete all as specified and directed. Make - 3M or equivalent of higher cost.

Supply, fabricate, erect, test and commissioning in replacement outdoor LT SMC Feeder pillar box totally enclosed weather and vermin proof, suitable verntilated, 440 Volts, 50 HZ, AC Supply, factory made standard design as per electrical requirements to suit power distr sys , enclosure fabricated out of 3.15 mm thick MS sheet, excavation and earth work, PCC foundation etc,with hinged doors and lcoking arrangemetn , air vents, tappered roof, incoming and outgoing cable connections from bottom with compressed cable gland etc as required with and including the following, supplied fitted and connected internally complete 04 Nos aluminium bus bar of unequal size of aluminium conductor with PVC coloured heat srinkable type sleeves continous phase rating 400 Amps and neutral rating 200 Amps mounted on non cracting resin type insulators complete all as specified and directed.

M&L for boring of holes horizontally for laying of 80mm dia pipe (minimum depth 0.60 Mtr from top level) under road, Pavement, hard standing complete all as specified and directed.

M/s Ats Electricals

M/s MAA BHAIRABI ENTERPRISES

HARAGOURI SUPPLIERS