S.I.T.C. of 13 Passanger Machine Rooms Less lift on Foot over Bridge at Kardampuri Yamuna Vihar on Road No. 66 (SH- Supply and Fixing of Electrical installation at Bridge at Kardampuri Yamuna Vihar on Road No. 66 Delhi.)

Amount

Fabrication, supplying and installation of outdoor type cubical feeder pillar of 350 mm deep made out of M.S. sheet 2 mm. Thick (14 SWG) duly compartmentalised having 4 strip busbar aluminium of 200 amp capacity double door with locking arrangement for protection from rain, dust duly fixed on M.S. angle iron frame work of size 50mm x 50mm x 6mm (NS) 90 cm long out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement 2 sand : 4 stone aggrete 20 mm) and having following accessories mounted inside the cubical panel including connection, interconnection with two nos. earth studs duly painted with one coat of red oxide and two coats of superior quality powder coated painting complete etc as required. (CPRI Approved)

Supplying and fixing of following accessories in the existing cubical panel board / feeder pillar including connection testing etc as required. 125 A, 16 kA,TPMCCB

100 Amp /63 Amp 16 KA TPMCCB

Indication lamps (RYB) with control HRC fuse with fuse fitting.

Danger notice plate

h). 63A DPMCB

Timmer

Contactor ML-2

S.I.T.C of 10 to 12 Watt LED bulkhead cast aluminium heavey power coated surface mounted fitting i/c connection with 1.5 Sq.mm PVC insulated copper conductor wire i/c testing connection and commissioning etc as reqd.

Supplying, Installation testing & Commissioning LED flood light fitting luminaries of rating 45 Watt made with high pressure die cast aluminium housing with white powder coated and polycarbonate dissuser suitable for operation on 150 to 265 Volt single phase AC supply, having system efficacy not less than 100 luman per watt and colour tempeture of 5700 K CRI >70 with driver having power factor > 0.95, THD<20% and efficiency > 85% ported drive should be IC complete with minimum 2.5 KV surge protection, LED life shall be not less than 50000 buring hours IP 66 complete etc including connection with 1.5 Sq.mm PVC insulated copper conductor FRLS cable complete as required.

Supplying and Fixing pole box with hot press mounted SMC pole box (Sintex make) of inside dimension 250mm x 200mm x 105mm deep having hinged cover on the 8/10 mtr pole including suitable locking arrangement and 1 no. SPMCB with all accessories mounting system and single phase aluminum backlight connector 16 amp capacity for terminating of single phase cable including gasket connection complete etc as required.

Supplyiing and fixing of 22 Watt LED surface type and round type downlighter dia cast aluminium alloy housing with corrosing resistance powder coating for operation 220 Volt 50 Hz single phase AC supply i/c hanging arrangement connection, testing etc complete as reqd.

Supplying and Laying of following size one number PVC insulated and PVC sheathed / XLPE armounrd Copper Conductor power cable of 1.1 kV grade on wall surface as required. (clamped with 1mm thick saddle) a). 3 x 1.5 Sq.mm armounrd Copper Conductor power cable

Supplying and Laying of following size one number PVC insulated and PVC sheathed / XLPE armounrd Al. Conductor power cable of 1.1 kV grade on wall surface as required. (clamped with 1mm thick saddle) a). 4 x 25 Sq.mm armounrd Aluminum Conductor power cable

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 4 X 25 sq. mm (28mm)

SAINI ELECTRICALS