SPECIAL REPAIRS TO CERTAIN TOILET OF AIRMEN BILLETS BLDG NO P-138 (3A,3B,3C,4A,4B,4C AND 5A,5B,5C) OF MTC AT CHAFB

Amount

Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-charge.

S&F Solid PVC door frame of size 50mmx 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as per specification and drawing.

S&F factory made solid panelled PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail ,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and joint together with solvent cement,, supply and fixing in the frame.

S&F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S&F 125 mm long Aluminium, anodised, barrel tower bolts of extruded section

S&F 75mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-Charge.

S&F Pressed steel frames for doors size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed

S&F Pressed steel frames for doors size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as filled in pressed steel foor frames etc complete all as specified and as directed.

S&F mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.

S&F second class hard wood 35mm thick plain framed panelled shutter (2 panels) with lock rail and panelled of 9mm (BWP ) commercial ply or 12mm venered particle board with commercial veneering on both face the size of rail and style as per (IS 1003 PART I) kiln seasoned and chemically pressure treated section exc 13 and not exc. 25sqcm all as per specified and as directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton factory made shutter open rebated and prepared to receive glass, gause etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F in repair mild steel helical door spring 300mm long ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section

S&F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding ( but not backing) and rubbish off the premisies complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic tiles coloured of size 450X 300X 7mm thick as vertical sruface set and jointed in neat cement slurry and pointed in white or colour cement mixed with pigment to match the shade of the tiles complete all as specifiedc and as directed with 10 mm th rendering 1:4 for laying wall finishes complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specified and as directed

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering rendering 10mm thick in cement morter 1:6 and 5mm thick in cement morter 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc finished even and smooth without using extra cement complete all as specified and as directed.(Note : WPC shall be measured and paid separetely)

Supply only water proofing compound complete all as specified and as directed.

M&L for rendering 5mm thick on concrete surfaces of ceiling in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels , commercial type on both sides, fixed to chowkhats all as specified and directed.

Demiolition of concrete of any description and in any position including existing treatment of sunken floor complete all as directed by Engineer-in-Charge.

M&L for PCC 1:5:10 Type E-2 (using 40mm graded aggregate) as in filling in sunken slab complete.

M&L for providing water proofing treatment to sunken floor complete all as per following specification:-Providing 20mm thick cement plaster in cement mortar 1:3 in mixed with Pidi Proof LW or Dr Fixit @ 200 ml per 50kg of cement and finished even and smooth surface without using extra cement. Note : WPC shall measured and paid saperately

Application of two coats of pidifin 2k water proof coating to sunken floor i.e proof coat of Pidilite @ approx 1.00 Kg per sqm as per manufactures instructions. Note :- for item No 32 & 33 (i) The rate includes for preparation of surface treatment and sealing of all joints, cracks, corners and junction of pipes etc and ponding test complete all as specified and directed by Engineer-in-Charge . (ii) PCC filling shall be measured and paid separately. (iii) Water testing of sunken floor shall be carried as per direction of GE & rates quoted by the tenderer shall be deemed inclusive of expdr incurred on testing.

S&F in repairs Vitreous China urinals, bowl type (back or corner wall type), half stall complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repairs urinal Spreader incl fixing with 15mm dia pipe all specified and directed.

S&F in repairs white colour vitreous china wash basin oval type (18 X 13 X 7 inch size) including brackets, 32mm dia CP waste coupling, waste pipe, short connection complete all as specified and directed.

Supply only 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed (Fixing include in item No 36).

S&F in repairs vitreous china squatting pan Orrisa pattern of size 580 X 440mm white with integral foot rest 'P' trap including connection to trap and flush pipe anti-syphonage pipe etc complete including making good to floor.

S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern), White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc. complete.

Supply only plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device (Fixing include in item No 39).

Supply only PVC flushing cistern with flush out valve type,10 ltrs capacity,low level white with inlet ball valve,float and handle including bracket including flush pipe complete (Fixing include in item No 38 & 39).

S&F in repair 15mm bore PVC connection pipe 450mm long with PTMT nuts at bolt ends.

S&F in repair bib taps, fancy type with long neck chromium plated with crutch or butterfly hadle screwed down screwed for iron pipe or brass ferule of 15mm bore complete all as specified and as directed. (Make : Marc or Equivalent)

S&F in repair 125mm dia chromium plated shower rose including arm with swivel joints including fixing to steel pipe or union.

S&F in repair stop valve,fancy type chromium plated with long shank and cup (concealed type) (medium) screwed down,high pressure with crutch or butterfly handle,screwed both end for iron pipe or for union of 15mm bore complete all as specified and directed .

S&F in repair brass CP towel rail, 20mm dia,600mm long including brass CP brackets. complete.

S&F in repairs Stain less steel soap dish of approved make all as specified and as directed. Make: Cat No. 18092 of ARK orequilvalent make in JAQUAR

Taking up or down steel tubing and connections,15mm bore including removal of unserviceable pipe from site of work complete all as directed.

All as per item ser No. 49 above but 20mm bore.

All as per item ser No.49 above but 25mm bore.

Cutting chases for concealed water tubing and making good cutting not exceeding 10cm girth in stone concerete block wall all as specified and as directed.

S&F in repairs 15 mm bore fancy type, chromium plated Stop valves screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specifed and directed.

Taking down steel window/ventilator (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-charge.

Taking down shutters of any description exc 1 sqm but nexc 2 sqm each incl easing and adjusting and re-fixing in the same opening all as specified and directed.

S&F tubing,medium grade,15mm bore with all fittings fixed to walls and ceiling or laid in floors including testing complete all as specified and directed.

All as per item ser No 56 above but 20mm bore.

All as per item ser No 56 above but 25mm bore.

S&F aluminium sheet of thickness 0.60mm & height 900mm all as specified and directed by Engr-in-Charge.

Dismantling of PVC drain pipes of 75/100mm bore, including all fittings, jointed in cement mortar and taking out of trenches, if required and removing from site of work complete all as directed.

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints laid in floor.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints laid in floor.

S&F PVC (SWR) bend with access door 110 mm bore.

S&F PVC (SWR) bend 110 mm bore.

S&F PVC (SWR) double (double Y) branch piece, with access door 110 mm bore.equal or unequal

S&F PVC (SWR) Branch piece single (Single Y) equal or unequal with access door 110mm bore.

S&F PVC (SWR) 110mm bore vent cowl

S&F PVC (SWR) 75mm bore bends any radius with access door.

S&F PVC (SWR) 75mm bore bends any radius.

S&F PVC (SWR) junction single (Single T) equal or unequal with access door 75mm bore.

S&F PVC (SWR) 75mm bore vent cowl

S&F PVC (SWR) Branch piece single (Single Y) equal or unequal with access door 75mm bore.

Demolition and breaking up drain pipes of 100mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as specified and directed.

Demolition and breaking up drain pipes of 75 mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as specified and directed.

M&L for cutting holes for pipes for a superficial area exceeding 150 sqcm and not exceeding 400 sqcm in to or through brick walls built, in CM and making good in CM 1:3 or 1:2:4, type B1 all as specified and directed.

M&L for cutting holes for pipes for a superficial area exceeding 150 sqcm and not exceeding 400 sqcm in to or through stone walls built, in CM and making good in CM 1:3 or 1:2:4, type B1 all as specified and directed.

Removing building materials etc. (other than spoil payable under items -Earthwork) to a distance of 1.5Km or out of MD Land, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n exc 15 cm thickness ( below or above ground level) all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and fair.

Demolition of RCC n.exc 15cm thickness complete all as specified and as directed

M&L for precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slab of manholes, septic tank etc, set in cement mortar (1:4) including necessary form, moulds etc and including taking out/removal of existing unserviceable cover slab from manholes /septic tank complete as specified and directed. (Note :- Reinforcement shall be measured and paid separately)

M&L for Mild steel TMT bars 10 mm dia and over as in reinforcement cut to length, bent to shape required including cranking and binding with MS wire (annealed) not less than 0.90 mm dia as in reinforcement complete all as specified and directed.

S&F PVC (SWR) 75mm dia multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed

S&F in repair PVC (SWR) floor trap 100/110mm dia, plain with grating including jointing with solvent cement

S&F in repair PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement

M&L for 50mm high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/sqcm fixed comolete to walls, ceilings or in floors including all necessary fittings etc.

M&L for preparing new plastered surface of walls and applying two coats of cement base paint over a coat of primer including necessary scaffolding complete all as specified and as directed

M&L for 3 coat of white washing as in wall of newly plastered surfaces including preparations of surface etc. complete all as specified and as directed.

M&L for preparing new plastered surface of ceiling and applying three coats of white wash including necessary scaffolding complete all as specified and as directed.

M&L for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete all specified and directed.

S&F steel window with side hung shutter including projecting type hinges with steel handles and steel peg stay and with glazing bars complete all specified and directed.

S&F steel window with side hung shutter including projecting type hinges with steel handles and steel peg stay but without glazing bars suitable for fixing of gauze all as specified with dovetailed or weldedcomplete all specified and directed.

S&F for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings; framework of watertanks and similar work confirming to Fe-290, Gde E-165 all as specified.

Hacking out old broken glass (any thickness ,size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips glazed with putty and removing materials from site of work all as directed by the Engineer-in-charge.

S&F for 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.50 sqm in each pane complete all as specified and as directed.

All as per item ser No.99 above but frosted on one side complete.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25 mm bore complete all as specified and as directed

S&F GI wire 4mm dia and above for hanging cloths and mosquitos hanging with all necessary arrangement fixed to wall or piller and tightening and properly fixing complete all as specified and directed by Engr in chagre

M&L for removing existing water proofing treatment of any description and cleaning with roof surface with wire brush and water complete and disposing debris to a distance of 500m from the starting point all as specified and directed by Engr in charge.

M&L for rendering 15mm thick in cement mortar 1:3 mixing with water proofing compound on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement all as specified as directed.

Supply only integral water proofing compound

M&L for water proofing treatment on horizontal and vertical surfaces with applying of oil bound bitumen primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0 Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 grm/Sqm having softening point not less than 150 degree centigrade, having tensile strength of 650 N/5cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch on application including minimum 10cm side over lap and 15 cm end lap applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.20 Kg/Sqm finished with solar reflective bituminus paint/primer @ 0.10 kg per sqm all as specified and directed by Engr in charge.

M&L for preparation of plastered or un plastered old decorated surfaces of ceiling by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of white wash all as specified and as directed.

M&L for preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of cement base paint complete all as specified and as directed.

M&L for preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of white wash including necessary scaffolding complete all as specified and as directed.

M&L Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window-cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite shade including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes including dismantling of existing granite slabs of any description or thickness all as specified and as directed by Engr-in-Charge.

M&L for preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of distemper oil emulsion, white or tinted including necessary scaffolding complete all as specified and as directed.

S&F floor door stopper of aluminiumalloy body Overall length of cover plate 140mm and tongue, anodised, with hard drawn steel spring, fixed in floor

Taking down carefully surface copper point wiring (light,fan, socket or power ) complete including its connected fitting/fixtures ceiling roses, , switch , switch socket combination etc and making good disturbed surfaces of wall roof etc complete all as specified and directed.

Material & Labour for Point wiring complete concealed type with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC conduit of suitable size, with all necessary fittings concealed in walls/roof etc, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated hylam sheet top cover for housing switches, sockets, regulators etc. complete all as specified and as directed. One light point controlled by one single pole 5 Amps switch. Note:-Colour code shall be used for point wiring ,ie Red/Yellow/Blue colour wire for Phase,Block colour wire for neutral and Green colour wire for earth.

All as per item ser No 117 above but One fan point controlled by one single pole 5 Amps switch

All as per item ser No 117 above but One switch socket out let point 5 Amps on same board with other switches

All as per item ser No 117 above but One switch socket out let point 5 Amps on independent board

Supply and fixing in replacement of Piano type switch single pole 5 Amps one way 230 volts complete all as specified and directed.

Supply and fixing in replacement socket outlet 5 pin, 5 Amps, flush type, universal complete all as specified and directed.

Material & Labour for Point wiring complete concealed type with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 2.5 sq mm nominal area, passing through heavy grade PVC conduit of suitable size, with all necessary fittings concealed in walls/roof etc, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 2.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall , covered with 3mm thick electroplated hylam sheet top cover for housing 15 A switches, 15A sockets all as specified and as directed. Noted:-Colour code shall be used for point wiring ,ie Red/Yellow/Blue colour wire for Phase,Block colour wire for neutral and Green colour wire for earth.

Supply and fixing in replacement switch 15A flush type universal pattern 230 v complete all as specified and directed.

Supply and fixing in replacement socket outlet 6 pin multi purpose 5/15 Amps flush type complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite 65x25mm, three termimals complete all as specified and directed.

Supply and fixing in replacement concealed double door type DB for mounting of MCB for 240V, 4 way with 200 Amps rated Bus bar, single pole & neutral, complete all as specified and directed.

Supply and fixing in replacement miniature circuit breaker (MCBs) SPN, 240 volts, 10KA, 6 to 32 Amps ''C'' series complete all as specified and directed.

Supply and fixing in replacement miniature circuit breaker (MCBs) single pole, 240 volts, 10KA, 6 to 32 Amps ''C'' series complete all as specified and directed.

Supply and fixing LED light fitting 4 feet 20 watt,6000K of lumens not less than 100 / watt with inbiult driver LED complete including taking down old convention light fittings of type and wattage as per site all as directed. Make:-Havells Cat Pat No. LHEXBLP7PN1W020 or equivalent.

M & L for concealed sub main wiring as in repair with Two single core PVC insulated cable with copper conductor FRLS multistranded 1100 volts grade 2x4sqmm in and including heavy grade concealed PVC conduit and its accessories with fixing arrangements concealed in walls or ceiling etc including 4 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : Three run of copper wire and one run of PVC concealed conduit together taken as one length for measuring unit length.

M.VENKATARAMANAPPA AND COMPANY

docileworx

SHREE HARI BUILDERS

PRAGATHI BUILDERS

PRACHANIVA CONSTRUCTIONS