Repairing and maintenance of perimeter street lights installed at Operational area

Amount

Supply of following sizes of 1.1 KV grade XLPE insulated, PVC sheathed, armoured aluminium condutcor power cable as per IS:7098 (Part I) with latest amendments as required :-

4 core x 25 sq.mm

3.5 core x 120 sq.mm

3.5 core x 185 sq.mm

Laying of one number PVC insulated and PVC sheathed /XLPE power cable of grade 1.1 KV grade of following size in the existing RCC/HUME /STONEWARE/ METAL pipe as required . A) upto 35 sq mm

b) Above 95 sq.mm. and upto 185 sq.mm.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. A) up to 35 sq mm

b) Above 95 sq.mm. and upto 185 sq.mm.

Supply of 25 W LED Street light fitting fixtures with lamp & all accessories, pressure die cast housing with epoxy powder coated dark graphite colour or appropriate colour finish, prismatic polycarbonate cover with individual LED lenses, suitable for mounting on parpet corner complete etc as required (similar to but not less than 25W LED of Crompton make or equivalent) Cat. ref. - LSTS-25-CDL

Design, fabrication installation, testing & commissioning of Junction (loop in loop out ) box made of MS minimum dimension 125mm x 200mm x 115mm depth including clamp for mounting of this box on the exising poles, locking arrangement, hinged door, gasket of embedded technology etc all complete including supply and fixing the following accessories. i) 25 x 5 copper strip - 4 Nos of length 115 mm. with suitable insulator. ii) Earth stud - 2 Nos iii) SPMCB 6A, C-Curve. (Legrand or equivalent)

Erection of octagonal pole GI pipe steeet light pole of 4mtr long to the depth of not less than 0.5 mtr in the ground (including 40mm dia 1.5 mtr long GI pipe for cable protection from the ground) with cement concrete 1:2:4 ratio of size 0.3 mtr. X 0.3 mtr each side with 0.5mtr height coller & PCC platform of 1 mtr x 1 mtr x 0.2 mtr height at ground level around the street light poles as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conducter cable of 1.1 KV grade as required :- a) 4 x 25 Sq.mm.

b) 3.5 x 120 Sq.mm.

c) 3.5 x 185 Sq.mm.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.

Manish Electricals

SONU ELECTRICAL