AGE (I)/FAT/ET-54 OF 2021-2022

Amount

Taking down ceiling fan from fan hook and disconnection from ceiling rose and dismantling of ceiling fan parts i e. down rod and connector/condenser nut bolts, split pins, rubber bush (garari) condenser carrier clip (PVC) in build connector two way complete servicing by cleaning greasing/oiling before in side surface by CTC with sand paper and repair and re - fitted the same position and testing complete all as specified and directed on site. Note: - Only rubber packing (garari) condenser, condenser carrier clip (PVC) in build connector two way shall be measured and paid separately under supply only items.

Taking down Exhaust fan any type and disconnection from ceiling rose and dismantling i.e connector/condenser nut bolts, condenser carrier clip (PVC) in build connector two way complete servicing by cleaning greasing/oiling before in side surface by CTC with sand paper and repair and re - fitted the same position and testing complete all as specified and directed on site (Note: - condenser, condenser carrier clip (PVC) in build connector two way shall be measured and paid separately under supply only items.

Dismantling of cabin fan of any sweep and overhauling complete by means of cleaning of stator, oiling & greasing including replacement of nut and bolt etc and reassembling the same and testing complete all as specification and directed .

Dismantling of cabin fan of any sweep and rewinding the stator with super enameled copper winding wire of suitable size including greasing, cleaning of all components of fan reassembling , testing, commission complete all as specified and directed.

Dismantling of ceiling fans AC single phase 230 volts of sizes 1200mm/1400mm (collected from MES fan store) any make / model except old vintage, dismantled its stator,rotor, cutting out burnt copper winding and providing new winding with super enamelled copper winding wire existing size including cleaning of slots providing oil impregnated insulation paper or minimax, fibre, insulation in slots and well wraping with cotton tape, bind with cotton thread and varnishing over all with winding varnish as aproved by Engineer - In - chargee cleaning of bearing housing and shaft, replacing spares such as split pins, blade screws etc as required and deposited to MES store after testing complete all as specified and directed by Engineer -In - charge.

Ditto as above but for sizes 400/450mm sweep Ac single phase 230/240 volts….ditto….

Ditto as above but for sizes 300/380mm sweep ….ditto….

Ditto as above but for sizes 230/250mm sweep ….ditto….

Supply only condenser carrier clip (PVC) in build connector two way fixed with screw on down rod or housing complete all as specified and directed.

Supply only upper set of clips for down rod with rubber Bush (Garari) including set of nut bolts and washer, pin complete all as specified and directed.

Supply only rubber bush ( Garari ) for mounted at upper side of down rod clip all as specified and directed.

S&F gun metal bush self lubricated, any size ,suitable for ceiling and wall fans complete all as specified and directed

S&F flexible copper conductor stranded 1100 Volt PVC insulated cable three core, complete all as specified and directed.

Supply only Fan condenser of 2.5 MFD capacity , 230 Volts complete all as specified and directed.

Supply only Fan condenser of 3.15 MFD capacity , 230 Volts complete all as specified and directed.

Supply only Fan condenser of 4.00 MFD capacity , 230 Volts complete all as specified and directed.

S&F ball bearing of size 6201'ZZ'

S&F ball bearing of size 6202'ZZ' .

S&F ball bearing of size 6203'ZZ' .

S&F ball bearing of size 6204'ZZ' .

Supply and fixing down rod for ceiling fans duly painted with synthetic enameled paint 300 mm long19 mm outer dia with holes on both ends of the rod for connection wire replacement complete.

All as per item avbove hear-in- before but size 600 mm

Supply and fix in replacement Exhaust fan blade duly painted suitable for 450 mm/380mm sweep complete all as directed .

Supply and fix in replacement Exhaust fan blade duly painted suitable for 250 mm/230 mm sweep complete all as directed .

Supply only fan blade suitable for 1200mm sweep ceiling fan complete similar to original make with new screws Complete all as specified and directed.

Supply and fix in replacement outer frame complete with clamps, rubber packing, nut bolts etc & all accessories duly painted suitable for 450 mm /380 mm sweep exhaust fans complete all as directed .

Supply and fix in replacement outer frame complete with clamps, rubber packing, nut bolts etc & all accessories duly painted suitable for 230/250 mm sweep exhaust fans complete all as directed .

M& L for painting of ceiling fan of any size with one coat synthatic enamel paint including Writing/marking of MES No size of letters not less than 2.0 CM high and not more than 50 alphabets as approved colour as directed.

M&L for painting of Exhaust fan of any sizes with one coat synthatic enamel paint including Writing/marking of MES No size of letters not less than 2.0 CM high and not more than 50 alphabets as approved colour as directed.

S & F Five Stepped type electronic fan regulator flush type of 240 Volt on the existing hylem sheet cover 50 Hz AC complete all as specified and directed.

Removing unserviceable bearing shaft welding broken area and threading in lathemachine at appropriate size and refixing in ceiling fan any type complete all as specified and directed.

S/F in repair MS louvers self close of size 250/300 mm mounted in suitabale opening and connecting up incl making of opening of suitable hole and grouted in CM 1: 3 complete all as specified and directed.

S/F in repair PVC canopy of suitable size for 1200/1400mm sweep ceiling fan complete all as specified and directed.

M/S J.B.AND SONS

avon electric engineering woks