PROVISION OF HARD STANDING AND CYCLE PARKING SHED NEAR P-42 AND OTHER SANCTIONED WORKS AT INS AGRANI, COIMBATORE (2nd Call)

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard/ dense soil.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation etc or for shafts, wells, cesspits, manholes, etc and n.exc 10sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil.

Returning, filling in, incl spreading, levelling, watering and well ramming in layers n exc 25cm with useful soils

Excavationin post holes each n exc 0.50 cum getting out , returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25 cm in soft soil.

Removing excavated material to a distance n exc 50 Mtr and deposited where directed at a level n exc 1.5 Mtr above starting point in soil

Removing excavated material exc 1.50Km but n.exc 5.00Km and depositing where directed

M&L cement concrete type D2,1:4:8 (40mm graded stone aggt) as in foundation, filling and mass concrete as in sub floors complete all as specified and as directed

M&L Precast reinforcement cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in coverslab/ramp slab set in CM 1:4 all as specified ( reinforcement not included)

M&L precast cement concrete block masonry with solid blocks 1:3:6 type c1 using 20 mm graded aggregate and exc 10 cm in width and setting in CM 1:6 complete all as specified

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified

All as per above here in before but TMT bars 6mm dia to 8mm dia

S & F mild steel section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters Fe-410W (Grade E-165) complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F Pre-painted qalvatume aluminium Zinc coating G I based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering cladding to wall fixed with self tapping screw.

S&F Pre-painted qalvatume aluminium Zinc coating G I based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering cladding to wall fixed with self tapping screw.

M&L plain cement concrete type D-2, 1:4:8, (40 mm graded aggregate) 100mm thick as in floor / paving for sub base.

M&L UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings of bore of pipe 15mm

M/L broken stone hard core of guage n exc 63 mm deposited spread and leveled in layers n exc15 cm thick watered and rolled/rammed to a true surface.

M&L plain cement concrete type B-2, 1:2:4, (40 mm graded aggregate) 100mm thick as in floor and finishing cement concrete surface even and smooth without using extra cement.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finish the surface even and smooth without using extra cement

S&F Brass chromium plated Health faucet with hose (1.5m) and hook

S&F Brass chromium plated Angle valve, fancy type, cast copper alloy,screwed down for iron pipes 15mm bore

M& L for River Sand, spreading and leveling in floors

Supply, laying and testing cable XLPE insulated armoured heavy duty electric cables aluminium conductor 1100 volts grade corss sectional area 10 sqmm 2 core. Make: Glostar/Havell's/Finolex

M&L spread dry river sand for cable cushioning including well ramming and watering including punningon both top and bottom of the cable complete all as specified and as directed (only punned thickness shall be measured and paid)

Supply and lay common burnt clay building bricks sub class B for protection of cable that the legth of the brick is at right angle to the central axis of the cable all as specified and as directed

M&L for PCC (1:3:6) type C-1 using 20mm graded aggregate for providing cement concrete in roof, kerbs or mud stop, rounded or chemfered on edges comlete all as specified and directed

Supply and lay GI tubes light grade with connected fittings laid in trenches/wall/pole for protection to UG cables of size 25 mm dia. Make: Surya/Jindal/TATA

SENTOOR BUILDERSS