E Nit - 07 of 2025-26

Amount

Supply Erection ,Testing and Commissioning of 11/0.433 KV, 400 KVA 3-Phase Distribution Transformer with Bi-metallic terminal Connectors, Energy Level: 2, "BIS Marked" (Copper Wound) alongwith LV Cable Box Including Providing and Erection of Mounting Structure for Distribution Transformer up to 400kVA , GOAB Switch, Arcing Horn fuse Unit etc, mounted between two SP-35 or SP-58 (swagged steel tubular poles) 2.44m .The height of DT mounting channel should facilitate safety working clearance, as specified in ScheduleVII of the CEA (Measures relating to Safety and Electric Supply Regulations), 2010 Complete Sub station as required

Supply, Installation & commissioning of 11/0.433 KV Tapping Point including Transportation as required

Construction of Ground Mounted Plat form for DistributionTransformer above 250kVA upto 1000kVA at a height of 1.2metres from ground level , 2.5x2.0metres area, constructed with stone masonry and top PCC15 cm thick, as required.The height of DT mounting channel should facilitate safety working clearance, as specified in Schedule VII of the CEA as required

Providing and erection of steel tubular pole (SP 35) strut in cement concrete 1:3:6(1cement :3 coarsesand:6 graded stone aggre gate 40mm nominal size ) foundation (0.465 Cuminclusive of muffling) with plant in g depth of 2m including pole painting; excavation and backfilling of pole pit; carriage of Materials at site

Providing and erection of 9kV,10kA Lightning Arrester conforming to IS:3070 and IEC:60099 4 complete with Hard drawn stranded aluminium conductors galvanised steel wire reinforced: ACSR 6/1/2.59 mm Weasel ,M.S. Flat Iron of size 40x6mm and M.S. Nuts & Bolts of size 16x50mm full thread, as required.

Providing and fitting of Polymer Pin insulator for 11kV overhead lines with galvanised pin nuts, washers etc as required

Providing and fitting of porcelain disc insulator, 45kN (2nos.as a set) for 11kV overhead lines with insulator fittings, ball and socket type and complete with aluminiumalloy tension clamps, bolts, nuts, washers etc as required

Supply, Installation, Testing & Commissioning of 11kV GO, AB Switch 3-Phase, 3-Pole, 400 Amp, Vertical Type as required

Supply, Installation, Testing & Commissioning of 11 /33kV Horn Gap Fuse Set 3 Phase 400A as required

Providing & Fixing of Single Phase PVC Cable 400 mm² 1.1K V Grade, PVC Insulated Stranded Un-Armoured FRLS type alongwith Al. Thimbles for 400 mm² Cable termination with four colored PVC Tapings to distinguish the LT Phases and the Neutral. (2 Ckt)

Providing and erection of 2nos. of GI Channel Iron 75mmX40mm X6mm (7.14Kg per metre) double pole cross arm for three wire 11 kV overhead line conductors (horizontal formation) complete with through bolts and nuts for clamping to the poles including drilling of holes for insulator pins/fitting bolts, nuts and washers etc as required including angle iron reinforcement (for SP-35) as as required.

Providing and fitting of 2.5m long, 40mm dia meter,8 mm thick G.I. Earth Pipe fabricated for distribution Transformer Substationor 11kV CT PT Combination as per RECC on struction Standard F-5 Earthing, with accessories such as terminal connector, bentonite powder, 8SWG G.I.wire etc.per one DTS/S as required

Providing & Fixing of Pole mounted LT Distribution Box for 400 KVA DTR with 2 No. Triple Pole MCCB of 400 Amp with adjustable overload release of (80-100%) for incomer & & switch fuse unit for Out Going 2No Ckts. including Busbar arrangements for Phases & Neutral of EC Grade Aluminium,PVC Insulated Sleeved Busbar of required load handling capacity with colour code for Phases and Neutral differentiation, including Aluminium thimbles of required sizes for proper termination etc.

Providing and fitting of Single sided Brackets with MS Angle Iron 40mmX40mmX6mm (3.5 Kg per metre) for Distribution Box complete with jam clamp,bolts and nuts for clamping to the poles including drilling of holes for insulator pins/fitting bolts, nuts and washers etc and painting with primer and finished paint as required

Providing and erection of galvanised stay set for 11kV overhead lines complete with 19 mm rod dia. with plate30x30x0.8cm, 7/12SWG G.I. stay wire,11kV guy insulator (140x85mm) and stay bowin cement concrete 1:3:6(1cement :3 coarse sand : 6 graded stone aggregate) foundation including excavation and refilling etc

Providing and Erection of 11kV outdoor type CT & PT metering equipment with PT ratio 11/0.110 kV, Class 0.2s, CT ratio as per requirement ; with 3-ph 4 wire Automatic Meter Reading (AMR) Compatible Static Trivector meter in separate Housing cabine t with cables & accessories (Boundary Meter),

Providing & Fixing of Wedge Connectors / PG Clamps as required

Providing & Fixing of Danger Plates with Clamps as required

Providing & Fixing of Anti Climbing device with Clamps as required

Providing, laying and stringing of 11kV line per circuit meter using Weasel conductors with jungle clearance, as required

Providing of Stone Pad 300 mmx300mmx75mm as required

Fabricating , Supplying,Installation,Testing and Commissioning of 7.00 Mtr long street light pole made out of 75 mm dia Medium Class G.I Pipe having 300mm x 300mm x 8mm thick MS base plate duly welded to the bottom with a tapering collar of suitable dimension to fit and match the pole with lighting fixtures complete job. (As per approved sample)

Providing cement concrete foundation including excavation for the poles (45 cm x 45 cm x 75 cm) in 1:3:6 mix (1 cement : coarse sand : stone aggregate 25 mm size) duly plastered and finishing in an approved manner with necessary curing. Job includes provisding and grouting of 4 Nos. 20mm dia 200 mm long J-type foundation bolts and errection of pre-fabricated street light pole on these bolts and tightening with nuts as required. complete job.

Supplying and fixing of junction box with suitable clamp etc. alongwith supplying and fixing of 01 No. SMC connector, 1 no. 6 Amp SP MCB mounted on DIN rail, clamps connections etc. as required. complete job.

Supplying installation, testing and commissioning of LED new Generation, post-top, energy saving environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminum landscape luminarie with high power LED's as light sources of minium watts as required as per approved make complete job.

Wiring for circuit wiring with 2 X 4 sq. mm + 1 X 4 sq. mm earth of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

Providing and Fitting of Aluminium cable of per meter length, 2 core, 16 sq.mm conforming to IS : 1554-1 (1988) or any ammendments as required complete job. as required

Measurable quantitiesmay vary at the time of actual execution of the work and shall be allowed as per actual with in the estimated cost.

CONTINENTAL ENTERPRISES (BID ID -2541938)

ANCHAL ASSOCIATES (BID ID -2541747)