INSTALATION AND ENERGISATION OF SIMILIPUR-II LI PROJECT

Amount

CIVIL AND MATERIALS ITEMS

Earth work in hard soil for excavation of foundation including dressing and levlling the bed and depositing the soil within 50 mtr. initial lead and 1.5 mtr. initial lift as per direction of Engineer-in-charge.

Filling in foundation and plinth with sand watered and rammed including cost of sand as per direction of Engineer-in-charge.

Cement concrete (1:4:8) with 4 cm size h.g. metal as per direction of Engineer-in-charge.

Ist Class K.B.Brick (25cm x 12 cm x 8 cm ) having crushing strength not less than 75kg./cm2 with dimensional tolerance + 8% in cement mortar (1:6) in foundation and plinth.

CC(1:2:4) in foundation and plinth

Cement concrete (1:2:4) with 12mm size h.g chips for R.C.C. works including hoisting and laying.

Rigid smooth centering and shuttering for R.C.C. works including false work and dismentling them after casting including cost of materials complete in roof slab & Chajja. .

Labour cost for cutting, bending and binding of M. S. rod placing in position including cost of M. S. rod.Qty. @ 0.9% of R. C. C. work or 1.40qtl @ 78 qtl / cum

12mm thick cement plaster (1:6) for brick masonary

Cement Punning

Labour charges for lettering the display board in black colour , yellow back ground painting including the cost of materials.

Filling F & P with excavated materials including watering and ramming as directed by the Engineer-in-charge.

Labour charges for laying and jointing of 200mm dia PVC Pipe including carriage from stacking yard to site.

Provision for M. S. bolt for foundation 4 nos and MS hook for handling of FF

Dismantling of Lime Concrete, cement concrete grade M-10 and below including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres Unit = cum

Cost of labour charges for installation of MB Pumpset, fitting of suction and delivery GI pipe , GI fittings ,base plate, cutting and threading of GI pipe , NRV,SV, welding including cost of petty materials required for fitting & energisation

Cost of laying and fitting of MS Tee and other PVC fitthing along the pipe line.

Extra labour and materials required for fitting and fixing of 25mm dia GI pipe for 50mm dia CI Air release valve at the sutable location of PVC pipe inside the air realease chamber including cost of petty materials.

Electrical earthing with the help of 1½" GI pipe 2 Nos including all labour and materials required such as GI wire , GI socket , Charcoal, Salt, small size nut and bolts and all other materials required including excavation of earth pit and fitting thereoff complete.

10 H.P.Monoblock Pump set ( BEE STAR Lebeled Energy efficient ) coupled with totally enclosed squirrel cage induction motor with delivery discharge 1700 LPM at 18 mtrs. Head with cable, cable clip, support clamp etc. suitable for operation at 415+6% ,-15% volt,3 phase ,50 Hz, AC power supply with ISI mark and guarantee . The materials of construction as given below. (a) Motor casing.. stainless steel AISI 304 (b) Impeller ... bronze (c) Pump shaft... stainless steel (d) Sand guard...... bronze. (e) Non-return valve... CIFG 200.

Automatic star-delta starter sheet steel enclosure suitable for operation of squirrel cage induction motors upto 15 HP having full load current of 16 Amp. At 415 V + 6% - 15% , 3 phase, 50 Hz,Ac supply with over load relay range 13.5 - 20 Amp and No Volt coil suitable for operation at voltage range of 350 - 440 V. The starter should provide depenmdable protection against overload and single phasing of reputed brand having wide dealership network for easy availoability of spares with ISI mark and guarantee.

Main Switch 63 Amp including fitting and fixing as per IS No.-4064(Part-I & II) with utilisation capacity category AC-22.

3 ph. 4 wire 20 - 100 Amp. 3 x 230 Volt (P-N) current meter with ISI mark as approved by DISTCO,CESU with matching fibre glass with T.P Box(M.S)

Empty Panel Board

4 KVAR Capacitor

3 x 10 sqmm Trapoder cable XLPE (Cross link polyethylin ) including laying below the ground and filling the excavated materials including watering and ramming with ISI mark and guarantee.

Motor hood cover made with18gaugeCR sheet

Motor Base plate made with MS channels

100mm dia nominal bore G.I.Pipe having wall thickness 4.5mm electrical resistance welded of medium class conforming to IS - 1239 (part-I/2004) with latest Amendments,screwed at both ends as per IS -554 socketed at one end and the other end protected with plastic threaded protector. The socket conforming to IS:1239 (Part-II/1992) with latest Amendments in random length of 4 to 7 mtrs. Each pipe should bear ISI Certification and manufacturers name/trademark , for fitting in Suction & Delivery Pipes.

100 mm dia C.I.Reflux valve(N.R)

100 mm dia C.I.Sluice valve

100 mm dia GI Bend

100 mm dia GI Flange

100 mm dia CI Foot Valve

200mm dia PVC end cap

Unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6(six) meter for portable water supplies conforming to IS - 4985 / 2000 of BIS - Amendment - 2 read with Table-1 of IS - specification bearing ISI marks for working pressure Cl-II UPVC pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest Amendment of IS-4985. It includes the cost of sockets in case of plain ended pipe. PDI test are to be conducted and should be marked on body of each pipe and report is to be obtained from CIPET, Bhubaneswar / EPM., Orissa, Bhubaneswar for necessary approval of authority including transportation and laying at site all complete. (i) 200 mm dia P.V.C. Pipe.

200X200X100mm dia M.S outlet Tee made with 201mm ID and 216 mm OD M.S Pipe of 8mm thick 400mm long fitted with 1 mtr long 100mm dia M.S.Pipe welded with 2 nos of 100mm dia M.S.Flange in between the 1 mtr M.S.Pipe and 0.25 mtr long 100 mm dia M.S.Pipe fitted horizentally with 2 mtrs of 100mm dia M.S.Elbow with water locking arrangement made out of 1 no. of 100mm dia open flange and 1 no. of 100mm dia blind flange and with hinges gaskets arrangement that UPVC pipe should be inserted directly 100mm long inside the 201mm dia ID M.S.Pipe at the both ends painted with two coats of anti corosive paints in complete set.

200 mm dia PVC Equal Tee

200 mm dia PVC bend

Solvent Cement

Cost of 50 mm Ø Air release valve with acessories

250mm dia MS pipe

250mm dia PVC CL I pipe

250mm PVC bend

200mm dia PVC coupler

250mm dia PVC coupler

200mm dia butterfly valve

250x250x200 mm PVC Tee

250mm dia MS flange

250mm dia PVC end cap

250x100 mm dia MS reducer

100x100x63mm GI Tee for priming

250 mm X250mmX100mm dia MS Tee with closing arrangement.

ELECTRICAL ITEM

Construction of 3 phase 11 KV line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with 55 Sqmm AAAC , 11 KV "V" Cross arm, with required No.of 11 KV T & C Disc. Insulators in tension point & 11 KV Pin insulators, Couping & Padding of Poles. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, guarding at Road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete.

Construction and erection of 11 /0.4 KV , 63 KVA Double Pole mounted Substation Star rated confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm M.S.Channel, Transformer belting on 2.80 M long 50 X 50 X 5 mm M.S.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75 X 40 X 6 mm M.S.Channel and supported by 1.0 M long 50 X 50 X 5 mm M.S.Angle, with 3 No. 11 KV Lightening Arrestors & Distribution box for 25 KVA S/S, G.I.pipe earthing with 25X5mm G.I.Flats including cost of 25 KVA 11/0.4 K.V.Transformer , 35 Sqmm 3 1/2 Core PVC Cable - 40 mtr couping & padding of Poles, Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of RCC fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning.

Consturction of 3 Phase L.T.line as per REC standard confirming to RE rule 1956 with 200Kg BM long PSC pole support in 0.40M span with 3x35mm² +1x25 mm ² LT x LPE AB cable with coil earthing device, LT dead end clam, Suspension clamp with I hook , stay accessories such as wire insulator , clamp etc. nut bolts, alonwith concreting of poles and stay as per direction of Engineer in Charge.

SUBASH KUMAR BEHERA