Renewal of Pharenda Brijmanganj Militry Camp Inayatnagar chauraha to station road by Departmental HMP Lot 101 of 179

WBM Grading-3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per PWD Specification & Clause No. 405 & 4.7 (iii) (A) By Manual Means complete in all respect as per directions of Engineer-in-charge (Including Labour Cess but GST will be paid extra as per applicable)

Tack Coat Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 & S.No. 5.2(ii) (Including Cost of Bitumen & Labour Cess but GST will be paid extra as per applicable)

20mm. Thick open-graded premix carpet Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per Technical Specification Clause 508 Case -II & S.No. 509 By Mechanical Means (I) Bitumen (S-90) complete in all respect as per directions of Engineer-in-charge (Including cost of Bitumen & Labour Cess but GST will be paid extra as per applicable) (Excluding Cost of all machinery)

Seal Coat Type 'C' Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 B & S.No. 5.12 By Mechanical Means Case - III : Type C (I) Bitumen (S-90) complete in all respect as per directions of Engineer-in-charge (Including cost of Bitumen & Labour Cess but GST will be paid extra as per applicable) (Excluding Cost of all machinery)

Please Enable Macros to View BoQ information