Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.1 LAccepted-AOC PO PS JANG DISTRICT TAWANG ARUNACHAL PRADESH 790104 | JANG | TAWANG | ARUNACHAL PRADESH | 790104 | L1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L2₹21.5 L+₹4.4 L (25.9%)Rejected-Finance SHAMSHU COMPLEX FORT ROAD LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L2 | Rejected-Finance higher side quoted amount | |
| 3 | L3₹23.2 L+₹6.1 L (35.8%)Rejected-Finance | L3 | Rejected-Finance higher side quoted amount | |
| 4 | L4₹23.5 L+₹6.5 L (37.8%)Rejected-Finance | L4 | Rejected-Finance higher side quoted amount | |
| 5 | L5₹24.6 L+₹7.6 L (44.4%)Rejected-Finance | L5 | Rejected-Finance higher side quoted amount |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
19 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
HQ CWE Khumbathang
REPAIR/REPLACEMENT OF FENCING, FOOTPATH AND BOUNDARY WALL WORKS AT NIMU STATION UNDER AGE (I) NIMU
2023_MES_611004_1
80051/31/E8
Open Tender
Civil Works
Item Rate
180 days
AGE(I) NIMU
Class E, Cat a (i)
8 documents required · 8 mandatory
₹500
AGE (I) Nimu
₹40,000
Yes
27 Sept 2023
28 Jul 2023
21 Aug 2023
28 Jul 2023
19 Aug 2023
12 Aug 2023
Amount
Dismantling fencing wire mesh, any type complete all as specified and directed by Engr-in-Charge.
Supply only of MS galvnised steel wire of mesh any size or type made up into matteress or cages,lapped wired and laid in position including closing after filling including fixing to steel post by welding etc complete all as specified and directed by Engr-in-Charge. Note:- Weight of wire mess will be decided by BOO conveyed by AGE(I) Nimu
Supply and fixing in repair of barbed wire, galvnised,2 stand steel 2.24mm dia barbed with 2mm dia barb with wire 75mm spacing and straining and fixing to any type of standard rails straing bolts including ,securing or tying at crossing with and provision of galvanised mild steel wire,staples or steel pin etc and complete all as specified and directed by Engr-in-Charge.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground.(Posts embedded in natural ground) complete all as specified and directed by Engr-in-Charge.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground.(Posts embedded in concrete, brick work, masonry etc) complete all as specified and directed by Engr-in-Charge.
Exavation in post holes in hard/dence soil (for similar holes) each n.exc 0.5 cum, getting out, returning,filling in and remming each of broken rubble mixed with earth aroundin layers not exc 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed by Engr-in-Charge.
Cement concrete PCC 1:2:4 type B2 using 40mm graded crushed stone agg as in fdn/ sub base of posts complete all as specified and directed by Engr-in-Charge.
S&F Mild steel work in posts and struts in fencing including cutting tops to shape as directed ,drilling holes notching for wire etc, flat iron fillets for securing wire mesh/chain link fencing /barbed wire fencingincluding all necessary welding, drilling, bolting or riveting etc and similar work and providing MS flat for welding of GI mesh to posts or struts complete all as specified and directed by Engr-in-Charge.
S&F Mild steel work in nut,washer,bolt conforming to Fe290 Gde-E-165 complete all as specified and directed by Engr-in-Charge.
Supply and fixing mild steel round bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia ,or securing with clips of Fe-410W(Gde.E250) quality -A or Fe290(Gde-E-165) complete all as specified and directed by Engr-in-Charge.
Prepration of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer n.exc. 10 cm complete all as specified and directed by Engr-in-Charge.
Preparation of surfaces and applying two coats of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10 cm width/girth including filling with filler where reqd complete all as specified and directed by Engr-in-Charge.
M & L for treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and directed by Engr-in-Charge.
Cement Concrete , 1:2:4, type B-1 using 20mm graded agg as in lintel upto 1.50 m span, cills, steps, seismic and other silmilar bands, plinth courses, sring courses,lacing courses, parapets and railings upt 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troghs and the like including weathering, slightly rounded or camphered angles and throating, complete all as specified and directed by Engr-in-Charge.
Demolition of concrete (PCC) of any description and in any position not otherwise specifically provided for Cement concrete (unreinforced) complete all as specified and directed by Engr-in-Charge.
M&L for 25mm thick Sand filling (crushed sand) under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.
M&L for Machine pressed precast conctete interlocking paver block 60mm thick any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed by Engr-in-Charge.
M&L for chequered cement concrte tile 25x25x25mm/ 30x30x25 mm thick with grey cement and pigment confirming jointed and pointed in neat cement slurry in floor complete all as specified and directed by Engr-in-Charge.
M & L 25mm thick Cement concrete 1:2:4, type B-1 (using 20mm graded aggregate) as in topping layer finished surface even and fair complete all as specified and directed by Engr-in-Charge.
M & L 75mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in fdn and subbase to received top layer complete all as specified and directed by Engr-in-Charge.
Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, etc complete all as specified and directed by Engr-in-Charge.
M&L for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate ) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:6 complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster of any description complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 12mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.
Preparing new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 50,065.00 and any other reduction if any from quoted amount.
M/S INDUS HIMALAYAN EXPLORERS
TSEWANG DORJAY
CHHIRPON BUILDERS
Takshos Enterprises
M/S TSERING ANGCHOK
M/S LOBZANG NORBOO
M/S SONAM NAMGIAL
M/S Deldan Namgail
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .