Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹48.5 L
EMD Value
₹96,900
Closing Date
22 Oct 2026, 6:55 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE (East) Agra
Garrison Engineer (East) Agra, Military Engineer Services, Gwalior House, 62 Taj Road Agra Cantt-282001
SPECIAL REPAIR TO BLDG NO. T-8 OF 509 ARMY BASE WKSP UNDER GE (EAST) AGRA
2026_MES_792161_1
9942/E8
Open Tender
Civil Works
Item Rate
180 days
Agra Cantt
Please refer tender documents
10 documents required · 10 mandatory
₹500
Yes
GE (East) Agra
₹96,900
Yes
1 Oct 2026
1 Oct 2026
30 Oct 2026
1 Oct 2026
22 Oct 2026
15 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed. | 760 | Sqm | - | - |
| 2 | S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. | 670 | Sqm | - | - |
| 3 | S&F of Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. | 60 | Sqm | - | - |
| 4 | S&F Pre-painted, galvanized, pre-fabricated PPGI sheeting 1.25 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including all fixing arrangement etc. complete all as specified and directed | 30 | Sqm | - | - |
| 5 | M&L for Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 etc complete all as specified and directed. | 60 | RM | - | - |
| 6 | S&F Rough Cast wired Figured glass 6.4 mm thick and glazing with oil putty in squares exceeding 0.5 Sq. M but not 0.75 sqm in each pane upto height 9 m from GL including hacking out old/ broken glass etc complete all as specified and directed. | 30 | Sqm | - | - |
| 7 | M&L for two coats of synthetic enamel paint (Ordinary tint) over red oxide zinc primer including preparation of old surfaces of steel of any description not otherwise described over 10 cm in width or girth complete all as specified and directed. | 20 | Sqm | - | - |
| 8 | Dismantling wall and ceiling board or insulation board /slabs/blanket any thickness including cover fillets etc complete all as specified & directed. | 600 | Sqm | - | - |
| 9 | S&F in repair 605x605mm snap grid of powder coated galvanized iron of angle of size 23mm x 23mm of 30 gauge (Perimeter), T section of size 23mm x35mm main and 23mm x 27 mm (intermediate) of 30 gauge suitable for false ceiling including GI wire 6 mm thick @ 1200 mm centre to centre both ways for hanging arragement complete all as specified and directed. | 600 | Sqm | - | - |
| 10 | M&L for 4 mm thick non asbestos fibre cement building board designer as in ceiling of size 600 x 600mm fixed to GI snap grid frame work complete all as specified & directed. | 600 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
Tender9942.pdf
Tender Documents • 0.84 MB
PS9942.pdf
Additional Documents • 0.81 MB
BOQ_888192.xls
BOQ • 0.56 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .