Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-Finance | ₹3.6 L | L1 | Accepted-Finance due to lowest 1st |
| 2 | L2₹3.9 L+₹23,743.42 (6.56%)Accepted-Finance | ₹3.9 L+₹23,743.42 (6.56%) | L2 | Accepted-Finance due to,lowest 2nd |
| 3 | L3₹4.9 L+₹1.2 L (34.2%)Accepted-Finance | ₹4.9 L+₹1.2 L (34.2%) | L3 | Accepted-Finance due to lowest 3rd |
Tender Value
₹4.8 L
EMD Value
₹9,516
Closing Date
14 Aug 2026, 6:00 pmClosed
Commissioner
Municipal board mount abu
ARC OF MOTORS IN MUINCIPAL BOARD MOUNT ABU
2026_DLB_583973_1
3098-3100 (2)
Open Tender
Electrical Works
Percentage
365 days
Municipal board mount abu
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Yes
Commissioner
₹9,516
Yes
19 Aug 2026
7 Aug 2026
15 Aug 2026
7 Aug 2026
14 Aug 2026
7 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart and made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. suitable for following rating motors complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .2.0 HP to 3.0 HP (DOL starter) | 15 | EACH | 5,541 | ₹83,115 |
| 2 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. 6.0 Sq.mm 3 core flat / Round | 300 | MTR | 308 | ₹92,400 |
| 3 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths full round HDPE DWC (double wall corrugated) pipes of SN8 grade as per IS 16098 (Part 2) amended upto date in trenches in complete including all material, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications, drawings and as per direction of Engineer. Note : E/w to be measured and paid separately. Length of pipe shall be measured in between the outer wall of two manholes / Inspection chambers. Pipe in the manhole/inspection chamber’s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable.150 mm ID | 400 | MTR | 429.5 | ₹1,71,800 |
| 4 | Rewinding of single phase motor of 1400 RPM including all necessary material and of the same characteristics as original with
required size of super enamelled wire 'E' class insulation material
and testing etc. as required. Replacement of material or components
shall be use as per guidelines of OEM of original product. All the
scrap material should be retained by the contractor. 2.0 H.P. | 15 | EACH | 2,125 | ₹31,875 |
| 5 | Rewinding of single phase/3phase submersible motor including all necessary material and of the same characteristics as original with required size of super enamelled wire 'E' class insulation material and testing etc. as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor.2.0 H.P.to 3.0 HP | 15 | EACH | 6,442 | ₹96,630 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.75 MB
BOQ_1037209.xls
BOQ • 0.25 MB
corrigendum.pdf
PDF • 0.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .