Beautification work of entry gate at Jolhupur Chauraha on Hamirpur Kalpi road (SH-91)

12mm cement plaster on rough side of mix 1:3 (1 cement: 4 coarse sand) as per DSR No-13.1.1 including cost of all material , labour, T&P and all taxes. but excluding cost of GST.

Extra for plastering done on moulding, cornices or architraves including neat finish to line and level: In two coats as per DSR No- 13.24.2 including cost of all material , labour, T&P and all taxes. but excluding cost of GST.

Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). as per DSR No- 8.1.1.2 including cost of all material , labour, T&P and all taxes. but excluding cost of GST.

Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) as per DSR No- 13.46.1 New work including cost of all material , labour, T&P and all taxes. but excluding cost of GST.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a erviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. as per DSR No- 14.72 including cost of all material , labour, T&P and all taxes. but excluding cost of GST.

Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-67:2012 retro reflective sheeting with back frame MS angle of 35x35x5 mm. Legends, letters, numerals and borders etc should be as per MoRTH specification No-801.3.7 The sheeting shall have a pressure - sensitive adhesive of the aggressive - tack type requiring no heat solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting. Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shall be Pressure fixed. as per LKO Sor no- 10 ch-26 including cost of all material , labour, T&P and all taxes. but excluding cost of GST.