AUDITORIUM

Amount

Supplying fittings and fixing Marble Slab / tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm ( av.) thick base of Cement mortar ( 1:2 ) laid with white Cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineer - in - Charge in Ground Floor. [ White cement and Pigment to be supplied by the Agency ] (b) With Chawk Dungri (ii) Area of each tile upto 0.3 Sq.m.

Supplying , fitting, & fixing in position suspended false celling with frame work of aluminium hollow section of size 50 mm x 25 mm ( 2.0 mm thickness) combined with aluminium corners of size 38 mm x 25 mm, suspended by aluminium hollow tube section of size 38 mm x 25 mm having size of 600 mm x 600 mm celling with aluminium composit pannels ( ACP) - Interior grade of thickness 3.0 mm comprising of proctective film, polyester coating, primer, aluminium coil , adhesive film, polyethylene core again with one layer adhesive film aluminium bottom coating and finally service coating as per manufacturer's specification finished with aluminium screw and silicon sealent complete in all respect including all incidental charges etc.as per direction of Engineer - in - charge.

Providing false Ceilling made with framework of steel tube of 40 mm x 20 mm of not less than 18 gauge, the long and cross section will be welded with each other 1000 mm to 1200 mm apart the entire framework will be fixed inb wall using rawlplug of gutties or screws etc. and suspended from ceiling with M.S. flat 19mm x 3 mm as necessary, the entire frame will be painted with red oxide. PRINTED LAMINATED P.V.C Section 150mm x 12mm x 1.00mm ( +/-0.01mm) of approved quality and colour will be fixed on the frame so that the entire framework will not be visible from below P.V.C Section will be fixed with the frame with the help of self tapping steel screws including all materials and labour charges including fitting, fixing the same and hoisting including mending the damages in all respect and cost of paint as required as per direction of Engineer -in-Charge

Supplying , fitting and fixing boiling water proof ply conforming to IS : 710 - 1977 bonded with phenol for maldehyde synthetic resinconforming to IS : 848 - 1974 of approved make and brand fitted and fixed as per design as per approval amd direction of Engineer-teak wood batten / Lipping ] 6 mm thick.

Supplying and fixing sheet steel Main Switches on flat iron frame on wall 30/32 A Havells 240 V DP with fuse on L&N

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection . Semens 40A, DP.

Supplying & fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes ( for ph, N & E ) fixed on bakelight/ Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.

a) 6 Module

b) 12 Module

Supply & Installation of 2 Ton Hitachi make split A.C.

Supply & fitting of Bracket Fan

Supply of 250 Volts single phase AC 920 RPM,300 mm sweep exhaust fan ( EPC make )

Supply ,fitting & fixing 18 W spot light

Providing and fixing Audio System of JBL EON one pro linear array portable PA - System with battery

LABANYA SARKAR

RAJAN INFRATEC PVT. LTD.