GE S U 08 2022 23 CONSTRUCTION OF SENTRY POST AND SPECIAL REPAIR TO SECURITY WALL UNDER GE SOUTH UDHAMPUR

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, & n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per item No 04 but except bricks complete all as specified and as directed.

Returning, filling including spreading leveling watering and well ramming in layers not exceeding 25mm in any type of soil complete all as specified and as directed.

Removing excavated material (soils) exceeding 250 m but n.exc. 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in foundations, including rafts, footings, foundation, beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in columns, pillars, piers,posts and struts complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in chajjas complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter for rough flat finished surfaces of concrete complete all as specified and as directed.

Formwork to sides of pillars,posts, struts, piers, columns and stanchions for rough flat finished surface of concrete complete all as specified and as directed.

Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams complete all as specified and as directed.

Formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

Formwork to chullah hoods, chajjas,troughs and similar items including edges for rough flat finished surface of concrete complete all as specified and as directed.

TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

All as per srl item No. 19 above but 5mm dia and over including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed.

Rendering 10 mm thick on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 15 mm thick in two layers (10mm + 5mm) on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete with water proofing compound complete all as specified and as directed. (WPC shall be measured separtely).

Supply only Liquid water proofing compound complete all as specified and as directed.

Rendering 05 mm thick CM 1:4 on fair surfaces of ceiling work and finished even and smooth without using extra cement complete all as specified and as directed.

15 mm to 18 mm thick granite stone slab as in shelves/vertical surfaces/platforms set and jointed in neat cement slurry, pointed in colored cement to match the shade including rubbing of moulding etc. complete all as specified and as directed.

Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash.complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant priming paint complete all as specified and as directed.

Preparation of new plastered surface and applying two coats of apex ultima paint over a coat of primer incl preparation of surfaces complete all as specified and as directed. (colour of apex ultima as approved by GE.

Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and as directed.

75 mm thick cement concrete (1:4:8) type D-2 as in sub base to floor complete all as specified and as directed.

25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified and as directed.

10mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Non-skid coloured ceramic tiles (square/ rectangular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

50 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 sqm each) area with 6mm wide joints and 10mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

Mild steel Ventilators (Box type) factory made with top hung shutters and bottom fixed type shutters incl pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded incl one shop coat of red oxide primer complete all as specified and as directed. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe-290.Gde-E-165 quality A including one shop coat of zinc chromate primer paint including preparation of surfaces at contractor's workshop before fabrication complete all as specified and as directed.

Aluminium alloy wire cloth, 0.45 mm nominal dia of wire & average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and as directed.

4 mm thick glass sheet of frosted ordinary quality n exc 0.5 Sqm in each pane complete all as specified and as directed.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Pressed steel frames size 105x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. as in repair complete all as specified and as directed.

40mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Aluminum handles cast type, anodised, 150 mm size complete all as specified and as directed.

Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and as directed.

Mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed.

Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor complete all as specified and as directed.

Demolition of brick or stone masonary including all necessary arches, pillars, quions etc built in cement mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Demolition of reinforcement cement concrete of any description and any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling old serviceable/unserviceable barbed wire including removing of unserviceable barbed wire from site and serviceable materials kept in safe custody for re-use complete all as specified and as directed.

Excavation over areas not exceeding 1.5 m deep and getting out as in soft/loose soil complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Boulder pitching grouted with cement and sand mortar 1:6 hand packed tightely complete all as specified and as directed.

Framed work as in doors or gates of angle or tubular section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with or including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. Fe 410 - (Gde- E- 250) complete all as specified and as directed.

20mm thick granite (of any type ) work (table rubbed and polished) in pillars and likes in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

Cement concrete (1:2:4) type B-2 (using 40mm graded crushed stone aggregates) as in foundation, filling, sub base and mass concrete including necessary form work complete all as specified and as directed.

Broken glass coping in cement mortar 1:3 on top of walls complete all as specified and as directed.

Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars and similar work conforming to E-250 complete all as specified and as directed.

Mild steel conforming to grade Fe-165 (Fe-290) angle post or struts in fencing fixed independently including cutting and bending to shape as directed drilling holes, notching for wire etc. complete all as specified and as directed.

Applying two coats of cement based paint over a coat of chalk whiting including preparation of new/old plastered surfaces complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide chrome primer complete all as specified and as directed.

Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of post including securing and tying at crossing with and provision of galvanised mild steel wire staple or steel pins etc complete all as specified and as directed. (Each line wire to be mesured)

Reinforced concrete pipes, class NP-2 (150mm), laid and jointed complete with collars complete all as specified and as directed.

Supply & fixing punched tape concertina coil (including spike and handle) with 50 turns and 1050mm dia, width of barbed 9mm dia and spacing of clips 23.5mm to 24.5mm c/c weight of coil will be 10 to 14 kg without packing. Coil length will be 6m when opened up etc complete all as specified and as directed

Two coats of weather proof exterior emulsion paint including preparation of new/old plastered surfaces of any description and applying 01 mm thick layer of wall putty on walls to give uniform surface complete all as specified and as directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish complete all as specified and as directed.

All as per srl item No 68 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per srl item No 68 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 68 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.

Modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and as directed.

Modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and as directed.

Modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and as directed.

Modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with inner and outer cover strip required module complete all as specified and as directed.

Ceiling rose, surface bakelite 65mm x 50mm two to three terminals fixed on PVC Round Block complete all as specified and as directed.

Sheet metal enclosure double door type for DBs (when MCB to be used) 4 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed.

MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA inculding providing thimble for out going cable complete all as specified and as directed.

MCB single pole and neutral 240 volt any rating from 40 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed.

Supply and Fixing wall fan 300mm swing complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 230V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Material & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 06 Sqmm x 2 core size all as specified including taking down old cable complete all as specified and as directed. Note : Earth work and other connected work shall be measured & paid sperately.

Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and as directed. Note : for payment purpose punned thickness shall be measured

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and as directed.

Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and as directed.

khajuria builders

shivom builders

KALSOTRA CONSTRUCTION CO

joginder singh and sons

RAMAN CONSTRUCTION CO

R K BUILDERS