SPECIAL REPAIR OF TOILET IN BLDG NO CB 248 UNDER GE M INF SCHOOL MHOW

Amount

Dismantling floor,hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

Demolition of cement concrete (unreinforced ) in ground floors and paving n exc 15 cm thickness (below or above ground level) etc complete all as specified and directed.

Demolition of brick work built in cement mortar in any discription etc complete all as specified and directed.

M/L Cement concrete 1:2:4 type B1 (using 20mm gd aggregate) as in roof kerbs benching on chajja & haunching or leveling course etc complete all as specified and directed.

M&L for fly ash modular size sub class B bricks straight or curved on plan exc 6 m mean radius built in CM (1:6 ) etc complete all as specified and directed.

M&L for fly ash modular size sub class B bricks straight or curved on plan to any radius in half brick lthick wall work built in CM (1:4 ) complete all as specified and directed.

M & L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

S&F Glazed coloured ceramic tiles 7 to 8 mm thick square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in vertical surface such as skirting dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cm 1:4 etc complete all as specified and as directed.

Taking down chowkats or frames with shutters without taking down shutters from frame n exc 1.5 Sqm complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 sqm each and removing etc complete all as specified and directed.

S&F factory made solid laminated PVC door shuter 30mm thick ( style ) consiting of frame made out of M.S. tube for top and bottom rails, M S frame shall be coverded with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and pain colour PVC etc top rail, lock rail & bottom rail on either side & as gape insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame lded / sealed to the stils &rails with suitable PVC sheet beading and jointed together with solvent cement and fix in frame at site asspecification & drawing given in SSR 2010.

S & F of laminated PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F 125mm extruded aluminium alloy handle, fabricated type anodisedetc complete all as specified and directed.

S & F mild steel butt hinges 100mm size cold rolled medium weight and fixed as directed and specified.

S & F Extruded aluminium alloy handles fabricated type anodised 150mm size as specified & directed

S&F 150mm aluminium, anodised barrel tower bolts of extruded section etc complete all as specified and directed.

M & L for second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, unded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L for 30 mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed t etc complete all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel, 150 mm size etc complete all as specified and directed.

S&F Galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying two coat of synthetic enamel paint etc complete all as specified and directed.

Preparing new wooden surfaces of wood and wood based materials of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over primer etc complete.

Preparing new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a red oxide etc complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for refixing etc complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for refixing etc complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in foor etc complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M & L 5 mm thick rendering in cement mortar 1:3 on ceiling or concrete surface over surface finished even and smooth without using extra cement complete all as specified and directed.

M & L 10 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and fair complete all as specified and directed.

M & L 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surface of wall in cement mortar 1:6, surface finished even and smooth without using extra cement complete all as specified and directed.

M & L applying newly plastered surface three coat of white wash on ceiling complete all as specified and directed.

M & L newly palstered surface applying two coats of oil bound distemper over a coat of primer including preparation of plastered surfaces complete all as specified and directed.

M & L old palstered surface applying one coats of oil bound distemper over a coat of primer including preparation of plastered surfaces complete all as specified and directed.

M & L applying one coats of cement based paint on old wall surfaces including preparation of surfaces complete all as specified and directed.

M&L Preparation of old decorated surface of wall and ceiling incl cornices pilaster etc by scraping with wire brush and removing existing loose finishes/particles and applying one coat of white wash on wall/Ceilings all as specified and directed.

M&L for water proofing treatment to non accessible flat roofs and edge ( vertical or tapered ) etc. on followingsaquence- (1) proparly cleaning and dry surface (2) applying a coat of bitumen primer @ 0.3kg/Sqm (3) laying 3mm thick APP modified water proofing membrene with 100mm overlaps sealed and bonded to the surface by torchone method (4) Applying a coat bituminous paint @ 200gm /Sqm ( in two coats of 100 gm each ) concrete complete all as specified and directed

Supply only Liquid Water proofing compound of Make : PIDIPROOF ( Dr FIXIT ) or equivalent as approved by GE.

Hacking out old broken glass ( any thikness size quility or description ) frome wooden frames or stone concrete or brick surrounds glazed with putty or fixed with beads etc complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quility and glazed with oil putty in squre n exc 0.50 sqm in each pane etc complete all as specified and directed.

S&F in repairs 15mm bore CP bib taps with crutch handle, screwed down screwed for iron pipe or for brass ferruile and fixed etc complete all as specified and directed.

S&F in repair 15mm bore CP pillar taps cast copper alloy with capstone heads screw down high pressure with or without letterd Hot or cold with long screwed hanks and fly nuts screwed for iron pipe etc complete all as specified and directed.

S & F in repair brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in repaires 15mm bore CP fancy type ( concealed type ) stop cock cost copper alloy screwed down high pressure with cruth or butterfly handle screwed both ends for iron pipe or union and fixed. With long shanks and cup washer etc complete all as specified and directed.

S & F in repairs vitreous china squatting pan "Orissa" pattern , size 580mm x 440mm white ,with integral foot rests (excluding flushing cistern & flush pipe) including CI 'P' trap of 100 mm bore ,and conection to trap and to flushing pipe ,anti-syphonage pipe etc .complete including making good to floor etc complete all as specified and directed.

S&F in repair 15mm bore PVC connections with PTMT nuts of 450mm length etc complete all as specified and directed.

S&F in repair 10 ltrs capacity PVC low level flushing cistern including flush pipe etc complete all as specified and directed.

S&F in repair 15mm bore CP shower fancy type etc complete all as specified and directed.

S&F in repaire CP towel rail 600mm long etc complete all as specified and directed.

S & F in repair PVC (SWR) pipe size 75 mm bore single socketed in any length with rubber ring, fixed on wall complete all as specified and directed.

S & F in repair PVC (SWR) pipe size 110 mm bore single socketed in any length with rubber ring, fixed on wall complete all as specified and directed.

S & F in repair PVC (SWR) pipe size 75 mm bore single socketed in any length with rubber ring,joints laid in trenches complete all as specified and directed.

S & F in repair PVC (SWR) pipe size 110 mm bore single socketed in any length with rubber ring,joints laid in trenches complete all as specified and directed.

S & F in repair PVC (SWR) bend, 'T' socket reducer size 75 mm bore etc complete all as specified and directed.

S & F in repair PVC (SWR) bend,'T' socket reducer size 110 mm bore etc complete all as specified and directed.

S & F in repair PVC (SWR) reducers 110 including taking down existing unserviceable reducers complete all as specified and directed.

S & F repairs vitreous china wash hand basin white, flat back of size 550mm x 400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete. (Note :- Pillar tap shall be measured as supply only under respective item)

S&F sheet glass shelf assembly consisting of 5.50 mm thick glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and directed.

S&F cast iron NT trap with grating including jointing to waste pipe in cement mortar dia of outlet 100mm etc complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank capacity 1000 Ltr triple layer, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 including 20 mm dia GI pipe light grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade over flow pipe 600 mm long with fitting and dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

S & F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 142 gms), complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

M & L for repair to sunken floor by provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications as specified and directed :-(a) Provide PCC 1 : 1.5 : 3 type A with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or equivalent as approved, finish the surface even & smooth without using extra cement complete all as specified.

M&L Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sides of sunken portion complete all as specified and directed.

M&L Apply Dr Fixit proofcote black heavy duty bituminous elastomeric waterproof coat inf in two coats of sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc including demolation of old sunken complete all as specified and as directed. (Note : Floor Area shall be measured for payment).

M&L for PCC 1:5:10 Type D2 using 40mm graded stone aggregate as in sunken filling and other similar work complete all as specified and as directed

S&F stainless steel soap nich of suitable size and fixed to walls etc compete all as specified and directed.

M & L for salt glazed stoneware pipe 150 mm internal dia, grade 'A' confirming to IS, laid in trenches and jointed with cement mortar and testing compete all as specified and directed.

M & L for precast cement concrete coverslab for man holes type 1:2:4 type B-1 mix set cement mortar 1:4 incl necessary form work complete as specified and directed.

M&L for TMT bars 10 mm dia and over cut to length, bent to shape required incl cranking, hooking ends, and binding with mild steel wire (annealed) not less than 0.9 mm dia conforming to Fe 400 or 410 S complete as specified and directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping incl necessary use and waste of form work complete as specified and directed.

M&L PCC Concrete bed to drain pipes including packing under, and haunching against the sides of pipesafter they are laid and tested in cement concrrete 1:4:8 type D-2 for 150 mm dia SGSW pipe complete all as specified and directed.

M/s Narendra kumar Agrawal

m/s modern builder

M/S Sunshine Construction

M/S GARG CONSTRUCTION

Goyal Construction

ANJALI CONSTRUCTIONS

Messers Yogendra Kumar Sankhla

PD GUPTA AND COMPANY