eNIQ No. - 01 /WBPWD/AE/AHESD of 2024-25

Amount

Supply of Split type 1.5 or higher ton capacity (Non-Inverter) Air conditioner of BEE 3 Star rating (Minimum), with Super Tropical - Return Cooled Rotary Compressor, 18000 Btu/h (Minimum), Indoor units PCB. covering by metal sheet, Indoor unit Refrigerant R-32/410A, Multi port Refrigerant inject coil, outdoor & indoor unit coil must be made by copper tubes. [Make Daikin/Hitachi/Mitsubishi/O-General)

Supply, installation, testing and commissioning incl. vaccumiazation and nitrogen testing as required of following nominal sizes of soft/hard drawn copper refrigent piping for above ac complete with fitting with suitable adjustable ring type hanger supports, jointing/brazing incl. accessories insulated with XPLE class-O tubular insulation with / class O closed cell elastromatric nitrile rubber tubular sleeves section of specified thickness as given below for suction and liquid line all accessories as per specification etc as required. (Make: Ryoku/Totaline/Jobu/Godrej)

12.7mm (1/2") OD (with 13mm insulation) or suitable size as per manufacturer advice.

6.35mm (1/4") OD (with 13mm insulation) or suitable size as per manufacturer advice.

Supplying & drawing of 3 core x 2.5 sq.mm. PVC insulated copper cable for interconnecting the indoor & outdoor unit. (Make: Havells)

Supplying, fitting & fixing of 5/8 th. Inch dia Heavy duty PVC drain pipe for condensed water as per direction of EIC.

Installation the outdoor & indoor unit, after making holes in wall by expert labour, also mending good after complete the work, Connecting the pipe line testing the leack by gas pressure (minimum 400 PSI ) and vacuuming the unit properly (Minimum -30 PSI), hold the vacuum up to 48 hours, after release the gas testing the Split type Room Air conditioner with supply & fitting adjustable powder coated painted heavy duty iron bracket.

Supplying, fitting and fixing of 25 mm PVC pipes of approved make (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS: 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,etc as directed complete in all respect.

PWD Sche. Item: D-14/34(a): Supply & fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl S&F G.I. connector, 6mm dia MS suspender bolts & nuts, steel fastener etc as required of the following size incl. Al painting of MS support.

(i) With out angle iron support 100X50X1.25 (18SWG)

Charges for providing 75mm dia core cutting on wall of thickness 24 inch to 36 inch or RCC floor of thickness 100mm to 150mm, using highy skill technicians and best quality machine like Hilti/DeWalt/Bosch.

SUPER COOLING AGENCY

SKY DECORATIONS PRIVATE LIMITED