Construction of control room with electrification and Providing various SS Structure plinth and allied civil works and SS Erection works for Establishment of new 33/11 KV SS with 1 x 8 MVA Power Transformer at MARIKKAMPALLY in Krishnagiri EDC

Amount

Clearing the juliflora jungle with uprooting

Filling the site with well gravel

Earth work excavation in all type of soils with an initial lead of 10m and lift of 2m - in Hard Gravely Soil

Earth work excavation in all type of soils with an initial lead of 10m and lift of 2m - in MR and DMR not requiring blasting

Earth work excavation in all type of soils with an initial lead of 10m and lift of 2m - in Hard rock requiring blasting

PCC 1:3:6, using 20mm HBG machine crushed metal for foundation padding concrete including cost of cement and all materials, curing, lead, lift etc., complete - FOR TRANSFORMER PLINTH AND STRUCTURE PLINTHWITH OUT FORM WORK

PCC 1:2:4 using 12 to 20 mm HBG machine crushed metal for plinth with formwork including cost of cement all materials,labour,lead lift, curing etc., complete - Transformer Plinth & Structure Plinth

PCC 1:2:4 using 12 to 20 mm HBG machine crushed metal for plinth with formwork including cost of cement all materials,labour,lead lift, curing etc., complete - PCC Curb wall with formwork

RR masonry in CM 1:5 mix, using good quality stone for foundation and basement including cost of all materials, lead, lift and curing etc., complete.

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for plinth beam with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement.

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for continuous lintel, sunshade, slab, beams with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement.( By using mixer machine and vibrators) - Lintel Beam

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for continuous lintel, sunshade, slab, beams with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement.( By using mixer machine and vibrators) - Sunshade 0.6m width

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for continuous lintel, sunshade, slab, beams with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement.( By using mixer machine and vibrators) - Beam

RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for continuous lintel, sunshade, slab, beams with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement.( By using mixer machine and vibrators) - Roof slab 130 mm tk.

RCC1 :1.5:3 mix using 12mm to 20mm HBG metal ( machine crushed ) for Breaker plinth and culvert with formwork including all cost labour materials lead lift etc complete but exculding cost of steel reinforcement - Breaker Plinth with form work

RCC 1:1.5:3 mix using 12mm to 20mm HBG metal (machine crushed) for precast slab with form work including all cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement ( By using mixer machine and vibrator )

Brick work in CM 1:5, using good quality Chamber bricks for cable duct of size 23 x 11 x 7 cm including cost of all materials, labour, lead, lift, curing and transporting etc., complete.

Brick work in CM 1:4, using good quality chamber bricks for super structure of size 23 x 11 x 7 cm including cost of all materials, labour, lead, lift, curing and transporting etc., complete.

Filling the dispersion trench with 40mm size HBG jelly including all labour, lead, lift etc., complete.

Flooring with Vitrified tiles 0.6 x 0.6m of approved Quality, design & colour laid in cement mortar 1:3 -20mm thick over concrete with p.c.c 1:4:8 100 mm thick including pointing with same coloured cement finishing the joints, including cost of all materials, labour, lead, lift, etc. complete.

Flooring with best quality of Anti Acid non – slippery colour ceramic tiles laid in cm 1:3, 20mm thick and pointed with same colour cement over a bed of PCC 1:5:10, 100mm thick using 40 mm HBG metal for battery room floor, including cost of all materials, labour, lead, lift etc. complete. (make: Johnson, Regency)

Supplying and fixing of non-slippery ceramic tiles of approved quality and colour for toilets laid over the CM 1:3, 100mm thick flooring over PCC1:4:8 concrete 100 mm thickand finished to slope and hatched including cost of all materials, labour, lead, litf etc., complete.

Daddoing inside the wall at toilet with glazed tiles to a height of 1m over CM 1:3, 12mm thick and joint shell be finished with white cement including cost of cement, all materials, labour, lead, lift and curing etc., complete.

Dadooing with approved quality of anti-acid colour ceramic tiles laid in cm 1:3 12mm thick and pointed with same colour cement for battery room from floor level including cost of all materials, labour, lead, lift etc. complete (make: Johnson, Regency)

Flush pointing with CM 1:3, for RR walls including cost of cement, all materials, labour, lead, lift and curing etc., complete.

Plinth protection in PCC 1:4:8. using 40 mm HBG metal for 100 mm tk. and finished the surface with CM 1:3, 20mm tk. including cost of all materials, labour, lead, lift and curing etc., complete.

Providing and laying weather proof Tiles 300mmx300mm size over screed concrete1:3:6 with average thickness of 25 mm for required gradient and using best quality of one course of weather proof tils of approved quality using in CM 1:3, 12mm thick and using 3mm spacer and pointing with water Repellent U Bond and grout including cost of all materials, transport curing etc., complete.

Supplying and fabrication and placing in position MS/ RTS steel reinforcement for RCC works including labour for curing , bending, tying and fixing in position including cost of all materials, lead, lift, binding wire etc., complete.

Plastering with CM 1:5, 12mm thick for inside and out side walls including cost of all materials, labour, lead, lift etc., complete.

Plastering with CM 1:3, 12mm thick for septic tank including cost of all materials, labour, lead, lift etc., complete.

Plastering with CM 1:3, 20mm thick for RR top including cost of all materials, labour, lead, lift etc., complete.

White washing two coats by using emulsion paint over primer coat with white colour for ceilings including cost of all materials, labour, lead, lift etc., complete.

colour washing Two coats inside walls using Interior emulsion paint over aprimer one coat and two coats of wall putty including cost of all materials, labour, lead, lift etc., complete.

Colour washing two coats out side walls by using Exterior emulsion paint over a primer one coat of approved quality with suitable colour including cost of all materials, labour, lead, lift, curing etc., complete.

Colour washing two coats by using cement paint over primer one coat of approved quality and colour for yard wall and plinth including cost of all materials ,labour lead lift curing etc complete.

Labour charges for Fabrication and fixing of Template for as per specification and drawing including cost of all materials labour lead lift etc., complete.

Labour charges for fixing of Template including aligining in position including labour lead lift etc., complete.

Fabrication and supply of GI grouting bolt for plinths as per specification and drawing including cost of all materials labour lead lift,Transport from chennai etc., complete.(20 mm Dia 1.2 m length)

Labour charges for fixing of grouting bolt including aligining in position including labour lead lift etc., complete.

Supply and fixing of MS angle for cable duct including aligining in position including labour lead lift etc., complete.

Labour charges for Transport of Pre cast slab, including aligining in position including labour lead lift etc., complete.

Supply and filling of 40 mm HBG metal including cost of all materials , labour, lead lift etc., complete.

Supply and fixing of MS rails in transformer plinth to required level and alignment as directed by the engineer incharge at site with all labour lead lift etc complete.

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete - 40 mm dia pipe.10kg/cm2

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete -32 mm dia PVC 10 kg

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., complete - 20 mm dia PVC 10 kg

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complet - 40 mm dia GM Gate valve

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete - 32 mm dia gate valve

Supply and erection of 20 mm PVS Tap for earth pits.

Providing UPVC (Un-plasticized polyvinyl chloride ) Door : providing and fixing casement doors fabricated from Un-plasticized polyvinyl chloride (UPVC) sections. Profiles : The profiles should be three chamber system which provides high insulation properties with outer frame 60 mm x 55mm with an outer wall thickness of 2.40mm. The window unit should be designed with all corner joints mitred and fusion welded. Windos should be steel reinforced with 25 x 24 x 25mm steel reinforment with a thickness of 1mm to have dimensional stability.The sash shpuld be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware : All the hardware like friction stays , handles should be screwed with self tapping screws.The handles, locks should be designed so that cannot be released from outside. Glazing : The windows system should be glazed with 5mm float glass / 6mm bion lam. Installation : The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber.The window system should be fixed directly to the plastered brick wall using self expanding nyion plug and driving ms electroplated screws into plug.

Supplying and fixing UPVC ( UN - plasticized polyvinyl Chlorise) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125 GSM and 100 % corrosionfree, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) coverd with over all the edged of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle.The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanisam between sash and outer frame that enable opening of the window. The window should be fixed to the wall with 100 % packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work.

Supplying and fixing UPVC ( UN - plasticized polyvinyl Chlorise) Louvered ventilator of from the profile the size of outer frame 60mm x 58mm and shutter profile and shutter profile of size of 60 x 78mm both profile are reinforced with GI/1mm 125 GSM and 100 % corrosionfree, the profiles are multi chambered section with wall thick of 2mm. The EPDM rupper (black colour) covered with all over the edges of frame and shutter. The corners and joints should be fixed to the wall with 100 % packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use of work.

Supplying and fixing in position of PVC door shutter made of Single Pannel laminated Plastic section of size 200 x 20 mm and PVC extraced shutter frame of size 24 x 60 mm including cost of 3 nos 85 mm butt hinges for single leaf door of size 0.80 x 2.00 m with 2 No aluminium handle and 2 nos 150 x 2 mm aluminiam towel bolt hinges etc., complete.

Providing and fixing sanitary fitting consisting of Neycer/parryware of oriya patten Water Closet 580x440 mm with P/S trap connecting with PVC ventilating shaft and Y bend complete, including cost of all material, labour, lead, lift, etc, complete.

Supply and fixing of wash basin of size 550x400mm coloured colour and of approved quality and make[Parryware or equivalent] with 12/15mm dia brass CP pillar tap [waterman], 32mm PVC waste pipe [Kohinoor], 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection [Kohinoor] etc. fixing the basine in the wall with GI/Alu. brackets, giving necessary water connection etc., and mirror with beveled edge fixed with suitable CP brass screws etc., complete.

Supplying and fixing of 15mm high quality brass screw down bib cock such as leader, zeolite and zenith of any other approved quality cost of all materials, labour, lead, lift, etc., complete.

Letter writing the Name of Sub-Station and slogans including cost of paint, labour for writing complete in all respects.

Supplying and fixing of 1000 lit capacity sintex tank of approved quality including cost of materials labour for fixing lead lifts etc., complete

Providing PVC down fall pipe using 110mm dia 4 Kg / sqcm, PVC pipe and pvc clamp line supreme etc, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers.

Supplying and fixing of 110mm dia PVC pipe of 3m height with cowl including all cost of materials lead lift etc complete.for septic tank

Supplying and fixing of 160mm dia 6 Kg/Sqcm PVC pipe including all cost of materials lead lift etc complete.for septic tank

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator). (SD 22)

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated Multi strand unsheathed Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113 mm Steel switch box for 5 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC plug point. (SD 34)

Supply and fixing of 4' 16 W LED type flu. fitting complete with Electronic choke and condenser with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with flu. tube. (SD 87)

Supply and fixing of 4' 16 W Twin type Mirror optic suspension fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes. (SD 91)

Supply and fixing of standing holder (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for incandescent lamp with guard and 60 W bulb. (SD 81)

Supplying and fixing of 2 x 36 W FTL Street light fittings crompton make (SFE 1624 HSBN) including cost of all materials, labour, lead, lift etc., complete, as per standard specification.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion

Supply and fixing of fancy glass shade and 18 W CFL for BH point. (SD 80)

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. (SD 111)

Supply and fixing of 375 mm (15") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall. (SD 116)

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work. (SD 228)

Supplying and fixing of 4 Pole 32 Amps Isolater 1 No with MCB box 4 Pole including terminal block for testing purpose at relay and CC room including cost of all materilas, lead, lift etc., complete.

Supplying and fixing of approved quality of aluminium towel rod with powder coating of size (2 ft) and fixing the same over teak wood round block and soap tray (PVC) in bath room including cost of all materials lead lift labour etc complete.

Providing projected border of 7.50cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing etc., complete.

Supplying and fixing of 110mm dia PVC Slotted pipe for dispersion trench with covering with roof pantiles for covering the sides partly as per drawing including cost of all materials lead, lift etc. Complete.

Supplying and fixing musical quartz type Wall Clock of size 30 x30 cm of approved quality such as Ajantha / Seiko/ Citizen etc including transport, fixing charges etc complete.

Supply and fixing of MS grill for Windows and ventilators incluidng the cost of fabrication, transporting, lead, lift, etc., complete.

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete - S Type chair with nylon seated

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete - Steel side rack open type 36''x15''x18''

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete - Steel half bench

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete - steel stool 15''x15''x18''

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete - Steel Table 45''x24''x30''

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete - PVC armed Chair of reputed make

Supplying of 5 Mtrs wide MS grill gate and 0.90m wide MS wicket gate as Per drawing and as per direction of Engineer at site cost including all materials,T&P lead,lift Painting with two coats of approved enamel paint over one coat of red oxide primer paint etc complete

supplying,fabrication,galvanising and fixing of GI angles for fence post including cost of all materials lead and lift etc., complete

Supplying and laying of chain link fencing including cost of all materials, labour, lead, lift etc complete

Wiring with 2x2.5 sq mm pvc insulated S.C unsheathed copper conductor of 1100 volt grade in suitable pvc rigid pipe on wall or ceiling with pvc accessories and with teak wood switch box and 5 Amps F.T switch with painting of suitable colour for open pvc light point. SD18

Supply and fixing of Entrance gate light with CFL bulb fittings including cost of all materials,labour etc complete

Providing projected border of 10cm width including cost of materials, labour, lead, lift etc., complete

Providing Anchor /Grip rod for foundation in the rock surface with drilling of 40 mm dia holes and fixing of 25 mm dia RTS rod 1.m length inside the holes and 1m length out side the holes with L shape bending including cost of all materials labou

Providing RCC Hume pipe in the WBM road (30 CM) including cost of all materials,labour,lead,lift etc., complete.

Supplying and filling of 20 mm HBG metal with required thick all lead and lift including and all other T&P etc., complete.

Supplying and filling of stone dust with required thick all lead and lift including and all other T&P etc., complete.

Supplying and filling with red gravel including all lead lift labour watering consolidation , water sprinkler and other T&P etc., complete

Drilling bore well of 150mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labouretc., complete as per specification Upto 100 Mts

Drilling bore well of 150mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labouretc., complete as per specification between 100 - 200 m

Drilling bore well of 150mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labouretc., complete as per specification Beyond 200m

Supply and erection of 180mm (7”) dia rigid PVC casing pipe, having 6kg/cm² including cost all materials,lead, lift, re-boring the holes to required depth etc., complete with cover at the top of the bore well.

Supply and erection of 3 HP sumersiblemotor of any reputed make having ISI make with single phase (or) as approved by the Board Engineer at site to pump water to a height of 175mts.and delivery unit with foot valve v-belt arrangement including cost of all materials, labour, erection charges, 3 HP, 400/440V L&T make starter to suit the sumersiblemotor including the cost of all materials, labour, lead and as per the instruction of Engineer in charge at site complete in all respects.

Supply and erection of 3 phase 30/32 Amps ICTP switch with fuse arrangements to suit the compressor with cost of all materials, labour, lead and lift etc., complete in all respects.

Supply and erection of 32mm diaUPVC pipe having ISI mark and as per IS 4985 2000 (10 Kg/CM²) in and outside of the bore well including cost of all materials, labour, lead,lift etc., complete.

Supply and fixing of 15 Amps main fuse carrier in T.W.Board (600x600mm)with hings,screw, hook wall varnished including cost of all materials, lead, lift etc., complete in all respects.

Labour charges for laying of 4 core 6 Sq mm power cable from nearest power point to 5 HP motor including earth work excavation ,laying power cable in the pit and top covered with country bricks and refilling with excavated earth, lead. lift ,etc. complete

Charges for geophysical survey for invetigation of borewell point at various location in the SS site

Providing Anti Terminate Treatment over the Plinth Building area in 3 stages ( foundation stage, Flooring stage and Outside area ) including cost of all materials, labour, lead, lift etc., as per standard Specifications and directed by the Engineer incharge complete.

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer - RS Joist 200 X 100 mm

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer -MS CHANNEL 125 X 65 mm

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer -MS CHANNEL 100 X 50 mm

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer -MS ANGLE 100 x 100 x 8 mm

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer -MS ANGLE 50 X 50 X 6 mm

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer -MS FLAT 65 X 10 (Eathmat only)

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer -MS FLAT 50 X 8 ( Including L.section)

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer -MS ROD 40 mm (Including Earth rod)

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer -MS/RTS ROD 20 mm (Including I-bolt)

Supply of the following Steel items as per relevent IS of various required lengths for Structures and other purposes as directed by the Field Engineer -Chequred plate 6 mm

Transporting of Iron & Steel items from various steel yard at chennai ( to Marikkampatty 430Kms).,including loading and unloading charges.

SUPPLY OF POWER CONNECTORS - 4 Bolt Tension fitting for Zebra

SUPPLY OF POWER CONNECTORS - " T " Clamp for Zebra to Zebra

SUPPLY OF POWER CONNECTORS -" T " Clamp for Zebra to 2" B/B

SUPPLY OF POWER CONNECTORS -Switch end clamp for Zebra

SUPPLY OF POWER CONNECTORS -Switch end clamp for Mink

SUPPLY OF POWER CONNECTORS Switch end clamp for 2" Bus Bar

SUPPLY OF POWER CONNECTORS -PG Clamp for Zebra

SUPPLY OF POWER CONNECTORS -Free end Clamp for 2" Bus Bar

SUPPLY OF POWER CONNECTORS -Corona Bell for 2" Bus Bar

SUPPLY OF POWER CONNECTORS -L clamp for Zebra

SUPPLY OF POWER CONNECTORS -Reducer clamp for 2" busbar

Supply of Yard light poles and Fittings - 8.0 Mtr long stepped tubular pole for yard light

Supply of Yard light poles and Fittings5.5 Mtr long stepped tubular pole for yard light

Supply of Yard light poles and Fittings72 Watts LED lamp with fitting

Supply and fixing of fire fighting equipments as per norms - Foam type - 9 liter

Supply and fixing of fire fighting equipments as per norms DCP type - 25 liter

Supply and fixing of fire fighting equipments as per norms DCP type - 10 kgs.

Supply and fixing of fire fighting equipments as per norms DCP type - 5 kgs.

Supply and fixing of fire fighting equipments as per norms Fire bucket

Supply and fixing of fire fighting equipments as per norms Rubbermat of size 2000X1000X10mm

Labour, Machineries, consumables for Fabrication of Heavy section without Lengthwise welded joints (Sectional weight 14 Kg/Mtr and above)

Labour, Machineries, consumables for Fabrication of Heavy section with Lengthwise welded joints (Sectional weight 14 Kg/Mtr and above)

Labour, Machineries, consumables for Fabrication of Light section (Sectional weight below 14 Kg/Mtr)

Labour for Erection of Structure Heavy section (Sectional weight 14 Kg/Mtr and above)

Labour for Erection of Structure Light section (Sectional weight below 14 Kg/Mtr)

Labour for rust removing, cleaning painting of first primer coat (Red oxide) of all sections including cost of paint, brush & consumables

Labour for rust removing, cleaning painting (Aluminium) of first finishing coat of all sections including cost of paint, brush & consumables

Labour for painting (Aluminium) of second finishing coat of all sections including cost of paint, brush & consumables

Labour for Erection of 33/22 KV breaker with own crane arrangement and connecting link rod, SF6 gas filling and other consumables including support poles cutting, jointing, providing holes and bending of pipes whereever required and as directed by the field engineer

Labour for erection of 33/22/11 KV Measurement Transformer using manual labour or crane own arrangement (one S Ph or 3 Ph unit ) including providing holes wherever required as directed by the field engineer.

Labour for erection of CT/PT junction box including fabrication of clamp.

Labour for erection of 33KV AND 11KV AB switches including the cost of consumables, lubricant, wiring and alignment, checking of operation and commissioning and as directed by the field engineer.

Labour for erection of LAS Station type single pole stack 33 KV /11KV including fabrication of base if required

Labour for erection of LAS Distribution type single pole stack 33/11KV including fabrication of base if necessary

Labour for erection of Insulators single pole stack 22/11 KV

Labour for erection of strung bus of 11/33KV Single Zebra Conductor (1 span = 3 runs) including hoisting of insulator

Labour for erection of Busbar including fabrication and any modification of end clamps wherever necessary and as directed by the field engineer. Using 50mm bus bar of length (without making bends)

Labour for erection of droppers and jumpers including fabrication and any modification of end clamps wherever necessary and as directed by the field engineer.

Labour for Erection of Simplex Panel including alignment and earthing as directed by field engineer

Labour, tools for charging of battery of 110V DC 120AH

Labour for erection of battery including assembly of wooden stand, painting of acid proof paint

Labour for erection of cable in duct / trench including cost of Alu.tag for identification - Upto 8 core

Labour for erection of cable and clamping in structures including fabrication of clamps and fixing at uniform intervals as directed by field Engineer- Upto 8 core

Labour for erection of yard light pole including laying of cable inside the pole

Labour for erection of LED lamp 72 W fitting with fixture and fuse box including wiring and testing for burning condition; including the cost of 15 amps 2way strip connector and other consumables

Labour for loading or unloading of fragile materials using board crane

Labour for loading of unloading nonfragile materials using board crane

Labour machineries, consumables for fabrication of earth electrode 10mtr / 6 mtr length or as directed by the field Engineer

Labour machineries, consumables for fabrication & erection of earth spikes

Labour machineries and consumables for erection of earthmat & earth raisers as directed by the field Engineer at site

Providing 150mm dia bore to a depth of 9 mtrs for earth electrode and labour for fabrication and erection of earth electrode in to the bore and filling with red soil, A4 grade bentonite powder, coal powder with 5% common salt mixed with available site clay soil with water 5 Kg/meter depth in earth bore and pouring water and tightening of earth bore upto satisfactory earth and supply of identification board of size 300x150mm of 14swg and lettering and 12mm M.S. Rod to be fixed to the board.

Labour for excavation and refilling of soil for earth mat

Labour charges for painting of earth raisers by green enamel paint and where ever required including cost of enamel paint (Dulex, Asian, Berger preferred) and other consumables as directed by th field Engineer.

Supply and provision of 600 mm mean dia 300 mm height, 36mm thick cement collar for identification of earth electrode location including 1 primer and 2 coats of colour wash as directed by the field engineer

Labour charges for fabrication of bolt of required length out of 16 to 25 mm dia G I rod including the cost of GI rod and 2 Nos. G I Nuts & washer as directed by field Engineer

Supply and provision of M5,M10,M12 & M16 (full thread ) G.I. Bolt, Nuts & GI washer of various size for erection of AB Switch and Insulators or any other purpose wherever necessary and as required and as directed by field Engineer

Fabrication, supply and mounting of main equipment board 2500 X 1500 mm out of 14 SWG M.S Sheet

Manufacturing and supply & fixing of LC/Keyboard of size 1200 x 90 x 150 mm (Inner size) made out of teak wood with 75 x 25 mm Alu frame embedded with 12mm pre laminated wood particle board using screw on rear 2 Nos plain glass of 5 mm thick fixed with metal roller moving on Alu. Channel should be provided on front with locking arrangements. LG glass piece should be fastened on the glass shutters for opening and closing wall clamp made out of 6 mm plate should be provided on as per drawing and as directed by the field Engineer including cost of all materials.

Labour charges for drawing layout and writing details in LC / Keyboard including cost of enamel paint (Dules, Asian, Berger preferred) and other consumables as directed by the field Engineer.

Fabrication, supply and fitting of CT / PT Junction box of size 400 W X 150 D X 300 H made out of 14 SWG (2mm) M.S. Sheet with 16 Nos. termination of stand type with two nuts and washers suitable for 4 Sqmm copper cable and 5 Nos. 1" gland wherever required as directed by the field engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials

Fabrication supply and fixing of AC distribution box of size 750 W x 250 D / 750 H mm made out of 14 SWG (2mm) M.S. sheet wherever necessary as directed by the field Engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting MCB and MCCB detachable gland plate and locking arrangement including cost of all materials

Fabrication, Supply and mounting of yard light box of size 200 W X 200 H X 150 D mm out of 18 SWG (1.2mm) M.S Sheet with cable entry holes, fixing arrangements for fuse units and mounting clamps with 1 no. 5 amps porceline rewirable carrier as directed by the field Engineer including cost of all materials

Labour Charges for removing rust,primer coat, first and second coat painting both sides and writing details in M.S. Boards, R S Joist & Yard light pole etc., including cost of enamel paint (Dulex, Asian, Berger preferred) and other consumables as directed by th field Engineer.

Supply and erection of B-class GI pipe for extension of tandom / down pipe for AB switches and for any other work as required by as directed by field Engineer including cost of GI Pipe of 40 mm dia

Supply and fixing of ISI mark Bakelite/ HRC Rewirable fuse holders in panels / boxes for AC/DC/PT circuits wherever required as directed by field engineer - 32 Amps.

Supply and fixing of ISI mark Bakelite/ HRC Rewirable fuse holders in panels / boxes for AC/DC/PT circuits wherever required as directed by field engineer - 63 Amps.

Supply and fixing of ISI mark HRC Fuse without holder of reputed make in panels / boxes for AC/DC/PT circuits wherever required as directed by field engineer- 32 Amps

Supply and fixing of ISI mark HRC Fuse without holder of reputed make in panels / boxes for AC/DC/PT circuits wherever required as directed by field engineer- 63 Amps

Supply and fixing of ISI mark Porcelain rewirable fuse unit of reputed make in panels, boxes for AC circuits wherever required as directed by the Field Engineer - 200 Amps fuse

Supply and fixing of wooden board 25mm / Hylam sheet of 10mm thickness for fixing fuse units wherever required as directed by the field Engineer

Supply and fixing of mounting channel suitable for CBTM 5 terminal block in Panel / Box as required and directed by the field Engineer.

Supply and fixing of disconnected type terminal block suitable for C.T circuits in panel / box as required and as directed by field engineer

Supply and glanding of ISI mark cablegland of suitable size of reputed make including removing of insulation of cable and providing suitable holes as required and as directed by the field engineer - 15 mm

Supply and glanding of ISI mark cablegland of suitable size of reputed make including removing of insulation of cable and providing suitable holes as required and as directed by the field engineer - 19 mm

Supply and glanding of ISI mark cablegland of suitable size of reputed make including removing of insulation of cable and providing suitable holes as required and as directed by the field engineer - 25 mm

Supply and glanding of ISI mark cablegland of suitable size of reputed make including removing of insulation of cable and providing suitable holes as required and as directed by the field engineer - 28 mm

Labour for provision of cable end gland

Supply and termination of cable core ends including the cost of cable socket (lug) ferrules, Aluminium tag straps etc., as per cable schedule and as directed by the field engineer

Supply and fixing of Godrej 6 lever navtol lock with triplicate keys for AB Switch and for any other purpose including the cost of ring and key token as directed by the field engineer

Supply and fabrication of sand drum made out of oil drum of size 580 mm dia x 420 mm height with conical cover made of tin sheet provided with handle incluidng cost of barrel, sand, tin sheet & other materials

Supply and provision of 12 / 25 X 3 mm flexible braided copper tape / rope for interlinking panel earthing and for any other purpose on any sizes including the cost of suitable copper lugs for criping of at both ends etc.as directed by field Engineer.

Labour for erection of Station transformer with own crane arrangement

Labour for erection of HG fuse 3 pole set of 11 KV

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

Ashok.S