CA NO. GE AF NO.1/GUR-07/2024-25 REPAIR, MAINTENANCE AND REPLACEMENT OF HIGH MAST LIGHT, STREET LIGHT PARAMETER SECURITY LIGHT, SOLAR LIGHT INCLUDING REPLACEMENT OF UNSERVICEABLE CONVENTIONAL FLOOD LIGHT, STREET LIGHT FITTTING WITH ENERGY EFFICIENT L

Amount

Supply and fixing in replacement LED Street Lights 72 Watt, CCT not less than 5700k and Efficacy not less than 110lm/W with Potted Driver of pressure die-cast aluminium housing street lights have clear toughened glass diffuser and bottom opening driver compartment. It comes up with secondary optics and individual high power LEDs for better light distribution and control. K08 street light with IP66 degree of protection and Potted Driver with 5KV internal and 10KV external surge protection complete all as specified and directed.

Supply and fixing in replacement LED Street Lights 90 Watt, CCT not less than 5700k and Efficacy not less than 120lm/W with Potted Driver of pressure die-cast aluminium housing street lights have clear toughened glass diffuser and bottom opening driver compartment. It comes up with secondary optics and individual high power LEDs for better light distribution and control. IK08 street light with IP66 degree of protection and Potted Driver with 5KV internal and 10KV external surge protection complete all as specified and directed.

Supply and fixing in replacement LED Street Lights 120 Watt, CCT not less than 5700k and Efficacy not less than 120lm/W with Potted Driver of pressure die-cast aluminium housing street lights have clear toughened glass diffuser and bottom opening driver compartment. It comes up with secondary optics and individual high power LEDs for better light distribution and control. IK08 street light with IP66 degree of protection and Potted Driver with 5KV internal and 10KV external surge protection complete all as specified and directed.

Supply and fixing in replacement LED Flood Lights 200Watt, CCT not less than 5700K and efficacy not less than 100lm/W with single piece pressure die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control gear. LEDs are surrounded with aluminium reflector for better light distribution and control. This bottom opening flood right range is with IP66 degree of protection, impact resistance of IK 07 and integrated driver with 5KV Inbuilt surge protection for better enhanced features complete all as specified and directed..

Supply and fixing in replacement LED Flood Lights 50Watt, CCT not less than 5700K and efficacy not less than 100lm/W with single piece pressure die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control gear. LEDs are surrounded with aluminium reflector for better light distribution and control. This bottom opening flood right range is with IP66 degree of protection, impact resistance of IK 07 and integrated driver with 5KV Inbuilt surge protection for better enhanced features complete all as specified and directed.

Supply and fixing in replacement LED Post top lantern 25 Wattage , CCT not less than 3000K and effficacy not less than 90lm/W with die cast aluminium spigot, spun aluminium powder coated top cover and clear acrylic diffuser IP65 complete all as specified and directed.

Supply and fixing in replacement LED based bollard of 15 Wattage, CCT not less than 3000K and effficacy not less than 70lm/W with aluminium extruded housing with glare free opal diffuser IP65 complete all as specified and directed.

Supply and fixing in replacement of New generation, energy saving, environmental friendly, long life aesthetically designed die-cast aluminium landscape luminaire for downward lighting with high power LED as light source of 16Wattage, CCT not less than 3000K and efficacy not less than 70lm/W complete all as specified and directed.

Replacement old/burnt LED light driver suitable for LED Street light fitting of capacity 30/45/60/120 watt with existing make or equivalent out of makes specified in list of make, complete all as specified and directed by Engr-in-Charge.

Replacement old/burnt LED light driver suitable for LED Flood light fitting of capacity upto 50/60/120/200 watt with existing make or equivalent out of makes specified in list of make complete all as specified and directed by Engr-in-Charge

S&F in replacement street light bracket bend to shape made out of 25 mm dia medium grade GI pipe 1.2 mtr long including MS work such as clamps , nuts , bolts and washers fixing on pole complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted surface of pole of less than 6mtr by removing all dirt, dust etc and apply paint with good finishing complete all as specified and directed.

M&L for preparation of old painted surface of electric steel pole by removing all dirt, dust etc and apply one coat of aluminium paint on complete steel surface including cross arm and writing of identification No , etc complete all as specified and directed.

S&F in replacement XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 50 sqmm 3.5 Core complete all as specified and directed.

S&F in replacement XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm 3.5 Core complete all as specified and directed.

S&F in replacement XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 10 sqmm 2 Core complete all as specified and directed.

S&F in replacement XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm 4 Core complete all as specified and directed.

Supplying and fixing including connection with over head line, street light or as directed 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC sheathed in service connections of size 6 sqmm stranded conductor 1 twin core cable flat or circular of approved make as specified and directed by Engr-in-charge.

Supplying and fixing including connection with over head line, street light or as directed 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC sheathed in service connections of size 10sqmm stranded conductor 1 twin core cable flat or circular of approved make as specified and directed by Engr-in-charge.

S& F PVC insulated & sheathed copper flexible cable black as per IS 694 1.5Sqmm, 2core (FR) flame retardant as specified and directed by Engr-in-charge.

S& F PVC insulated & sheathed copper flexible cable black as per IS 694 2.5Sqmm, 2core (FR) flame retardant as specified and directed by Engr-in-charge.

M&L complete for drilling hole through machine under hard standing /road in different location as per site requirement (between 03 mtr to 40mtr maximum) for laying of pipe for protection of cable etc by means of bookle and without disturbing the top surface and making good the disturbed surface if any complete all as specified.

Excavation in trenches n exc. 1.5 m wide and n. exc 1.5 m in depth, foundation etc for shafts, well, cesspits , manholes, pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft soil complete all as specified and directed by Engineer-in-Charge.

Material and labour for Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed by Engineer-in-Charge.

Removing excavated material n.exc 50 M and depositing where directed at a level n.exc 1.5 M above starting point complete all as specified and directed by Engineer-in-Charge.

M&L for sand cushioning in trenches for protection of LT under ground cable including punning and consolidation complete as sepecified and directed by Engr-in-Charge.

Supply and laying well burnt sub class ‘B’ bricks, locally available in trenches for protection of underground cable complete as sepecified and directed by Engr-in-Charge.

S & F in replacement of Contractor MNX 32, 240V 50/60Hz upto 500V,50/80Hz 3 Pole Make L&T Cat Part No- CS94111BOOO or equivalent as specified and as directed by Engr-in-Charge

M& L for Repair & testing of parts of Timer switch thermoplastic poly carbonate time panel shock, rust proof, impact and water proof, halogen and silicon free UV resistance with internally embeded high grade gasket panel shall be IP-65 protection type, system voltage 415 volts, 50 Hz, 4 wire complete all as specified and as directed by Engr-in-charge. (Note;- The rate also includes change of Wiring of any size in the panel. Parts required are seperately measured in the schedule)

S&F in replacement of timer switch 24 Hour Analog Time Switch (SST* - 15 min) all as specified and directed by Engr-in-Charge

S&F MCB 415volts TPN 63 amp 10KA breaking, capacity, ISI marked, complete all as specified and directed.

S&F MCB 240 volts Series 'C' type SPN 06- 32 amp 10KA breaking, capacity, ISI marked, complete all as specified and directed.

M&L in replacement for GI pipe light grade 40 mm dia for cable protection as specified and directed by Engr-in-charge

Supply & Fix in replacement of MCCB 63 Amps, 4 pole 415 V conform to IS/IE60947-2 with breaking capacity 16 KA Adjustable Thermal and Fixed Magnetic complete all as specified and directed.

S&F of MCCB 100 Amps 4 pole 415 Volts conform to IS/IE60947-2 with breaking capacity 16 KA Adjustable Thermal and Fixed Magnetic complete all as specified and directed.

Taking out old steel tubler poles 9 mtr by breaking PCC foundation, and all related work and making the site well finished and Shifting of Pole to another location within 54 ASP area (i.e.Tech Area/G Block/admin area/H-block, D-camp etc) complete all as specified and as directed by Engr-in-charge.

M&L for Fixing steel tubular pole single arm type 9 M retrieved from item No 31 hereinbefore including excavation in trenches in soft/ loose soil n exc1.5 M wide and net exc 1.8 M in depth and triming the sides , boring bottom surfaces to required level, providing PCC (1:3:6) type D-2 using 40mm stone agregate in foundation, 1.5 mtr GI pipe medium grade of 40mm dia for cable protection and PCC 1:2:4 type B-1 coping of pole including neccessory frame work complete all as specified and as directed by Engr-in-charge.

S&F in replacement of outdoor type panel factory made polycarbonate 3.15mm Thickness (shock proof,rust free, corrosion free,dust proof, acid and chemical resistant,fire retardant, having high impact,made of halogen and silica free,recyclable material), UV resistant, having high grade gasket made of polyurethane,should withstand glow wire test at 650C should be flame retardant,the feeder pillar panel should be as per ERDA Certification with switchgear assemblies as per IEC 60 439-1.following tests performed and passed and satisfactory : (1) Temperature Rise (2) Dielectric properties (3) short circuit withstand current Rate peak & shor time withstand current and Rated conditional short circuit current (4) Effectiveness of protective circuits. (5) Clearance & creep age distance. (6) Mechanical operation, mounted on angle iron frame of size 40mm X40mmX6mm thick Complete with necessary PCC 1:3:6 foundation work as directed at site. Make: Universal Switch Gear Control/Advance Switch Gear/Schneider

S&F in replacement of Locking box made out of MS Sheet 16 Swg of Size 300x200x100mm comprising of aluminium Bus Bar 63 Amp Duly insulated mounted on porcelen fixed in locking box with nut bolts and washers including one number MCB 6 Amp 10 KA 240 Volts for protection of street lights complete all as specified and as directed by Engr-in-charge.

M&L plain cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete for making coping of street/security pole of size 60x60x30 cm along with GI Pipe of 50mm light grade for entry/exit of cable all as specified and directed by Engr-In-charge. Note: The rate of pipe is seperately quoted in the schedule

M & L for complete servicing of spike barrier by taking out old oil and replacement with new HP oil and IS quality grease in barrier including welding work ,disposel of soil to a distance not exc 50mtr and junk acumulated arounds spikes complete all as specified and directed by Engineer-in-Charge.

M&L in replacement of rewinding of electric motor 3000 RPM, 80 watt S.N 1015083629, Single phase oil dip motor with super enameled copper winding wire including bearing and bushes and other accessories required to make motor functional and testing on load complete all as specified and directed by Engineer-in-Charge.

M&L in replacement of rack and pinion helical type complete unit assembly complete all as specified and directed by Engineer-in-Charge.

M&L in replacement of RF Security remote system of spike barrier complete all as specified and directed by Engineer-in-Charge. Make -Airtech

M& L for flexible HDPE pipe of dia 40mm , PE 63 & PN 4 for entry & exit of cable all as specified and directed by Engr-in-charge

M&L for cleaning and greasing,lubrication of High Mast light lowering device and making it smooth to operate as specified and directed by Engr-in-charge

M&L for repair of gear box of High Mast light lowering device and making it smooth to operate as specified and directed by Engr-in-charge

M& L in replacemet of stainless steel AISI 316 wire rope of diameter 6mm of IS make for High Mast light complete all as specified and directed by Engr-in-charge

M&L in replacement of rewinding of electric motor 1 Hp , 415 Volt with super enameled copper winding wire including bearing and bushes and other accessories required to make motor functional and testing on load complete all as specified and directed by Engineer-in-Charge.

S&F energy efficient LED aviation warning Light made of die cast housing with dust to drawn LDR sensor IP 65 all as specified and directed by Engr-in-charge Make: Halonix/havell/crompton or equivalent out of make specified in list of make.

Notes:- The amount of Rs 74245.00 against Schedule of Credit on Page No. 115 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

shakti construction

M/S PARKASH ENTERPRISES

S.R. Constructions

shiv shanker enterprises

M/S Anand Enterprises

Haryana EngineerService

M P TYAGI ENGINEERS AND CONTRACTORS

MOHIT ENTERPRISES