SPECIAL REPAIRS TO P-54 SINGLE ACCN AT DSSC WELLINGTON

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling battens spaced exceeding 15 cm for tiles, shingles etc of any size including tilting fillets complete all as specified and directed.

Dismantling unframed timber scantlings 40 sqcm and over in section, as in any position/ tile bitterns in roofing complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for roof tiles Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

Fixing only roof tiles Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.

M&L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

All as per item No. 9 here-in-before but except tiles complete all as specified and directed.

M&L for 2nd class hardwood tiles battens clean sawn with sectional area exceeding 15 sqcm but not exceeding 25 sqcm at 30 cm centers complete all as specified and directed.

All as per item No. 11 here-in-before but except battens complete all as specified and directed.

M&L for 2nd class hard-wood scantlings clean sawn as in roof members complete all as specified and directed.

S&F rolled mild steel works such as in main and cross beams, hip and jack rafters, purlins where connected to column rafters fixed with angle cleats or other connecting plates etc. conforming to Fe-410-W (Gde E-250) quality-A complete all as specified and directed.

M&L for 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275, in patches, complete all as specified and directed.

Fixing only 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts with washer complete all as specified and directed.

M&L for 20mm thick 2nd class hard wood boarding, clean sawn with butt joints supplied and fixed with nails in any situation (except flooring and skirting) complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote complete all as specified and directed.

M&L for preparation of new/previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new/old untreated surfaces of Mangalore pattern tiles including brooming down or steel wire brushing applying one coat of tile guard exterior grade apex paint over a coat of primer all as directed.

Demolition of un-reinforced concrete on roofs, floors (other than ground floors), beams/ chajjas and similar suspended work complete all as specified and directed.

M&L for 30 mm thick, plain cement concrete type B0, 1:2:4 (using 12.5 mm graded aggregate) as in roof padding/leveling course, kerbs, or chamfered on edges finished even and smooth using extra cement and mixed with water proofing compound complete all as specified and directed.

M&L for 10mm thick screed bed in CM 1:3 for floor finish and mixed with water proofing compound complete all as specified and directed. Note for item No 23 &24:- Water proofing compound shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for APP modified prefabricated polymeric membrane 4mm thick and weighing not less than 4.5 kg/sqm reinforced with non woven polyester matt black finished weighing not less than 100 gm /sqm having softening point not less than 140 degree Celsius longitudinal tensile strength not less than 300N/Sqcm, side lap & end lap 10 cm with torch application of membrane, over compatible primer @0.40 Ltr/Sqm and finishing with aluminium paint applied @ 0.10 Kg/Sqm finished complete all as specified and directed. Note: The work shall be carried out by authorised applicator of manufacturer

M&L for applying one coat of bituminous aluminium paint applied @ 0.10 kg / sqm over old APP membrane surface complete all as per manufactures instruction and complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove and making good with cement mortar 1:3 complete all as specified and directed.

M&L for cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in roof kerb or mud stops, rounded or chamfered on edges etc complete all as specified directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 25mm thick, PCC 1:2:4, type B1, using 20mm graded stone aggregate as in sub base and level course complete all as specified and directed.

M&L for coloured vitrified tiles, 9-10mm thick light shade area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, as in floors etc. complete all as specified and directed.

M&L for coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4, on vertical surface such as dado, skirting etc complete all as specified and directed.

M&L for digital non skid coloured ceramic tiles 7 to 8 mm thick (square /rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed CM 1:6, as in floors complete all as specified and directed.

M&L for digital glazed ceramic coloured tiles of size 600mm x300mmX8-10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in cement mortar 1:4, as in vertical surface such as dado, skirting etc complete all as directed.

M&L for Granite stone slab flooring 16-18 mm thick any colour/shade machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with the shade of granite stone including grinding and polishing, rounding edges as required over and including 15mm thick rendering in CM 1 :4 to be fixed all around door/window openings complete all as specified and as directed.

M&L for 12 mm thick granite tiles of approved colour, size 450 x 300 mm, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM (1:6) in floors etc, complete all as specified and as directed.

M&L for applying wax polishing over granite stone flooring including removing dust/sweeping and racking out and filling tiles joints complete all as specified and directed.

Taking down wooden frames not exceeding 1.5 sqm including shutters (without taking of the shutters from the frame) complete all as specified and as directed.

All as per items 40 above but area exceeding 1.5 Sqm and not exceeding 4 sqm complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

M&L for Ist class hard wood plain, solid, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue with pinned at joints complete all as specified and as directed.

Supply and fix for 40 mm thick plain, flush shutters, solid core constructions, with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkats complete all as specified and as directed.

M&L for 2nd class hard wood, 35mm thick semi-glazed (top glazed & bottom paneled), open rebated and prepared to receive glass etc, edges of framing moulded, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified as specified in SSR part-I, section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and as directed.

M&L for 2nd class hard wood, 30mm thick glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc, edges of framing moulded, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as in windows, ventilators etc are provided with stiles and rails as specified as specified in SSR part-I, section 8, clause 8.24(b), supplied and fitted to chowkats complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty/ wooden fillets/rubber beading in squares as directed and complete all as specified and as directed.

S&F in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty/ wooden fillets in squares as directed and complete all as specified and as directed.

M&L for preparing new or previously untreated wooden surface and applying two coats of synthetic enamel paint exceeding 10 cm width or girth complete all as specified and as directed.

S&F solid PVC factory made door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube complete all as specified and directed.

S&F factory made solid PVC Moulded door shutter with particle board core, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in the frame at site as specification & drawing including all necessary fittings like hinges, tower bolt, handle etc complete all as specified and as directed.

S&F 100mm, butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and as directed.

S&F 150mm long aluminium barrel tower bolt complete all as specified and as directed.

S&F 150mm long aluminium cast type, anodised handle, complete all as specified and as directed.

S&F 300 mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 140 mm long, floor door stopper of brass body and tongue with hard drawn steel spring, with hard drawn steel spring fixed in floor complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets and suspension grid complete all as specified and directed.

M&L for modular false ceiling systems in mineral fiber sierra having micro look teglar edges of 13mm thickness of size 595mm x 595mm GRG ceiling tiles shall have a humidity resistance of RH 99 with NRC level of 0.70 and light reflectance up to 85% and fixed with suspension system (Grid) The size of the same is 15mm x 32mm, The galvanised iron sheet of thick 0.30mm used in the manufacturing of gird is zinc coated for preventing corrosion. The main runners are hung from the soffit with help of GI wire hanger complete with installation all as manufacturers instruction and complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks with cement concrete 1:3:6, type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in mortar 1:6 complete all as specified and directed.

M&L for raking out joints/pointing to square rubble masonry, coursed or uncoursed built in cement mortar complete all as specified and as directed.

M&L for raised pointing to random or polygonal rubble uncoursed or brought up to courses in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work/stone wall in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of internal wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparing of new plastered/unplastered surfaces of walls and applying two coats cement based paint over a coat of primer all as specified and directed.

Complete removal of existing treatment on wall by scrapping, washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of oil bound distemper over one coat of primer over and including two coats of wall care putty complete all as specified and directed .

M&L for preparation of ceiling and applying two coat of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment on old plastered/ unplastered surfaces of walls and applying two coats of cement paint over a coat of primer all complete all as specified and as directed.

M&L for preparing old painted steel surface exceeding 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparing old painted wooden surface exceeding 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Dismantling water tank exceeding 500 ltr and not exceeding 1000 ltr complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, 1000 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including 20 mm dia ball brass valves, high pressured with polyethylene float and fly nut complete, screwed for iron pipe complete all as specified and as directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position of size exceeding 500 ltr but not exceeding 1000 ltr. complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position (as in lintel beam, tank, shelf, chimney, chajja etc) not otherwise specifically provided for complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4, type B1, using 20 mm graded stone aggregates as in slab supported on walls, beams and columns in floors like and including necessary form work, complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4, type B1, using 20 mm graded stone aggregates as in beams, cantilevers, bressumers, lintels over 1.50 m span etc., and including necessary form work, complete all as specified and directed.

M&L for TMT Bars, 10 mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for TMT Bars, 6 to 8mm dia & over, cut to length bent to shape, required, including cranking bending and fixing to beam slab, chajja for facilitating grunting complete all as specified and as directed.

S&F in repair vitreous china wash hand basin (Ivory colour) of size 550mm x 450mm, including fixing to wall with brackets, PVC flexible waste pipe 32mm dia brass chromium plated waste fittings, 15mm dia PVC connecting pipe including 15mm dia pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks fly nuts complete all as specified and as directed.

S&F in repair WHB round bowl type counter top of size 550 x 445 mm coloured including provision of 8 mm thick polished granite slab 900 x600 mm size, 15mm dia pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks fly nuts, PVC flexible waste pipe, 32mm dia brass chromium plated waste fittings, 15mm dia PVC connecting pipe complete all as directed and specified.

S&F in repairs looking mirror of any size using 5 mm thick mirror, edges rounded, fixed with clips all as specified fixed to wall with suitable glass screws etc., all complete all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in corner glass shelf complete all as specified and as directed. Make: ACN-1173 Jaquar or equivalent or techno-commercially equivalent.

S&F in repairs 10 Ltr capacity PVC valve less syphonic action type flushing cistern low level with inlet, ball valve float and handle Ivory in colour including brackets complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) of Ivory colour with plastic seat cover water closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair water closet vitreous china squatting pan 'Orissa pattern of size 580x440mm, with integral foot rest, Ivory colour (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F towel rail, chromium plated, 600 mm long complete all as specified and as directed.

S&F in repairs 15 mm bore bib taps, chromium plated, fancy type, with wall flange for iron pipe complete all as specified and as directed.

S&F in repairs 15 mm bore, angle valves, fancy type, chromium plated, with wall flange for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs 15 mm bore, stop cock, fancy type, chromium plated, with wall flange for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair domes and brackets(end caps) for 25mm dia aluminium coated antique finish curtain rod, suitable for single curtain rods fixed in position with appropriate screws complete all as specified and directed.

S&F in repairs 25 mm dia aluminium coated designer curtain rods antique finish fixed to brackets matched with curtain rods fixed in position with appropriate screws complete all as specified and as directed.

S&F in repairs chromium plated rain shower with shower arm fixed to steel pipe or union of 15mm bore complete all as specified and as directed. Make : Parryware cat part No. T9934A1 or techno-commercially equivalent.

S&F PVC coated galvanised stay strand (Grade 2), size 7/2.50 mm complete including suitable anchoring bolts fixed with wall with holes drilled complete all as directed and specified.

Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removal to store complete all as specified and as directed.

All as per item No 99 (here-in- before) but 20 mm bore

S&F 15 mm bore, Galvanised steel water tubes, medium grade with all fittings and fixed to wall, celing, floors and concealed complete all as specified and as directed.

All as per item No 101 above but 20 mm bore

Fixing only 15 mm old steel tubing and connections in new or old position (Walls ceiling floors, concealed etc.) complete all as specified and as directed.

Fixing only 20 mm old steel tubing and connections in new or old position (Walls ceiling floors, concealed etc.) complete all as specified and as directed.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with suitable MS clamps complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with suitable MS clamps complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends complete all as specified and as directed.

S&F 75mm dia PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed.

S&F 110mm dia PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed.

S&F 110mm dia PVC (SWR) vent cowl complete all as specified and as directed.

M&L 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Dismantling boarding/plywood, any description, fixed in any position with nails complete all as specified and directed.

S&F powder coated aluminum door/windows/partition etc. with one or more rebates using suitable size of standard aluminium sections including door stopper, including necessary joining cleats, glazing clips, rubber neoprene packing, aluminum snap beading screws complete all as specified and directed.

M&L for 12mm thick prelaminated particle board, exterior grade, both side laminated with decorative choice laminations fixed with screws to timber frame work or to aluminium frames as in doors and partitions complete all as specified and directed.

Removing accumulated material, soils/debris exceeding 250m but not exceeding 500m and depositing where directed complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick, plain cement concrete 1:4:8, type D-2, using 40mm graded stone aggregates as in sub base complete all as specified and directed.

S&F factory made machine pressed chequered cement concrete colour tiles 30 cm X 30 cm X 22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, over 20 mm thick screed bed in CM 1 :4 complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:2:4, type B1 (using 20 mm graded aggregate) in plinth protection and hard standing finish even and fair without using extra cement complete all as specified and directed.

Demolition and breaking up 150 mm bore concrete / SGSW /AC drain pipes of any description and in any position complete all as specified and as directed.

M&L for salt glazed stone ware (SGSW) pipes 150 mm bore laid in trenches and jointed complete with collars complete all as specified and as directed.

M&L for PCC 1:3:6, type C2, using 40 mm graded granite stone aggregate in concrete bed to drain pipes of 150 mm bore including packing under and hunching against the sides of pipes after they are laid and tested for complete all as specified and as directed.

M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for precast RCC cover slab in cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in slabs with plain faces setting in CM 1:4 including necessary form work moulds etc complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 using integral water proofing compound on fair face of brick/concrete surfaces and finished even and fair without using extra cement complete all as specified and as directed.

M&L for Cutting into existing manholes for connecting new drains of 150 mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

Labour only cleaning of manholes upto 60 cm depth and size complete and throwing the waste/mud out of MoD area complete all as specified and as directed.

Desilting and cleaning of septic tanks of any capacity including pumping the water with mechanical machine/ suction and throwing the waste/ mud/ liquid outside MD land including transportation complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, laid dry complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation, laying of cables, pipes, erecting of poles etc., and getting out in hard/dense soil all as specified and directed.

Returning and filling in, including speeding levelling, watering and well ramming in layers not exceeding 25cm thick with excavated soil all as specified and directed.

Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Supply only Integral Water proofing compound complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

M&L cement concrete 1:3:6, Type C1, using 20mm graded stone aggregate, as in coping including necessary form work complete all as specified and as directed.

Demolition and breaking up drain pipes 300 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

M&L for Reinforced cement concrete pipes 300 mm dia, class NP2 laid and jointed with collars complete all as specified and as directed.

M&L for cement concrete bed in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate to 300 mm bore drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and as directed.

M&L for walling of squared rubble masonry, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed.

All as per item No. 143 above but except stone complete all as specified and as directed.

M&L for keyed pointing to random or polygonal rubble uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.

Taking down old unserviceable point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse or for taking credit and making good disturbed surfaces of walls, floors, etc all as directed.

Disconnecting/ dismantling of old existing un serviceable DB's any way 240/415 Volts with their old/unserviceable burnt MCB's all as directed.

M&L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & including provn of modular boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinking for modular boxes & making good to walls, floors etc. complete all as specified & as directed for one light point controlled by one switch NOTE: 1) Cutting chases and making good the disturbed surfaces is included in the unit quoted rates. 2) Modular boxes shall be measured and paid separately.

All as per item No. 148 here in above but for one socket outlet 3 pin 5 Amps on the same board with other switches

All as per item No. 148 here in above but for one socket outlet 3 pin 5 Amps on the independent board

All as per Item 148 her-in-before above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket

M&L for concealed sub-main wiring 2 runs of 6.0 sqmm and one run of 6.0 sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduits & sinking for modular boxes & making good to walls, floors etc. complete all as specified and as directed.

M&L for concealed sub-main wiring with 2 runs of 4.0 sqmm and one run of 4.0 sqmm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC rigid conduit, medium grade with all fittings and accessories ISI marked including cutting chases for conduits & sinking for modular boxes & making good to walls, floors etc. complete all as specified and as directed. Note for item No 152 & 153: (a) 03 runs of copper conductor & 01 run of PVC rigid conduit (Medium grade) will be considered as one run. (b) Cost of making good the disturbed surfaces & matching to existing one is deemed to be included in the unit quoted rates.

S&F Modular type switch single pole 6 Amps one way, 1 module all as specified and as directed.

S&F Modular type Socket 6 Amps. all as specified and as directed.

S&F Modular type socket out let 2 in 1, 6/16 Amps all as specified and as directed.

S&F Modular type switch single pole 16 Amps one way all as specified and as directed.

S&F and concealing modular metal flush box suitable for fixing switches/sockets of following modules all as directed:-

1/2 Module

3 Module

4 Module

6 Module

S&F modular cover plate suitable for fixing switches/ sockets of following modules all as directed.

1/2 Module

3 Module

4 Module

6 Module Note for Item No 158 & 159 : The make/model of Modular flush boxes & Modular cover plates shall be the same as that of switches/sockets etc.

S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite 63.5 x 25mm, two/three terminal complete all as specified and directed.

S&F IP>=20, Class I Wall mounted 4 feet LED integrated batten with integrated lighting fixture of 20 W with min 1800 lumens ,electronic driver & polycarbonate diffuser complete with all accessories, prewired and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit all as specified and directed by Engr-in-Charge. Make: Havells Cat No:LUMILINEPLUSBS20WLED865SPCSS or techno-commercially equivalent.

S&F IP>=20, Class I Wall mounted 2 feet LED integrated batten with integrated lighting fixture of 10 W with min 800 lumens ,electronic driver & polycarbonate diffuser complete with all accessories, prewired and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit all as specified and directed by Engr-in-Charge. Make: Havells Cat No:LUMILINEPLUSBS10WLED865SPCSS or techno-commercially equivalent.

S&F wall mounting Decorative fixture with plastic body suitable for 3 w LED lamps of E27 Cap. Make : Havells Cat No LHFOECE1TZ1O014 or techno-commercially equivalent.

S&F LED lamps of 3W, 3000K, WW, candle type with E-27 base cap all as directed Make:- Cat No: LHLDERUEMD8X003, Make: Havells or techno-commercially equivalent.

S&F IP >= 65, IK>=07, Class I energy saving and environment friendly long life high power LED as source of building security light of 25W made up of pressure die cast aluminum housing with acrylic cover as diffuser with including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS clamps made out of 25x3mm flat iron 2 Nos including nut and bolts for fixing the bracket and making connections in flexible conduit all as directed. Make:- Cat no ENDURAPEARLSL25WLED757SASYTOPC Endura pearl of Havells or techno-commercially equivalent.

S&F IP >= 66, IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaries 10W with min 800 lumens made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make :- Havells, Cat no HEXAFT10WLED857SSYMBOPC or techno-commercially equivalent.

Supply, install, testing & commissioning of Exhaust fan, PVC body with automatic back shutter louvers 250 mm sweep, 1280 RPM or more, Air Delivery not less than 860 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventilator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) including taking down of unserviceable exhaust fan complete all as specified & as directed. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces including any frame work/cement work/ wood work/ welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates. (ii) Old unserviceable Exhaust fans should be handed over to MES stores.

Supply, Fix, Installing and Testing Vertical type Storage electric water heater (Geysers) of 25 Ltrs capacity, Tank made of ultra thick super cold rolled steel plates with high density PUF insulation, 2 KW, 230 V, Single Phase, 50 Hz, AC, BEE 5 Star rated including multifunction safety valve and suitable plug top and 2 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos and stickering of Qtr No including taking down of unserviceable geyser complete all as specified and directed Note:- (i) Old Geysers should be handed over to MES Stores. (ii) Installed Geyser's warranty card should be submitted to the Engr-in-Charge. (iii)The cost of making good the disturbed surface and matching to the existing surface is deemed to be included in the unit quoted rate

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A C Series with Breaking capacity 10KA all as directed.

Supply and laying GI Pipe of 40mm bore, light grade, (ISI Marked) for cable protection to be fixed on wall with necessary clamps or in road crossing, complete all as specified and as directed. (Rate quoted shall include the cost of MS clamps of required size)

S&F MCB DB, TPN, 4 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed.

S&F MCB, TPN, 10KA, 415V, "C" curve, 40 A, ISI marked complete all as specified and as directed.

S&F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S&F SPN DB, 6 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S&F Miniature circuit Breakers, SP, C-Series, 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and directed.

S&F Miniature Circuit Breakers, SPN, C-Series, 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and directed

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 15mm bore medium grade GI protection pipe (up to 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire mesh, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified including taking out the existing unserviceable earthing accessories. Note: On testing after completion, if the desired earth resistance is not obtained the earthing shall be redone at no extra cost till the entire satisfaction of Engr-in-Charge.

Supply and spreading clean M-sand for cushioning for protection of cable in trenches including filling, spreading and punning down to desired thickness complete all as specified and as directed. NOTE: Only punned thickness of sand shall be considered for payment purpose.

Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand complete all as specified and directed.

Supply and laying in trenches/through pipes or bore in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. LT UG Cable armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area 16 Sqmm 4 core all as specified and directed by the Engr-in-Charge.

Taking up or down 50mm bore GI steel tubing and connections from trenches/buildings, including cleaning for refixing or removal to stores complete all as specified and directed.

All as per item No 181 above but 25 mm bore

All as per item No 181 above but 20 mm bore

All as per item No 181 above but 15 mm bore

M&L for 50mm bore galvanised steel water tubing, medium grade with all fittings such as bend, tees, unions, elbows, connecting pieces etc., laid in trenches complete all as specified and directed.

All as per item No 185 above but 25 mm bore

All as per item No 185 above but 20 mm bore

All as per item No 185 above but 15 mm bore

S&F in repairs gun metal gate/globe valve conforming to IS 781-1984 with iron wheel head screwed both ends for iron pipe of 50 mm bore including taking down old unserviceable gate valve and testing complete all as specified and directed.

All as per item No 189 above but 25 mm bore

All as per item No 189 above but 20 mm bore

M&L for cutting the existing hard standing/PCC/WBM road for depth not less than 30cm and 30 cm in width for passing of GI pipe line/cable through GI pipe, returning, filling in, complete including finishing the top surfaces by providing 20 cm thick cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate on top and surface finished to a uniform smooth surface, bottom filled with excavated earth complete all as specified and directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20mm bore and taking down old unserviceable ball valves complete all as specified and as directed.

UNIQUE INDIA CONSTRUCTIONS