Construction of Multipurpose Building near Midalam Kurusadi in Midalam Village panchayat in Killiyoor Panchayat union. in Kanniyakumari District under MLACDS(Killiyoor) 2025-26

Amount

Construction of Multipurpose Building near Midalam Kurusadi in Midalam Village panchayat in Killiyoor Panchayat union.

Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete.,

Supplying and filling in foundation and basement with filling sand including water consolidating etc.,

Refilling in foundation and basement with excavated earth in layer of not more than 15cm thick

Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation inmcluding watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.

Brick work in cm 1:5 using country bricks ground moulded of size 23x11x7cm for the following including curing etc. complete complying with standard specification.

R.C.C 1:11/2:3 using 20mm meta for all RCC works including curing and providing fixtures like fan clamps in the RCC roof wherever necessary and bearing curfaces of walls sides and bottom at slabs etc

Below GL : Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grills for RCC works including cost of steel and binding wire etc., complete.

Above GL :Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grills for RCC works including cost of steel and binding wire etc., complete.

Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc.

Providing and applying one coat of Zinc oxide primer and two coats of Anti Corrosive paint of Colour as directed by engineer in charge complete as per technical specification in accordance with IRC 24-2010 and other relevant MoRT&H Specifications CI:1906 for structural stee

Weathering course with broken brick jeely for 20 mm size mixed with pure slacked lime (no sand to be used) in proposation of 32:12.5 cft to proper gradient,well beation with wooden beaters etc

Terrace flooring with one coarse of new machine pressed tiles of size 20x20x2 cm using CM 1:3 1 Cement ,3 M. Sand (conform to Table I IS 2116-1980) with water proofing compound 2% weight of cement used and the joints pointed with same mortar etc.,

Dadooing of walls with glazed tiles of size 15 cm x15cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 -10Sqm

Plastering with CM 1:5, 12mm thick in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Plastering with cement mortar 1:3, 10mm thick for all exposed surfaces of concrete in all floors including curing etc, complete complying with standard specifaction and as directed.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Supply and fixing doors and windows including all charges etc., complete as per standard specification.

Door D (1.10x2.10 )

Window W (1.20x1.30)

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Provision for Electrification arrengments with sevice connection

Fan point SD25

Light point SD25

Fan SOR SD 107

Plug point SD 38

Tube light SD 89

CFL Lamp

CFL lamp - BH fitting SD 80

DPI switch of 500 V SD 154

Service Wire SD 64

Bulk head fitting SD 83

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Painting two coats with exterior emulsion inculding cost and conveyance of all materials to site and all loboure charges etc complete ( outer wall )

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc.,

Labour charges for fixing doors alongwith frames in position etc., complete (finished work)

Labour charges for fixing window alongwith frames in position etc., complete (finished work)

European Water closet with "P" or "S" Trap with Double Flapped seat and seat cover with Brass Hinges and 10 litre capacity PVC low level flusing tank with all internal fittings Colour

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Provision for Pipe line Arrangement

110mm PVC Pipe

50mm PVC Pipe

110mm PVC bend

50mm PVC bend

50mm PVC coupling

25mm UPVC pipe

32mm UPVC pipe

63mm PVC pipe

63mm PVC bend

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}