Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹4.5 L
EMD Value
₹8,925
Closing Date
22 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer (Civil)
BSNL Civil Division,2nd Floor, Telephone Bhavan, Port Blair 744101
Repair Works to the Telephone Exchange Building, Garacharma, Port Blair (3rd Call).
2023_BSNL_148641_1
31/NIT/ CD-PB/AN/2022-23
Open Tender
Civil Works
Works
60 days
TElephone Exchange, Garacharma
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts Officer (Cash), BSNL, Port Blair
₹8,925
24 Mar 2023
13 Mar 2023
24 Mar 2023
13 Mar 2023
22 Mar 2023
13 Mar 2023
13 Mar 2023 - 21 Mar 2023
Amount
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:1½:3 (1 cement : 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Sal wood
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 100x58x1.90 mm
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete. 200x10 mm
Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete . 100 mm
Providing and fixing approved quality 25 mm thick PVC door shutter with frame of brand syntex or equvalent including all fixtures fittings etc complete as per the direction of the Engineer in Charge.
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.
Providing and fixing wind ties of 40x 6mm flat iron section.
Providing and fixing plain multipurpose cement board (High pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid separately). 6 mm thick Cement bonded wood particle board as per IS:14276
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. With cement mortar 1:4 (1 cement : 4 fine sand).
Special Structural repair works of disintegrated/ damaged RCC members such as Columns, Chajjas, Lintels, Beams, Slabs, fins etc as per the following process :
a) Relieving structural members like columns , beams , slab of their superimposed loads partially or fully based on the existing site condition and as directed by Engineer-in-charge , by providing adequate adjustable steel props , frames, etc.. and including providing adequate timber runners, planks, bracings, jacking arrangement and tubular steel scaffolding etc.. upto any height as per the site requirement and removal of same after the completion of restoration work of the structural member concerned.
b) Removal of all loose and disintegrated cement plaster , concrete from the structure by gentle tapping of the surface, upto the required depth till sound concrete is available including exposing the corroded reinforcing bars. Removal of the concrete in affected part, shall be such that it is removed 2-3 mm beyond the damaged bars, to enable to apply corrosion resistant coating.
c) The reinforcement shall be cleaned thoroughly with wire brush to remove the rust,dirt etc. and applying two coats of corrosion protection treatment for the existing steel reinforcement with Cerazinc ZR or equivalent as per the manufacturer's specification and placing adequate new reinforcement in position wherever required, as directed by the Engineer - in -Charge.
(d ) A bonding coat of cement slurry mixed with polymer based bonding additive of Ceralatex SBR or equivalent of mix 4 Kg cement + 0.5 kg polymer based bonding additive / Sqm area , shall be applied over the cleaned and dried old concrete surface. Operation under (e) below should be executed before setting time of this operation.
(e ) Building up of concrete section with polymer modified concrete of requisite thickness with a ratio 1:1:2 (1 cement: 1 river sand: 2 stone aggregate of nominal size 6mm to 12mm) mixed with polymer based bonding additive Ceralatex SBR or equivalent at 5 kg per bag of cement , including necessary operation of casting by dashing or hand packing or by shuttering to the requisite shape and size to achieve compact concrete section of the shape and size of RCC members.
f) Smooth finishing of the above surface with Cement mortar 1:3(1 cement:,3 fine sand) mixed with polymer based bonding additive ceralatex SBR or equivalent at, 2 kg/bag of cement.)
The rates includes all operations,materials and labour but excluding reinforcement. (All additives/ Admixtures/ coatings are to be utilised as stipulated in item or as per Manufacturers specifications)
upto 25mm thick
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :
(a) 3 mm thick
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge (a) In cement mortar
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead (a) Of area 3 sq. metres and below
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: (a) G.S. Sheet
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. (a) 10 litre capacity - White
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : (a) White solid plastic seat with lid
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (i) Flexible pipe (a) 32 mm dia
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall.
(a) 20 mm nominal outer dia. Pipes.
(b) 25 mm nominal outer dia .Pipes.
(c) 40 mm nominal outer dia .Pipes.
Providing and fixing uplasticised PVC connection pipe with brass unions : (i) 45 cm length (a) 15 mm nominal bore
Providing and fixing CPVC Ball Valve of approved quality and brand as directed by the Engineer-in-Charge.(a) 25 mm nominal bore
Providing and fixing CPVC Union of approved quality and brand as directed by the Engineer-in-Charge.(a) 25 mm nominal bore
Providing and fixing tank nipple of approved quality to the overhead/terrace PVC water storage tanks including cutting the tank walls and necessary solvent cement etc., complete as directed by the Engineer-in-Charge. (a) 25 mm nominal outer dia .Pipes.
Removing the damaged urinal basin etc., complete as directed by the Engineer-in-Charge.
Providing and fixing PTMT bib cock of approved quality and colour. (a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms.
Providing and fixing PTMT pillar cock of approved quality and colour . (a) 15mm nominal bore, 107 mm long. Weighing not less than 110 gms.
Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). (a) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. (a) Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (a) With float glass panes of 5.50 mm thickness
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (a) With stainless steel cover plate minimum 1.25 mm thickness.
Cutting of branches of tree with necessary scaffolding arrangements, safety precautions, etc., complete as directed by the Engineer-in-Charge.
Repairing of door/window shutters including removing the shutters, chiselling, planing the shutters & refixing the same in proper alignment, etc., complete as directed by the Engineer-in-Charge.
Dismantling of existing damaged Rolling shutters including removing side guide rails and holdfasts etc. complete and stacking within 50 metres lead : (a) Of area beyond 3 sq. metres
Providing scaffolding with bamboo props including dismantling as directed by the engineer in charge. (a) Single scaffolding
stage.html
html • 0.01 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .