Basic Arrangement for Water Supply Arrangement, Vessel Cleaning Area for Sanitary Worker Morning Breakfast Shed, Name Board and Banner for CM Breakfast Scheme for Madhuranthagam Area

Earth work excavation for foundation, septic tank etc., in all soil sand sub- soils (vide SI No:50+62) and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring, shuttering, bailing out water wherever necessary refilling the foundation with excavated earth other than sandy soil in layers of not more than 15 cm thick well rammed and depositing the surplus earth with in the compound in place shown by the departmental officers within an initial lead and lift and clearing and levelling the site etc.,complete - 1 M 3

Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying,nsolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete multiplying with standard specification and as directed by the departmental officers. The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers -Mixing by Manual means

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Supply and Delivery and Fixing of Roofing with Galvanised corrugated iron sheet of thickness 0.8mm with pan tiles over including Loading and Unloading Labour Charges etc., complete as per standard specificatins and as directed by the departmental officers

Precast Concrete Block masonry using Solid Concrete Blocks of size 400x200x150 mm of grade C (5.0) conforming to IS 2185 (Part 1) : 2005 with following cement mortar in accordance with IS 2572:2005 including mortar plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) - 20mm Thick

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means

Plastering the surface of walls with Cement Mortar 1:4 (One cement and Four plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used , curing etc., complete complying with standard specification and as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. - Internal water supply Above ground level.

Supply and delivery of PVC and GI specials including cost of conveyance all materials and transport charges etc. complete

25mm Coupler

25mm Elbow

25mm BEND

25mm Tee

32mm Coupler

32mm Elbow

32mm BEND

32mm Tee

80mm MS clamp

150mm End Cap

32mm GI adopter

32mm GI pipe Nipple

32mm GI Elbow

32mm Flange Set

32mm GI Hex Nipple

Nylone Rope

32mm GI Pipe

32mm GI Non Return Value

Supply and delivery of 1HP single phase wet type submersible pump set confirm to I.S. 8034 with ISI marking as per specification. The Motor fitted with pump should be suitable for insulation in 150mm dia bore well discharge of pump 20 LPM and head 80mts etc. complete as per standard specification. 20 X 70

Supply and delivery of HDPE PIPES FOR SUB-MERSIBLE PUMP IN BORE WELL Class-5 (1 MPa or 10 kg./cm2 pressure) including cost of conveyance of all materials and transport charge etc complete.

Supply and delivery of 2.5 Sq.mm Submersible PVC insulated and sheathed 3 core Flat type copper cable confirming to is 694/1990 ISI Mark etc. completed as per standard specification.

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

Labour charges for the erection of 1 HP submersible pump set in bore well including fixing and jointing and submersible cable with proper clamps up to the starter to the required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauge up to the exterior wall of the pump room and erection of panel board consisting of TPCIN switch starter, voltmeter, Ammeter 3 pilot (indicating) lamps, capacitor, single phasing prevented water level guard and laying and jointing the cable and twin earthing as per I.E. rules etc. complete and testing pump sets and trial run for 7 days.

Supply and delivery of Single phase 1HP Panel board with two level guard and auto start etc. complete as per Standard specification.

Supply and delivery and fixing of 1000 litres HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Add GST 18%