WORK OF 12 NOS INSTALLATION OF 250 KVA TRANSFORMER AT VARIOUS PLACES UNDER EUDD I AND V NOIDA

Amount

FOLLOWING WORK I/C OF EXISTING OVERLOAD 400 KVA T/F BY ADDITIONAL 250 KVA TRANSFORMER TO AT B-BLOCK, SECTOR-71, NOIDA IN THE AREA OF EUDSD-IV, UNDER EUDD-I, NOIDA :-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 11 KV TPMO Set (1 No.), 11 KV Fuse Set (01 No.), ACSR Dog Conductor (50 Mtrs.), 11 KV Pin Insulator with pins (6 Nos.), Earthing Rod complete (2 Nos.), Top Channel 100x50x2240 mm (1 No.), Dropper Channel 100x50x2028 mm (1 No.), T-off channel MS 100x50x1860mm (1 No.), 11 KV Disc. Insulator with fitting (6 Nos.), Stay set complete (2 Nos.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 3.5x400 Sq.mm. (20 Mtrs.) & 1x400 Sq.mm. (70 Mtrs.) LT XLPE Cable from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Fabrication & fixing of MS channel / Angle complete in all respects.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Double Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying of 3.5x400 Sq.mm. (20 Mtrs.) & 1x400 Sq.mm. (70 Mtrs.) LT XLPE Cable including fixing of all accessories as per RESPO schedule Complete in all respects.

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Providing of aluminium crimping lugs 3.5x400 Sq.mm. (20 Mtrs.) & 1x400 Sq.mm. (70 Mtrs.) LT XLPE Cable.

Fixing of above aluminium crimping lugs.

Painting of Double pole and structure with Alluminium Paint & Red Oxide Paint.

Providing and fixing of spacers with the binding wire in L.T. lines at site places.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA, Level-2 Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT MENTION S.NO. 1.00 PLACE AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of Number Plate.

Fixing of above Number Plate.

Providing of Danger board with clamps.

Fixing of above Danger board with clamps.

Providing of off size MS Holding clamps for ST pole with bolts & nut.

Fixing of above off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

Providing and installation of LT ACB DOUBLE CIRCUIT 800 Amp. with structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-

800 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 400/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

Water level earthing of ACB with M.S. earhting strips of best quality (ISI mark) as per RESPO norms complete in all respects. (All material wiil be provided by the contractor for Earthing)

Providing of 11 KV TPMO set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV TPMO Set with required items complete in all respect.

Providing of 11 KV Fuse set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV Fuse Set with required items complete in all respect.

FOLLOWING WORK I/C OF EXISTING OVERLOAD 400 KVA T/F BY ADDITIONAL 250 KVA TRANSFORMER TO AT TIKONA PARK, NEAR GAUSHALA IN VILLAGE SORKHA IN THE AREA OF EUDSD-IV, UNDER EUDD-I, NOIDA :-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of PCC poles 8.5 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 3x120 Sq.mm. LT ABC Cable Complete from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as ACSR Dog Conductor (60 Mtrs.), 11 KV Pin Insulator with pins (6 Nos.), Top Channel 100x50x2240 mm (1 No.), MS Dropper Channel 100x50x2028 mm (2 No.), T-off channel MS 100x50x1860mm (2 No.), 11 KV Disc. Insulator with fitting (6 Nos.), Stay set complete (4 Nos.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Fabrication & fixing of MS channel / Angle complete in all respects.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Single support on 8.5 Mtr. long PCC Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Erection of Double Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Providing of Earthing of 20x2500 mm as per site requirement for completion of work.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying Lifting and final Binding, Sagging of LT AB Cable size 3x120 including fixing of all accessories as per RESPO schedule Complete in all respects.

Providing of suspension Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above suspension Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Painting of Double pole and structure with Alluminium Paint & Red Oxide Paint.

Providing and fixing of spacers with the binding wire in L.T. lines at site places.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA level 2 Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 02 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT MENTION S.NO. 2.00 PLACE AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 2.5x2.5x2.5 Mtr. for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of off size MS Holding clamps for ST pole with bolts & nut.

Fixing of above off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

FOLLOWING WORK I/C OF EXISTING OVERLOAD 400 KVA T/F BY ADDITIONAL 250 KVA TRANSFORMER TO AT NEAR SHIV MANDIR IN VILLAGE PARTHALA IN THE AREA OF EUDSD-IV, UNDER EUDD-I, NOIDA :-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of PCC poles 8.5 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 3x120 Sq.mm. LT ABC Cable Complete from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as ACSR Dog Conductor (60 Mtrs.), 11 KV Pin Insulator with pins (6 Nos.), Top Channel 100x50x2240 mm (1 No.), MS Dropper Channel 100x50x2028 mm (2 No.), T-off channel MS 100x50x1860mm (2 No.), 11 KV Disc. Insulator with fitting (6 Nos.), Stay set complete (4 Nos.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Fabrication & fixing of MS channel / Angle complete in all respects.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Single support on 8.5 Mtr. long PCC Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Erection of Double Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Providing of Earthing of 20x2500 mm as per site requirement for completion of work.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying Lifting and final Binding, Sagging of LT AB Cable size 3x120 including fixing of all accessories as per RESPO schedule Complete in all respects.

Providing of suspension Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above suspension Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Painting of Double pole and structure with Alluminium Paint & Red Oxide Paint.

Providing and fixing of spacers with the binding wire in L.T. lines at site places.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA level 2 Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 02 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT MENTION S.NO. 3.00 PLACE AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 2.5x2.5x2.5 Mtr. for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of off size MS Holding clamps for ST pole with bolts & nut.

Fixing of above off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

FOLLOWING WORK I/C OF EXISTING OVERLOAD 400 KVA T/F BY ADDITIONAL 250 KVA TRANSFORMER TO AT GALI NO.-8, NEAR FEEDER NO.-5 EMANATING FROM 33/11 KV S/S SECTOR-67, NOIDA IN THE AREA OF EUDSD-IV, UNDER EUDD-I, NOIDA :-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 11 KV TPMO Set (1 No.), 11 KV Fuse Set (01 No.), ACSR Dog Conductor (60 Mtrs.), 11 KV Pin Insulator with pins (9 Nos.), Earthing Rod complete (2 Nos.), Top Channel 100x50x2240 mm (1 No.), Dropper Channel 100x50x2028 mm (1 No.), T-off channel MS 100x50x1860mm (1 No.), 11 KV Disc. Insulator with fitting (6 Nos.), Stay set complete (2 Nos.), Transformer base angle (02 Nos.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 3.5x400 Sq.mm. LT XLPE Cable from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Fabrication & fixing of MS channel / Angle complete in all respects.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Double Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying of 3.5x400 Sq.mm. LT XLPE Cable including fixing of all accessories as per RESPO schedule Complete in all respects.

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Providing of aluminium crimping lugs 3.5x400 Sq.mm. LT XLPE Cable.

Fixing of above aluminium crimping lugs.

Painting of Double pole and structure with Alluminium Paint & Red Oxide Paint.

Providing and fixing of spacers with the binding wire in L.T. lines at site places.

Construction of new distribution 250 KVA T/F Plinth chair type. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with M.S. Channel. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA, Level-2 Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT MENTION S.NO. 4.00 PLACE AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of Number Plate.

Fixing of above Number Plate.

Providing of Danger board with clamps.

Fixing of above Danger board with clamps.

Providing of off size MS Holding clamps for ST pole with bolts & nut.

Fixing of above off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

Providing of 11 KV TPMO set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV TPMO Set with required items complete in all respect.

Providing of 11 KV Fuse set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV Fuse Set with required items complete in all respect.

FOLLOWING WORK I/C OF EXISTING OVERLOAD 400 KVA T/F BY ADDITIONAL 250 KVA TRANSFORMER TO AT B-BLOCK, BEHIND HP PETROL PUMP, SECTOR-71, NOIDA IN THE AREA OF EUDSD-IV, UNDER EUDD-I, NOIDA :-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 11 KV TPMO Set (1 No.), 11 KV Fuse Set (01 No.), ACSR Dog Conductor (50 Mtrs.), 11 KV Pin Insulator with pins (6 Nos.), Earthing Rod complete (2 Nos.), Top Channel 100x50x2240 mm (1 No.), Dropper Channel 100x50x2028 mm (1 No.), T-off channel MS 100x50x1860mm (1 No.), 11 KV Disc. Insulator with fitting (6 Nos.), Stay set complete (2 Nos.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 3.5x400 Sq.mm. (20 Mtrs.) & 1x400 Sq.mm. (70 Mtrs.) LT XLPE Cable from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Fabrication & fixing of MS channel / Angle complete in all respects.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Double Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying of 3.5x400 Sq.mm. (20 Mtrs.) & 1x400 Sq.mm. (70 Mtrs.) LT XLPE Cable including fixing of all accessories as per RESPO schedule Complete in all respects.

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Providing of aluminium crimping lugs 3.5x400 Sq.mm. (20 Mtrs.) & 1x400 Sq.mm. (70 Mtrs.) LT XLPE Cable.

Fixing of above aluminium crimping lugs.

Painting of Double pole and structure with Alluminium Paint & Red Oxide Paint.

Providing and fixing of spacers with the binding wire in L.T. lines at site places.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA, Level-2 Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT MENTION S.NO. 5.00 PLACE AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of Number Plate.

Fixing of above Number Plate.

Providing of Danger board with clamps.

Fixing of above Danger board with clamps.

Providing of off size MS Holding clamps for ST pole with bolts & nut.

Fixing of above off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

Providing and installation of LT ACB DOUBLE CIRCUIT 800 Amp. with structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-

800 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 400/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

Water level earthing of ACB with M.S. earhting strips of best quality (ISI mark) as per RESPO norms complete in all respects. (All material wiil be provided by the contractor for Earthing)

Providing of 11 KV TPMO set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV TPMO Set with required items complete in all respect.

Providing of 11 KV Fuse set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV Fuse Set with required items complete in all respect.

FOLLOWING WORK I/C OF EXISTING OVERLOAD 400 KVA T/F BY ADDITIONAL 250 KVA TRANSFORMER TO AT C-BLOCK, SECTOR-71, NOIDA IN THE AREA OF EUDSD-IV, UNDER EUDD-I, NOIDA :-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 11 KV TPMO Set (1 No.), 11 KV Fuse Set (01 No.), ACSR Dog Conductor (50 Mtrs.), 11 KV Pin Insulator with pins (6 Nos.), Earthing Rod complete (2 Nos.), Top Channel 100x50x2240 mm (1 No.), Dropper Channel 100x50x2028 mm (1 No.), T-off channel MS 100x50x1860mm (1 No.), 11 KV Disc. Insulator with fitting (6 Nos.), Stay set complete (2 Nos.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 3.5x400 Sq.mm. (20 Mtrs.) & 1x400 Sq.mm. (70 Mtrs.) LT XLPE Cable from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Fabrication & fixing of MS channel / Angle complete in all respects.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Double Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying of 3.5x400 Sq.mm. (20 Mtrs.) & 1x400 Sq.mm. (70 Mtrs.) LT XLPE Cable including fixing of all accessories as per RESPO schedule Complete in all respects.

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Providing of aluminium crimping lugs 3.5x400 Sq.mm. (20 Mtrs.) & 1x400 Sq.mm. (70 Mtrs.) LT XLPE Cable.

Fixing of above aluminium crimping lugs.

Painting of Double pole and structure with Alluminium Paint & Red Oxide Paint.

Providing and fixing of spacers with the binding wire in L.T. lines at site places.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA, Level-2 Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT MENTION S.NO. 6.00 PLACE AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of Number Plate.

Fixing of above Number Plate.

Providing of Danger board with clamps.

Fixing of above Danger board with clamps.

Providing of off size MS Holding clamps for ST pole with bolts & nut.

Fixing of above off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

Providing and installation of LT ACB DOUBLE CIRCUIT 800 Amp. with structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-

800 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 400/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

Water level earthing of ACB with M.S. earhting strips of best quality (ISI mark) as per RESPO norms complete in all respects. (All material wiil be provided by the contractor for Earthing)

Providing of 11 KV TPMO set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV TPMO Set with required items complete in all respect.

Providing of 11 KV Fuse set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV Fuse Set with required items complete in all respect.

FOLLOWING WORK I/C OF EXISTING OVERLOAD 400 KVA T/F BY ADDITIONAL 250 KVA TRANSFORMER TO AT NEAR NARESH MURTI IN VILLAGE SORKHA IN THE AREA OF EUDSD-IV, UNDER EUDD-I, NOIDA :-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of PCC poles 8.5 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 3x120 Sq.mm. LT ABC Cable Complete from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as ACSR Dog Conductor (60 Mtrs.), 11 KV Pin Insulator with pins (6 Nos.), Top Channel 100x50x2240 mm (1 No.), MS Dropper Channel 100x50x2028 mm (2 No.), T-off channel MS 100x50x1860mm (2 No.), 11 KV Disc. Insulator with fitting (6 Nos.), Stay set complete (4 Nos.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Fabrication & fixing of MS channel / Angle complete in all respects.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Single support on 8.5 Mtr. long PCC Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Erection of Double Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Providing of Earthing of 20x2500 mm as per site requirement for completion of work.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying Lifting and final Binding, Sagging of LT AB Cable size 3x120 including fixing of all accessories as per RESPO schedule Complete in all respects.

Providing of suspension Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above suspension Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Painting of Double pole and structure with Alluminium Paint & Red Oxide Paint.

Providing and fixing of spacers with the binding wire in L.T. lines at site places.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA level 2 Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 02 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT MENTION S.NO. 7.00 PLACE AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 2.5x2.5x2.5 Mtr. for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of off size MS Holding clamps for ST pole with bolts & nut.

Fixing of above off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

FOLLOWING WORK INSTALLATION OF NEW 250 KVA TRANSFORMER AT SECTOR-122 NEAR SHARAMIK KUNJ NOIDA GB NAGAR IN THE AREA OF EUDSD-IV, UNDER EUDD-I, NOIDA :-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of PCC poles 8.5 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 3x120 Sq.mm. LT ABC Cable Complete from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as ACSR Dog Conductor (45 Mtrs.), 11 KV Pin Insulator with pins (6 Nos.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Top Channel 100x50x2240 mm (1 No.), MS Dropper Channel 100x50x2000 mm (2 No.), T-off channel MS 100x50x1860mm (2 No.) as per site requirement for completion of work.

Providing of 11 KV Disc. Insulator with fitting as per site requirement for completion of work.

Providing of Stay set complete as per site requirement for completion of work.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Fabrication & fixing of MS channel / Angle complete in all respects.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Single support on 8.5 Mtr. long PCC Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Erection of Double Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Providing of Earthing of 20x2500 mm as per site requirement for completion of work.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying Lifting and final Binding, Sagging of LT AB Cable size 3x120 including fixing of all accessories as per RESPO schedule Complete in all respects.

Providing of suspension Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above suspension Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Painting of Double pole and structure with Alluminium Paint & Red Oxide Paint.

Providing and fixing of spacers with the binding wire in L.T. lines at site places.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA level 2 Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 02 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT MENTION S.NO. 8.00 PLACE AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 2.5x2.5x2.5 Mtr. for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of off size MS Holding clamps for ST pole with bolts & nut.

Fixing of above off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

FOLLOWING WORK INSTALLATION OF NEW 250 KVA T/F AT VILLAGE HAZIPUR, 5% FRON OF DASA PRAKASH HOTEL, NOIDA GB NAGAR IN THE AREA OF EUDSD-VIII, NOIDA UNDER EUDD-V, NOIDA:-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as ACSR Dog Conductor (60 Mtrs.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 3x120+1x95+1x16 Sq.mm. LT ABC Cable Complete from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as LT LEAD 1x250 Sq.mm. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Laying Lifting and final Binding, Sagging of LT AB Cable size 3x120+1x95+1x16 Sq.mm. including fixing of all accessories as per RESPO schedule Complete in all respects.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Single Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Providing of Earthing of 20x2500 mm as per site requirement for completion of work.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying of 1x250 Sq.mm. LT Lead including fixing of all accessories as per RESPO schedule Complete in all respects.

Providing of aluminium crimping lugs suitable for 1x250 Sq.mm. LT Lead.

Fixing of above aluminium crimping lugs.

Erection of Single Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Fixing of above suspension Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Providing and fixing of spacers with the binding wire in L.T. lines at site places.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA, Level-2 Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT MENTION S.NO. 9.00 PLACE AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of off size MS Holding clamps for ST pole with bolts & nut.

Fixing of above off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

Providing and installation of LT ACB DOUBLE CIRCUIT 800 Amp. with structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-

800 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 400/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

Water level earthing of ACB with M.S. earhting strips of best quality (ISI mark) as per RESPO norms complete in all respects. (All material wiil be provided by the contractor for Earthing)

FOLLOWING WORK INSTALLATION OF NEW 250 KVA T/F AT VILLAGE GEJHA (HAZIPUR), NEAR BARAT GHAR NOIDA GB NAGAR IN THE AREA OF EUDSD-VIII, NOIDA UNDER EUDD-V, NOIDA:-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as ACSR Dog Conductor (60 Mtrs.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 3x120+1x95+1x16 Sq.mm. LT ABC Cable Complete from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as LT LEAD 1x250 Sq.mm. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Laying Lifting and final Binding, Sagging of LT AB Cable size 3x120+1x95+1x16 Sq.mm. including fixing of all accessories as per RESPO schedule Complete in all respects.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Single Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Providing of Earthing of 20x2500 mm as per site requirement for completion of work.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying of 1x250 Sq.mm. LT Lead including fixing of all accessories as per RESPO schedule Complete in all respects.

Providing of aluminium crimping lugs suitable for 1x250 Sq.mm. LT Lead.

Fixing of above aluminium crimping lugs.

Providing of suspension Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above suspension Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Providing and fixing of spacers with the binding wire in L.T. lines at site places.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA, Level-2 Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT MENTION S.NO. 10.00 PLACE AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of off size MS Holding clamps for ST pole with bolts & nut.

Fixing of above off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

Providing and installation of LT ACB DOUBLE CIRCUIT 800 Amp. with structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-

800 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 400/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

Water level earthing of ACB with M.S. earhting strips of best quality (ISI mark) as per RESPO norms complete in all respects. (All material wiil be provided by the contractor for Earthing)

FOLLOWING WORK INSTALLATION OF NEW 250 KVA T/F AT SHRI RAM HOSPITAL, PRAHALAD COLONY, VILLAGE BAROLA NOIDA GB NAGAR IN THE AREA OF EUDSD-VIII, NOIDA UNDER EUDD-V, NOIDA:-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of PCC poles 8.5 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as ACSR Dog Conductor (60 Mtrs.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 3x120+1x95+1x16 Sq.mm. LT ABC Cable Complete from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as LT LEAD 1x250 Sq.mm. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Laying Lifting and final Binding, Sagging of LT AB Cable size 3x120+1x95+1x16 Sq.mm. including fixing of all accessories as per RESPO schedule Complete in all respects.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Single support on 8.5 Mtr. long PCC Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Erection of Single Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Providing of Earthing of 20x2500 mm as per site requirement for completion of work.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying of 1x250 Sq.mm. LT Lead including fixing of all accessories as per RESPO schedule Complete in all respects.

Providing of aluminium crimping lugs suitable for 1x250 Sq.mm. LT Lead.

Fixing of above aluminium crimping lugs.

Providing of suspension Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above suspension Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Providing and fixing of spacers with the binding wire in L.T. lines at site places.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA, Level-2 Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT MENTION S.NO. 11.00 PLACE AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of off size MS Holding clamps for ST pole with bolts & nut.

Fixing of above off size MS Holding clamps for ST pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

Providing and installation of LT ACB DOUBLE CIRCUIT 800 Amp. with structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-

800 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 400/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

Water level earthing of ACB with M.S. earhting strips of best quality (ISI mark) as per RESPO norms complete in all respects. (All material wiil be provided by the contractor for Earthing)

FOLLOWING WORK INSTALLATION OF NEW 250 KVA LT SUB STATION IN JHUGGI JHOPDI AREA SECTOR-9 NOIDA NEAR I-62, SECTOR-9, NOIDA IN THE AREA OF EUDSD-IX, NOIDA UNDER EUDD-V, NOIDA:-

Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of PCC poles 8.5 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 11 KV TPMO Set (1 No.), ACSR Dog Conductor (50 Mtrs.), 11 KV Pin Insulator (12 Nos.), 11 KV Pin with nut (12 Nos.), 3 Phase Distribution Box with clamp (15 Nos.), Earthing Rod complete (2 Nos.), Stay set complete (2 Nos.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 1x250 Sq.mm. LT PVC Lead from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Cartage of other line material such as 3x120 Sq.mm. LT ABC Cable Complete from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.

Providing of Stone Pad 300x300x75 mm.

Fixing of above Stone Pad 300x300x75 mm.

Providing of MS Channel 125x65x1300mm (T-off) as per site requirement for completion of work.

Providing of 11 KV Disc. Insulator Y&C Type 4500 KG with fitting as per site requirement for completion of work.

Fabrication & fixing of MS channel / Angle complete in all respects.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Erection of Single support on 8.5 Mtr. long PCC Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Erection of Single Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm (with 40 mm. taper extra) in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying Lifting and final Binding, Sagging of LT AB Cable size 3x120 Sq.mm. including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying of 1x250 Sq.mm. LT PVC Lead including fixing of all accessories as per RESPO schedule Complete in all respects.

Providing of suspension Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above suspension Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Piercing Clamps suitable for 3x120 Sq.mm. ABC.

Providing of Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Fixing of above Dead End Clamps suitable for 3x120 Sq.mm. ABC.

Grouting & Concreting of stay rod 1800x16 mm complete in all respect as per RESPO schedule Complete in all respects.

Fixing, Tighting and nozzling of stay wire with the pole of required tension with clamps as per RESPO schedule Complete in all respects.

Providing of aluminium crimping lugs suitable for 1x250 Sq.mm. LT PVC Lead.

Fixing of above aluminium crimping lugs.

Providing and fixing of spacers with the binding wire in L.T. lines at site places.

Construction of new distribution 250 KVA T/F Plinth chair type. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with M.S. Channel. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and proper curing complete with all respects as per RESPO schedule.

Safe loading and carriage of 250 KVA, Level-2 Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends

Mounting, installation of 250 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT MENTION S.NO. 12.00 PLACE AS PER FOLLOWING :-

Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)

Providing of Danger board with Barbed wire and clamps.

Fixing of above Danger board with Barbed wire and clamps.

Fixing of 3 Phase Distrubution Boxes on the LT poles including all clamps & material required for mounting, connections & sealing complete in all respect.

Providing of Pad Lock for locking arrangement of 3 Pahse Distribution Box.

Fixing of above Pad Lock for locking arrangement on 3 Pahse Distribution Box.

Providing of MS Clamps for 3 Phase Distribution Box with nuts & bolts.

Fixing of above MS Clamps for 3 Phase Distribution Box with nuts & bolts.

Providing of off size MS Holding clamps for ST/PCC pole with bolts & nut.

Fixing of above off size MS Holding clamps for ST/PCC pole with bolts & nut.

Providing of MS Bolts & Nuts.

Fixing of above MS Bolts & Nuts.

Providing and installation of LT ACB 800 Amp. with structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-

800 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 400/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

Water level earthing of ACB with M.S. earhting strips of best quality (ISI mark) as per RESPO norms complete in all respects. (All material wiil be provided by the contractor for Earthing)

Providing of 11 KV TPMO set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV TPMO Set with required items complete in all respect.

Providing of 11 KV Fuse set complete of best quality as per requirement for completion of work due to not available in store.

Installation of above 11 KV Fuse Set with required items complete in all respect.

M/S PRAKHAR ELECTRIC WORK

PACHOURI ELECTRICALS