PROVN OF RATION STORE FOR 800 PERSONNEL UNDER THE AOR OF GE DEOLALI

Amount

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft /loose soil

Removal of surplus excavated soil to a distance exc 250 m but not exc 500m and depositing as directed at a level n exc 1.5m from the starting point.

Excavating in trenches , n' exc 1.5m wide and n'exc. 1.5m in depth for foundation , etc. or for shaft ,wells and cesspits in soft/loose soil etc complete all as specified and directed .

Ditto all as per Item No 3 above but in hard dense soil etc complete all as specified and directed .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm etc complete all as specified and directed .

M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area etc complete all as directed .

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) etc complete all as specified and directed .

M&L for hardcore of broken or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed .

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm grade stone aggregate as in foundation concrete

M&L RCC design mix in M-25 (20 mm graded aggregate) Concrete as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete specified and directed .

All as per item above but in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed .

M&L for RCC design mix in M-25 (20 mm graded aggregate) Columns, pillars, piers, posts and struts etc complete all as specified and directed .

M&L for RCC design mix in M-25 (20 mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed . (Note :- for items 11 to 15 Formwork and reinforcement shall be measured and paid separately)

M&L for precast concrete 1:2:4 type B-1 (using 20mm graded stone aggregate)in manholes covers set in CM 1:4 including necessary form work (Note :-Reinforcement will be measured and paid separately) including necessary form work etc complete all as specified and as directed.

M&L for fly ash brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as specified and directed.

M&L for Cutting chases in brick masonry walls built in cement mortor for concealed water tubing or concealed conduit wiring, etc., and making good in CM 1:3, cutting not exc 10 cm girth etc complete all as specified and directed.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and directed .

M&L for providing formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n. exc 200m thick (Horizontal or sloping) all as specified and directed .

M&L for providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L for providing formwork to sides of pillars, posts, struts, piers, columns, and stanchions all as specified and directed .

Providing formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide etc complete all as specified and directed.

S&F 2nd class hardwood 30mm thick skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats etc complete all as specified and directed.

S&F 2nd class hardwood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed.

S&F 200 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as specified and directed.

S&F aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long etc complete all as specified and directed.

S & F 100mm size Butt hinges, medium weight, cold rolled mild steel, and fixed etc complete all as specified and directed.

S&F 150 mm long extruded anodized aluminum alloy handles, fabricated type, etc complete and directed.

S&F powder coated aluminium alloy curtain rails 20mm dia fixed to required lenghts etc complete all as specified and directed.

S&F brass chromium plated curtain rails brackets fancy type for 20mm dia curtain rails etc complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S&F Mild steel of conforming to Fe 290 grade E-165 as framed work (Angles ,Flat Iron, square/round bars) with ends of bars shouldred and/or rivetted or forged into spikes for window grills/framed guard bars to the design and pattern of ornamental and intricate as approved etc complete all as speciified and drected.

S&F mild steel TMT steel bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Ditto as above item no. 32 but 6mm to 8mm dia etc complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed.

M&L for 1.25mm thick mild steel pressed steel frames of size 125x60mm for doors, double rebates incl necessary fixing lugs, 06 Nos 100mm size stainless steel (03 Nos for each shutter), lock strike plate, filling the hollow portions of steel frame with PCC 1:3:6 type C-0 (12.5 graded stone aggregate) etc. complete all as specified and directed.

M&L 10mm thick bedding layer in CM 1:4 on roof top surfaces mixed with integral WPC 2% by weight of cement and finishing the same even and smooth without using extra cement etc complete all as specified and directed. (WPC will be measured and paid saperately.)

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sq.M ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg / Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer's iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesble roof surfaces complete all as per manufacturer's instructions and as directed .

M&L for machine cut hand dressed to true square/rectangles of uniform size kota stone slab flooring 18-20mm thick of size 400/450mm x 550/600mm laid in floors with and including 15mm thick CM 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing etc complete all as specified and directed.

All as per item no 39 above but prepolished stones in skirtings 100mm high with and including 10mm thick CM 1:4 backing coat etc complete all as specified and directed.

M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick as in subbase all as specified and directed.

M&L PCC 1:3:6 type C-1 (20 mm graded aggregate) 40mm thick laid in slope of 1:20 and alternate bays incl finished even and smooth without using extra cement all as specified and directed .

M&L for bitumastic filling in joints comprising of 1 part of heated bitumen 85/25 or 90/100 grade and 3 part of sand (all the wt) all as specified and directed .

M & L for 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth with a thin layer of sagol etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 mixed with water proofing compound on brick or concrete surface (Note :- WPC will be measured and paid separately) finishing the surface even and smooth with using extra cement etc complete all as specified and as directed.

Supply only integral water proofing compound of approved make all as specified and directed .

M&L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a 2 mm thick coat of birla white cement putty,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as specified and directed.

M&L for Preparation of new surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.

M&L for preparation of newly plastered surface and applying three coats of white wash on ceiling etc complete all as directed

S & F 4.00 mm thick sheet glass fixed with oil putty in squaresexc 0.5 sqm iin each pane fixed in window shutters etc complete all as specified and directed.

S & F 4.00 mm thick figured glass pin headed type and glazing with oil putty in squares n exc 0.5 sqm in each pane etc complete all as specified and directed.

M & L for preparation of new steel surfaces exc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer etc complete all as specified and directed.

Supply and lay cable XLPE insulated Heavy duty screanedPVC bedded, galvanized steelstrip or wire armoured, electric power cable 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core.

Supply & lay common bournt Sub Class B Brick laid over sand caushioning for mechanical protection

M&L for Sand cushioning to under ground cable with layer of sand 8 cm deep before laying and after laying 13 Cm Above the cabe. Note Punned thickness 18 CM wii be measured.

S & F Steel pipe glavanized grade of 40 mm Dia laid in trenches or under ground/floor or road of fixed with pole for protection of cable including clams with bolts nuts and wasers complete as as specifed.

M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cable and one single core 1.5 sqmm size copper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters in and including cover plate etc. fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:-

(a) One light point controlled by one switch

(b) One fan point (Ceiling, wall and Exhaust) controlled by one switch

(c) One 5 pin, 5 A socket outlet on the same board

(d) One 5 pin, 5 A socket outlet on the independent board.

All as per item No above here-in-before but with two 2.5 sqmm size cables as phase and neutral and one 2.5 sqmm size cable as earth continuity conductor for one 15 Amps socket outlet independent -ditto-

Modular type switch, 1 way,10 Amps, 1 module

Modular type socket, 2 & 3 pin combined, 10 Amps, 2 module

Modular type switch, 1 way, 16 Amps, 1 module

Modular type socket, 3 pin, 16 Amps / 20 Amps combined, 2 module

Electronic step regulator (Modular type) (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watts

M&L for lamp holder PVC cased body bakelite (white) back plate for batten fitting with LED Lamp 10W

M/L for ceiling rose surface bakeletile.

S & F Fan regulator electronic switch type AC 240 Volts, 5 Step 120 Watt encluding Connection

Supply and fixing ceiling fan 1200 mm sweep, Ac 230 V sngle phase white color with necessary claps and electric connection up to ceilingrose all as specified and directed.

Supply and fixing Exhaust fan heavy duty 300 mm sweep, Ac 230 V, 900 RPM sngle phase Metal body with necessary claps and electric connection up to ceilingrose all as specified and directed. Make:- Havells turbojet SP or equvalant from Wipro/Philips/ Bajaj.

S&F surface/wall mounted LED Light fittings, regal Batten Double side for LED Tube suitable for T8 LED 4 feet long lamp, with 18 W LED, with suitable driver complete all as specified and as directed. Make: Havells (Cat No: REGALBATTENT8UPTO1X22WDSBSWH + CRYSTAL1213T8DSTL18WLED865SGLASS) ) or equivalent in Wipro/Philips / Bajaj

S&F wall mounted LED Light fittings, 2 feet long, with 9 W LED and suitable driver complete all as specified and as directed. Make: Havells (Cat No:LUMILINEBS9WLED865SPPCWH) ) or equivalent in Wipro/Philips / Bajaj

S&F double doorwith IP-43 Protection , metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position on wall and surface positioN complete all as specified and directed.

S& F MCB SPN 6 to 40 Amps 240 Volt.

S & F MCB SP 6 to 32 Amps 240 Volt.

Earthing complete with galvanised Mild steel earth plate electrode size 600 x600x6 mm thick buried directly in ground (preferably in vertical position earth pit not less than 2.25 mtr below normal ground level with top edge of the earth plate not less than 3 mm (BGL) connected to galvanised iron earth wire 4 mm dia by means bolts, nuts check nuts including PCC pit in RCC 1:2:4 type B-I, 20 mm bore medium grade, GI water tubing fixed with CI funnel wire mesh 15 mm light grade for protection pipe including charcoal common salt complete all as specified in EP No 5 of SSR -1991 Part-I connected to test complete all as specified and directed.

Supply & Fix building security ight 35W LED energy saving Luminaire With high Power LED as light Source, Symmetric type including required GI bracket size of 40mm dia,accessories, clamps and eletric connections complete all as specified and as directed. Make : Havells(CatNoENDURACITYLITEPLANTPLUSSL35WLED757SASYBOPC) Or eqvt from Wipro/Philips/ Bajaj.

Note: Amount of sch of credit of Rs.Nil will be deducted from total amount of BOQ.

M/S YOGESH CONSTRUCTION

SIDDHIVINAYAK ENTERPRISES

M/S R.K.S. CONSTRUCTION