REPAIRS TO FLOORING, DADO, KOTA STONE, GRANITE ETC IN OTHER THAN HOSPITAL BLDGS AT INHS ASVINI

Amount

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land. Note: The place of disposal shall be find out by the contractor.

Dismantling floor, hearth or wall tiling including cement mortar bedding and backing coat of any thickness and rubbish off the premises. Note: The place of disposal shall be find out by the contractor.

M&L for machine cut, machine polished granite slab 20 mm thick in flooring set, jointed in cement slurry and pointed in cement slurry mixed with pigment to match with shade of stone laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified .

M&L for machine cut, machine polished granite tiles 20 mm thick in risers of steps, skirting, dado and pillar set, jointed in cement paste and pointed in cement slurry mixed with pigment to match with shade of stone laid over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified

M&L for 20 to 25 mm thick machine cut machine polished kota stone slab in flooring of any size set, jointed in cement slurry and pointed in cement slurry mixed with pigment to match with shade of stone laid over and including screed bed of 20mm thick in cm (1:6) including rubbing and polishing as specifed in SSR part I complete all as specified.

M&L for 20 to 25 mm thick machine cut machine polished kota stone slab of any size in risers of steps, skirting, dado and pillar set, jointed in cement paste and pointed in cement slurry mixed with pigment to match with shade of stone laid over and including 10 mm thick backing coat in cement mortar (1:4) including rubbing and polishing as specifed in SSR part I complete all as specified

M&L for 100 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in hard standing and finished even and smooth including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified.

M&L for vitrified ceramic tiles of size 600 mm x 600 mm x 9 to 10 mm thick of approved colour in flooring set, jointed in cement slurry and pointed in cement slurry mixed with pigment to match with shade of tile laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified

M&L for non skid ceramic tiles of size 300 mm x 300 mm x 6 to 7 mm thick of approved colour in flooring set, jointed in cement slurry and pointed in cement slurry mixed with pigment to match with shade of tile laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified

M&L for glazed ceramic tiles of size 300 mm x 450 mm x 6 to 7 mm thick of approved colour in skirting/dado set and jointed in neat cement paste mixed with pigment to match the shade of tile and pointed in neat cement slurry mixed with pigment to match the shade of tile laid over and including backing coat 10 mm thick in cement mortar (1:4) complete all as specified.

S&F 15 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings or laid in floors with suitable size GI clamps including taking down old GI tubing including fittings complete all as specified.

Ditto- as per item No 12.00 above but 20mm bore

S&F 15 mm bore bib tap, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified.

S&F stop valve of PTMT any colour screwed for iron pipe and fixed with 15 mm pipe (minimum weight 90 gms) complete all as specified..

S&F in repairs 15 mm bore angle cock, cast copper alloy, fancy type chromium plated screwed down, high pressure , with lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipes or union complete all as specified.

S&F in repairs 15 mm bore pillar taps, cast copper alloy, fancy type chromium plated screwed down, high pressure , with lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed type complete all as specified..

S&F in repairs 125 mm dia shower rose, brass chromium plated with swivel joints and fixing to 15 mm bore steel water tubing complete all as specified.

S&F in repairs PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joint fixed to wall with suitable size PVC clamps by maintaining 30 mm clear gap between finished wall surface complete all as specified .

S&F in repairs PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring jointlaid in floor or trenches complete all as specified .

S & F 75 mm bore PVC(SWR) bend any radius, diminishing pieces or tapers (Large bore will be measured) with rubber ring joints.

S & F in repairs Cast iron floor trap, with grating including jointing to waste pipe with and including run lead and fixed in cement concrete type B-1 (1:2:4), diameter of outlet 100 mm.

S & F in repairs CI floor trap with grating including jointing to waste pipe fixed in cement concrete 1: 2: 4 type B1, diameter of outlet 75 mm bore.

S & F in repairs vitreous china wash down water closet pan (Padestal pattern) coloured, including matching plastic sheet cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodized hinging device complete all as specified.

S & F in repairs health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS hook including making all connections and fixed in position complete all as specified.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rest (excluding flushing Cistern, flush pipe etc) including 'P' or S trap and provision of lime concrete bedding complete all as specified.

S&F in repairs low level PVC flushing cistern (coloured) of heavy duty, 10 Ltrs capacity, syphonic action type complete with inlet, ball valve, float and handle including cast iron bracket and 32 mm bore PVC flush pipe and connecting to WC complete all as specified.

S&F in repairs wash hand basin vitreous china flat black type of size 630 mm x 450 mm coloured, CI brackets and 32 mm dia PVC waste coupling including cutting for and pining in ends of bracket and connecting up supply pipes, waste or taps complete all as specified

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S&F in repairs PVC waste pipe 40mm bore 90 cm long with waste coupling complete all as specified.

S&F in repairs brass chromium plated tubular towel rail, 20 mm dia `D' type, 60 cm long between flanges.

S&F in repairs soap dish brass CP of standard pattern and fixed to wall with CP brass screws.

M&L for 12mm thick interlocking laminated wooden flooring of approved colour mounted on 2mm thick resin saturated paper and fixed on levelled floor using adhesive as per manufacturers instructions including proper levelling the base surface with filling holes and patches with cement mortar (1:3) . Make- Armstrong, Responsive or equivalent as approved

M&L for 12mm thick interlocking laminated woodenskirting 100mm height of approved colour mounted on 2mm thick resin saturated paper and fixed on levelled wall using adhesive as per manufacturers instructions including proper levelling the base surface with filling holes and patches with cement mortar (1:3) . Make- Armstrong, Responsive or equivalent as approved

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick or concrete surfaces and finished even & smooth without using extra cement completed all as specified.

M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

M&L for machine cut, mirror polished granite slab ( One piece) 18 to 20 mm thick as in kitchen platform of any size , set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including necessary grinding and rounding, moulding to edges of slab laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) and making hole for inserting gas pipe including dismantling existing platform complete all as specified.

S&F in repairs stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen with plug, washers, waste pipe, CI Cantilever brackets, connecting union to pipe, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm.

Unitech Enterprises

M/s Qureshi Construction Co

satguruenterprises

RUPESH CONSTRUCTION CO

H R Enterprises

jkconstruction

SN CONSTRUCTION

SAHU AND SAHU CO.

SAHI SAGAR ENTERPRISES

Vandan Enterprises

SAI SIDDHI CONSTRUCTION

Joy builders

SHREE JAGDISH FURNITURE CO.