Interior and Fit-out works of EDCIL office, J-301, 3rd floor, Tower-J at World Trade Centre, Nauroji Nagar, New Delhi - 110029

S NO DESCRIPTION AMOUNT AMOUNT TOTAL AMOUNT

S NO DESCRIPTION AMOUNT AMOUNT TOTAL AMOUNT

DSR NON DSR DSR+NDSR

Multiplication factor for Modified Analysis of Rates

@0.973 on DSR Items

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - CIVIL WORKS

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

1 FLOORING WORKS

CEMENT CONCRETE: Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and

1.01 shuttering-all work upto plinth level.

4.1.8 1: 4: 8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) 65 CUM 6812.00 442780.00

RAISED FALSE FLOOR: Providing and fixing removable raised/false access flooring with systemand its components of approved

make for different plenum height with possible height adjustment upto 50mm, comprising of modular loadbearing floor panels

supported on G.I. rectangular stinger frame workand G.I. Pedestal etc. all complete, as per the architectural drawings, as specified

and as directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25

mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I.

pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts

screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level.

The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes at

both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all

directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate

11.54 solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom

1.02 of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of

800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of

64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together

(minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust

protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed

with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non

Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a

Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four

steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all

complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be

printed on the side of the panel to ensure the quality of the product.

11.54.2 450mm Finished Floor Height (FFH). 13 sq m 5977.35 77705.55

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish.

Thickness 1.30 to 1.50mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

ENGINEERED WOODEN FLOORING: Supplying and Installation of engineered wooden flooring of total thickness 13 mm -16 mm,

1.04 MR Toplayer PEFC controlled Core board PEFC controlled Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue and 150 sq m 6168.00 925200.00

groove Length Uniclic Width Uniclic Multifit Domestic use Conditions as per direction of engineer in charge.

VITRIFIED TILES: Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm

1.05 thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints

with white cement and matching pigments etc., complete.

MR Size of Tile 1200x600 mm 500 sq m 2330.00 1165000.00

b MR Special Subway Tile 10 sq m 3563.00 35630.00

CARPET TILES: Providing and laying carpet tile flooring. Carpets shall be of Type 6 nylon loop pile carpet tiles/Plank. The carpet

shall have sufficient gauge (1/10 ~ 1/12) with sufficient stitches (10~13) per inch. The carpet shall be solution dyed fibre content or

with injection printing technology. The carpet shall have the pile height ranging from (2.0 ~ 3.0) mm with average density higher

than 4500 Oz/ cubic yard. The total thickness of the carpet tile shall also range from (5.5 ~ 6.0) mm.

IPS FLOORING: 52mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener

1.07 11.4 consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound 330 sq m 978.45 322888.50

mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the

cost of nosing of steps etc. complete.

2 Digitally signed by RAJ PAL

TOTAL FLOORING WORKS 843374.05 2909770

2 FALSE CEILING WORKS

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS

: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to

centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed

to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed

with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5

2.01 12.45 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall

be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long

G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,

the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230

mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x

25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both

12.45.1 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 350 sq m 1355.80 474530.00

LOUVERED WOODEN FALSE CEILING & WALL PANELS: Providing and fixing CUSTOM Channeled woodwork ceiling panel600

DENSITY / fire Test certificate as per BS_476 part 7) acoustic wall panel of width of 192mm with finishing of 15 mm thick Grooved

wooden acoustic panel of size 2400 mm, Groove Size 3mm at an RANDOM interval of 13MM,21mm,42MM, and28 mm , the

wooden acoustic panels to be backed with black acoustic fleece with NRC of 0.6 the edge of panel shall be Tongue and groove to

be fixed with clips on The grid should be of “BOLLARD” make with 24mm wide T - section flanges color white. The main T runner

with length and size of 24X38mm made from .30mm thick sheet spaced at 1200mm Centre to Centre and cross T of size

24X38mm made of .3mm thick of 1200mm long spaced between main T at 600mm center to centre to form a grid of

1200X600mm and second cross T of length 600mm and size 15X38mm made of 0.30mm sheet to be interlocked at middle of the

1200X600 mm panel to form grid of 600X600mm and wall angle of size 19X19

The grid frame should be suspended from ceiling using M-6 fastener, L Cleat, threaded rod of galvanized steel 6mm dia along

with L shape Grid holder which will be fixes to Main Runner at spaced of 1200 c/c.

Formaldehyde: E1-M1

GYSPUM DESIGN PANEL : Providing and fixing suspended false ceiling- Danoline - : Designpanel Size 900X2400X12.5mm

perforation tangent 4mmx14mm,10/20 mm C/C with 15.8 % perforation and NRC upto 0.70: Micro perforation of glass-fibre

reinforced gypsum material, which includes providing and fixing GI perimeter channels The furring should be min. 60 mm wide at

the short end joints (if wood is used; the steel furring can be min. 45 mm). The remaining furring can be 45 mm wide. of size 0.55

mm. Thk. having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, screw

fixed to brick wall/ partition with help of nylon sleeves and screws, at 610 mm centers. The suspended GI intermediate channels of

size 45 mm,0.9mm thk with two flanges of 15 mm each from the soffit at 900 mm centers with ceiling angle of width 25mm x

2.03 MR 10mm x 0.55mm thk fixed to soffit with GI cleat and steel expansion fasteners. Ceiling section of 0.55 mm thk having web of 10 sq m 2830.00 28300.00

51.5mm & two flanges of 26mm each with lips of 10.5mm are fixed to the intermediate channels with help of connecting clips and

in direction perpendicular to the intermediate channel with centers of 333 mm perforated gypboard is then screw fixed to ceiling

section with 25 mm dry wall screws at 300 mm centers to G.I. framing in perfect level. Screw fixing is done mechanically either

with screw driver or drilling machine with suitable attachment. Finally the boards are to be joined and finished so as to have a flush

look with jointing compound.

Cleaneo Technology - Air purification & Air quality.Active reduction of air polluants thanks to Cleaneo Technology effectively

reduces concentrations of VOC’s like alcohol, aldehydes, ketons and esters as well as unpleasant odours from e.g. food or

WAVE BAFFLE CEILING: To Supply & Install Custom made Vertical curve Polylam Blades Ceilings as per the design intent. The

vertically curve baffle system POLYLAM exhibiting space- delineating characteristics. The system comprises vertically curve baffle

with 75-150mm deep curved rafters manufactured out of 1.2mm Aluminium to provide wave effect. The module for fixing baffle

shall be 150mm centres as per design requirement. The carrier rails run perpendicular to the baffles axis and can be mounted with

2.04 MR M6 threaded rods using technical approved fasteners as per EN 13964 standards. The individual baffle lengths between 1200- 45 sq m 8909.00 400905.00

2400 mm can be selected. Baffles lengths less than 1500mm required two carrier rails mounted at the baffle ends. Baffle longer

than 1500mm require additional carrier rails mounted in the centre. Finish RAL Powder Coated.No Pre Coated products shall be

accepted. The spacing of the grid angles is according to the requirements of DIN 18168 and DIN EN 13964 and quality controlled

to ISO 9001:2015 approved by SIS & LEED certification by Indian Green Building council (IGBC).

3 Digitally signed by RAJ PAL

GYPSUM ACOUSTIC PERFORATED GRID CEILING 300X1200 : Providing and fixing suspended Demountable acoustic ceiling in

visible, but flush grid system -Knauf Danoline : Belgravia ( with technical panel ) 300 x 1200 x12.5mm flush grid system with high

grade, glass fibre reinforced, acoustic, white painted, gypsum tile with acoustic perforation as Unity Round 4mm c/c 10mm .

Material: Perforated plasterboard

Board type: Ceiling tile

Length x width x thickness: 300X1200X12.5mm

Edge: E, recessed grid system ( 8mm recess)

Perforation: Unity 4mm round

Perforation percent: 11.0%

Surface: Water-based acrylic paint

Colour: White NCS 0701 Y24R, RAL 9003; gloss 5

Attachment: 15mm T-grid system

Edge section: 20x24 mm angled profile, 15+15 x 8+25 mm cornice moulding

GYPSUM LOUVERED CEILING: 12.5x600x600 high grade, glass-fibre reinforced, acoustic, gypsum panel with acoustic

perforation as Unity 3 - square 3.5x3.5mm c/c 8.33 type U3. The ROLD 12 tiles with Strip shall be screw fixed on minimum 60mm

wood or steel furring. The ROLD 12 with strips tiles are with edge B+ and are pre-painted ready for installation on site. ROLD 12

screws, type Torx 15, with white-painted head are used for screw-fixing. The acoustic ROLD 12 tiles are furnished with a grey

(white) absorbent felt backing with an airflow resistance of 330-460 Ns/m³ (DIN 53887).Colour - White, NCS 0701 Y24R, gloss 5

(standard) or re-paintable at site with water based acrylic paint.Closest match for repainting: NCS 0700/RAL 9003. Paint Type -

Waterbased acrylic emulsion paint including titanium for hygienic indoor climate. Light Reflection: 69.2% according to DIN Norm

5036.Acoustic Property - αw: 0.95; NRC: 0.90.Fire Class - A2-s1,d0 .Suspension - The ROLD 12 must be screw fixed to furring of

22 mm wood or 60mm steel battens at 300 mm c/c.

METAL BAFFLE CEILING : Providing & fixing POLYLAM® is vertical & horizontal baffle system, exhibiting space-delineating

characteristics.

The system comprises baffles 50mm wide & 150 Deep thickness of minimum 0.5mm GMS, installed at 150mm C/C . The C

shaped shaped carrier rails run perpendicular to the main baffles profiles. Individual baffle lengths between 300 and 2400 mm can

be selected. Baffle are supplied with the end cap matching the similar finish of baffle. Tolerances according to TAIM, DIN EN

13964 and quality controlled to ISO 9001:2015 approved by SIS. Substructure for POLYLAM® Vertical baffle system consisting

of C shape carrier of minimum 1.2mm thick installed perpendicularly to baffles, same was hanged to wall with the help of wall

anchor fasteners. Baffles to be connected perpendicular to C shaped carriers with the help of baffle hanger brackets. The primary

profiles must be connected to one another with longitudinal splice connectors. C shaped baffle carriers to be installed at maximum

distance of 1200mm. in a length of 2400 mm baffles.Manufacturer shall have the fully automatic powder coating system with

power and free conveyorize 3mtr/minute capacity. Powder coating plant shall be equipped with latest modern technology with fully

automatic inline Pre-treatment using nano technology, Inline automatic water Drying system after pre-treatment. Mode of

Measurements: Measurements shall be wall to wall without any deductions for lights, diffuses, columns etc.

GYPSUM TILE FOR WET AREAS ( TOILETS & PANTRY ) : Providing & fixing of DANOTILE , high humidity resistant, made of

special high grade, glass fibre reinforced gypsum, 600x600x9.5mm thick, 30 min fire rated* (third party certificate ), A2,s1-d0,

mounted on T-24 exposed Grid suspended ceiling system which includes Main Tee at every 600mm c/c and Cross Tee, 600mm.

Wall angle is then fixed along the perimeter of wall with screws (as per manufacturers specification). The suspension is done with

all accessories like Soffit cleat, leveling clips & wire rods as per design, drawings and architects instruction.The tiles are machine

laminated with non-toxic PVC free foil on the face side & red poleyethelene foil backing on the reverse side. Charachteristics :

2.08 MR The Tiles shall be: 16 sq m 1919.00 30704.00

• Manufactured from high grade non-combustible glass fibre reinforced gypsum board produced according to EN 520.

• Tested to meet the safety requirements of EN 14190.

• Tested in accordance with EN 13501-1 to achieve minimum fire classification A2-s1,d0.

• Resistant to 90% RH and short term exposure for higher humidity.

• Non hazardous and fully recyclable.

The entire work shall be done as per design, drawings and direction of engineer in charge.

4 Digitally signed by RAJ PAL

PERFORATED GYPSUM CORRIDOR CEILING : Supply and installation of Danoline acoustic self supporting ceilings – Corridor

400 - 9.5 x 400 x 1800 mm high grade, glass fibre reinforced, acoustic, white painted, gypsum panel with acoustic perforation,as

Micro - round 6x6mm c/c 15mm type NRC - .70 ,Corridor 400 panels are with integrated metal profile on the back, to be installed

in free span without suspension hangers.

The tiles are furnished with a grey/white absorbent felt backing with an airflow resistance of 330-460 Ns/m³ (DIN 53887). RH - 90%

LR - 82.6% Fire Class A2-s1,d0 SUSPENSION - The flex-profile is an integrated part of the Corridor ceiling plank. The

suspension system from approved manufacturers consists of reinforced wall angles and 38mm main runners are used between

sections and lines of Corridor planks.

Cleaneo Technology - Air purification & Air quality.Active reduction of air polluants thanks to Cleaneo Technology effectively

reduces concentrations of VOC’s like alcohol, aldehydes, ketons and esters as well as unpleasant odours from e.g. food or

cigarette smoke. Air purification properties tested according to CEN standards and VDI guidelines by Fraunhof Insistute for

Building Physics

PERFORATED GYPSUM BOARD CEILING : Providing and fixing suspended false ceiling- Danoline - : solopanel Size

1188X1998X12.5mm Globe perforation 8/18 with 8.7% perforation with NRC upto 0.6 : Regular round perforation of glass fibre

reinforced gypsum material, which includes providing and fixing GI perimeter channels of size 0.55 mm. Thk. having one flange of

20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, screw fixed to brick wall/ partition with

help of nylon sleeves and screws, at 610 mm centers. The suspended GI intermediate channels of size 45 mm,0.9mm thk with

two flanges of 15 mm each from the soffit at 900 mm centers with ceiling angle of width 25mm x 10mm x 0.55mm thk fixed to soffit

2.1 MR with GI cleat and steel expansion fasteners. Ceiling section of 0.55 mm thk having web of 51.5mm & two flanges of 26mm each 51.75 sq m 3084.00 159597.00

with lips of 10.5mm are fixed to the intermediate channels with help of connecting clips and in direction perpendicular to the

intermediate channel with centers of 333 mm perforated gypboard is then screw fixed to ceiling section with 25 mm dry wall

screws at 300 mm centers to G.I. framing in perfect level. Screw fixing is done mechanically either with screw driver or drilling

machine with suitable attachment. Finally the boards are to be joined and finished so as to have a flush look with uniflot.

Cleaneo Technology - Air purification & Air quality.Active reduction of air polluants thanks to Cleaneo Technology effectively

reduces concentrations of VOC’s like alcohol, aldehydes, ketons and esters as well as unpleasant odours from e.g. food or

PERFORATED SQUARE ACOUSTIC CEILING: Providing and fixing suspended Demountable acoustic ceiling in recessed grid

system 300x1200x12.5mm E with Unity 3, square 3.5mm holes, with 0.80 NRC* Material: High Grade Glassfiber Reinforced

2.11 MR Perforated plasterboard with Cleaneo TechnologyBoard type: Ceiling tile Lengthxwidthxthickness: 300x1200x12.5mmEdge: E 45 sq m 3500.00 157500.00

recessed grid system (8mm recess) Perforation: Unity 3, 3.5x3.5 Surface: Water-based acrylic paint Colour: White NCS 0701

Y24R, closet match to RAL 9003; gloss 5 Attachment: Silhouette 15mm face exposed grid. 100 MM Centre to Centre

LOOP CEILING: Providing & fixing LOOP® Type 2 system formed as an open metal ceiling with an open area of more than 50%

and to the flare [5mm] of the perforation pattern [RV-50-40] the ceiling has a three-dimensional visual effect and hides the insight

into the plenum. Bypassing the perforation, the S-shaped sides of the LOOP® interlock both the long and front side joint with a non

magnetic suspension, the elements are installed with a circumferential 1 mm joint, thus compensating tolerances in x and y

direction. The non-magnetic suspension system effectuates a self-alignment of the elements [puzzle effect]. The module size

966x1115x1.0mm GMS is perforated with 60mm deep drawn holes .The substructure consists of a form perforated L profile

[U1040] as a lateral grid which is suspended from the ceiling with nonius adjustable upper and lower parts or with threaded rods

using official approved dowel plugs. The grid profiles are to be connected together at the ends by means of longitudinal connectors

[U 1041] [screw fasteners]. The spacing of the grid profile is according to the requirements of DIN EN 13964. On profiles angles, C-

band raster as secondary profiles are bolted on by means of C channel hanger bracket with M6 bolts. Only construction parts

approved by the manufacturer may be used. Provide necessary supports, provisions as per the architects / PM’s Instructions.

Tolerances according to TAIM, DIN EN 13964 and quality controlled to ISO 9001:2015 approved by SIS.Finish of ceiling is in RAL

9016 white/ RAL 9006 Silver grey powder coated with minimum 70-80 microns paint thickness. Manufacturer shall have the fully

LINEAR OPEN CELL CEILING: Providing and fixing of Starlum 9 linear cell ceiling made out of Aluminium. The assembled cell

ceiling panels shall be in size of 600x1200mm. The assembled cell ceiling panels shall made out of main blades in 9mm (W) x

40mm (H) in 1200mm (L), installed at 66.66 mm c.c. and cross connected to secondary blades in 15mm(W) x 37mm (H) in

600mm (L) with 240 mm pitch. The assembled cell ceiling panels are then clipped into U-94 carriers in GMS,coated in black

enamelled finished at 1200mm c.c. Wire clips shall hold the cell ceiling panels into the U-94 carriers. Once the U-94 carriers are

installed then primary angles made out of GMS, type U1040 are cross connected to the U-94 carriers at 1200mm c.c. for lateral

2.13 MR bracing The whole ceiling shall be suspended by M6 threaded rods installed at 1200mm c.c. The panels are fully downward 89 sq m 5200.00 462800.00

demountable / hinged from the proprietary U 94 carrier section using C 94 spring panels.The system should be in accordance with

Material class A2-s1, d0 according to EN 13501-01 “non-combustible”, as per the Direction of Arch-in-charge. The system will

meet fire retardant standards of BS 476: Part 6 & Part 7. Tolerances according to TAIM, DIN EN 13964 and quality controlled to

ISO 9001:2015 approved by SIS, LEED certification by IGBC.All panel modules must be hinge able through wire clips. Finish of

cell ceiling panels: Metallic silver in RAL 9006 & RAL 9016 White White colour.

TOTAL FALSE CEILING WORKS 474530.00 3524031.00

3 WALL FINISHES WORKS

5 Digitally signed by RAJ PAL

GLASS PARTITION (FIXED DOUBLE GLAZED GLASS PARTITION): Supply & Installation of Aluminum profile with top & bottom

profiles of size 82mm x 38mm in Natural Anodized / Black finish. Partition sides to be fixed with mullion and it's covers should be

easily accesible while removal of glass, if & when required. Glass to be fixed with suitable EPDM gaskets for insertion of

combination of 10mm thick clear toughened glass + 58 to 62 mm Air Gap + 12 mm thick clear Toughened Glass. Glass should not

placed directly on profiles for giving more strength. It should be placed on aluminium spacer profiles and spacers should be

3.01 MR covered with cover profiles. Partition Glass joineries consists of two-way Polycarbonate I-profiles, 90 Degree Polycarbonate L- 80 sq m 13706.00 1096480.00

Junction and Polycarbonate T-Junction profiles. Polycarbonate profile joineries to be fixed with double sided adhesive tape &

profiles to be inserted in the joint instead of sealing it with sealants. Polycarbonate profiles to be used to give continuity glass

effect. Hardware for fixing profiles to be used as per manufacturer standard. Profile & hardware should be from same brand to give

end to end solution. Costs should be inclusive of necessary Hardware for fixing of profiles & installation charges.

FRAMED HINGED GLASS DOOR: Supply & Installation of aluminium Door frame of 82X55mm and double glazed stile door frame

of size 82x40 mm with necessary seals in natural anodized / black finish with specially designed Aluminium Hinges (5 Nos.) ) &

Lever Handle in Oval shape SS304 with SS 35mm Backset of 22mm Square Forend with Strike plate. Door should have Lock,

3.02 MR oval escutcheons, strike plate, EPC One Side Key other side knob-70mm and Geze Concealed Door closer with 12x20mm Sleek 20 Nos. 89087.00 1781740.00

Track Channel with 320mm Small Arm length. Door should have glass combination of 8mm toughened glass+Airgap + 8mm

toughened glass and necessary seals to be provided all around the door frames along with drop down seal. Cost should be

inclusive of installation charges for Doors.

WOODEN DOOR FRAMES: Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall

be paid for separately).

9.1.1 Second class teak wood 0.174 cu m 142949.70 24873.25

WOODEN BATTENS: Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and

3.04 drilling necessary holes for rawl plug etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood 2 CUM 187277.65 374555.30

FLUSH DOOR SHUTTERS: Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative

9.21 type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with

3.05 vertical grains or cross bands and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws 9.6 SQM 2392.65 22969.44

WOODEN LIPPING: Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door

shutters (over all area of door shutter to be measured).

Providing and Fixing -900 mm or equivalent D-type Handle Material : Stainless Steel. Finish : Satin Stainless Steel (SSS). of

approved make and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing Mortise Lock Body SB/TB for door thickness 25-50 mm for of approved make and model all complete as per

the direction of Engineer-in-charge.

Providing and Fixing Double cylender Floor Spring- with Closing Force EN 3 with Maximum door weight 105 Kg. Maximum door

width 950mm.Closing speed : 130°

Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with

5 Years Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of Engineer-in-

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and

3.11 9.53 embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm 7 EACH 228.85 1601.95

Providing and Fixing top and bottom strap of approved make and model all complete as per the direction of Engineer-in-charge.

WOODEN DOOR LOCK: Providing and Fixing Dead lock Back set- 50 mm with Key Hole of approved make and model all

complete as per the direction of Engineer-in-charge.

6 Digitally signed by RAJ PAL

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce

Sand-blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive

having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4

pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) .

LACQUERED GLASS: Providing and fixing of 6mm thick annealed SGG Planilaque Evolution (premium GRIHA rated lacquered

glass from Saint-Gobain) of approved color by Architect/ Client / Customer, fixed with SGG ULTRAFIX (compatible neutral core

silicon/ double sided tape) on a perfectly leveled 12mm thick water proof marine plywood / MDF / Mineral fibre board which is

mounted on the RCC wall/any other structure. Lacquered glass must be made industrially (via curtain coating process); opaque (if

viewed against a support wall), coated with PU lacquer (50 micron thick); color consistency (measured by Minolta

spectrophotometer CM5081); highly durable (passes PERSOZ hardness test for minimum 220 oscillatios); humid resistant

(conforms to BS EN 1036 1999); environmentally friendly (no lead, no arsenic, no copper, noformaldehyde); appropriate recycled

content (12% post industrial/ 6% post consumer); compressive strenght (1000 MPa) & tensile strength (40 MPa), same as float

GYPSUM BOARD PARTITION: Providing and fixing partition upto ceiling height consisting of G.I. frame and required board,

including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120

gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm

thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm

length or suitable anchor fastener or metal screws with nylon plugs and the studs 48mm wide having one flange of 34 mm and

other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610

9.105 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with

3.16 suitable anchor fastener or metal screws with nylon plugs at spacing of 450mm centre to centre, and fixing of boards to both side

of frame work by 25mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300mm centre to centre. The

boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99mm width (0.9mm

thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to

metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle

beads at corners (25mmx25mmx0.5mm), joint finisher and two coats of primer suitable for board as per manufacturer's

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board

conforming to IS: 2095: part 3 (Board with BIS certification marks)

ACRYLIC SOLID SURFACE CLADDING: Supply & Installation of 12 mm thick Thermoformable Acrylic Solid Surface Sheets

(DuPont Corian/ Tristone/ Lotte), over a robust substrate made out of BWP/ Flexi Ply/ MS- Aluminum sections etc. as required, to

achieve stated design intent. ASS in 12mm thickness, shall be manufactured as per guidelines of ISO 19712. ASS sheets to be

cut, pasted and finished over the substrate as provided, to achieve smooth and seamless finish. Item cost include intend

adaptation, supply, freight and installation of ASS sheets to site, wastage, finishing, creating provisions/ cut-outs for accessories

and final placement of table. Work shall be done by company's authorized Quality Network (QN) fabricator, as per satisfaction of

WINDOW BLINDS : Providing & supplying of fabric venetian Window Blinds as per the approved sample, consisting of 3" vane

size having head rail, rotator rail and bottom rail made of aluminium alloy 6063-T6 PER ASTM B221 - 85 extruded profile, powder

coated and provided in standard natural white color. The rolling tube should be made up of aluminium alloy from extruded profile

of 34mm dia. The head rail dimensions should be of suitable size according to the length of head rail and space available and

finished with fabric cover matching with the louver fabric. The cassette should conceal the working mechanism rotary-clutch.

3.18 MR (White polycarbonate spring tempered rotary clutch which raises), lower and tilts the blinds. White polycarbonate limit assemblies 117 SQM 12952.00 1515384.00

control vane over-rotation, located on either side of individual blinds. The room darkening fabric of Blind should be of anti-static

polyester vanes which have facings between two sheer layers (50 mm wide) to reduce glare. Sheer layers should be of white

100% knit polyester, the colors, textures and opacities as approved. The fabric shall be made of spun- bonded 100% polyester

fiber (having green guard certification) treated with soil & dust repellent requiring minimum regular interval cleaning. GREEN

GUARD Gold certified for low-emitting products to maintain Indoor environment. Up to 80% ultraviolet protection with vanes open

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with external glazing as per

details of Architect. Rate to include finishing exposed surfaces of the Pelmet with 1mm laminate.

AAC WALL (150 MM): Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/ 300mm thick AAC

blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying

polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and

reinforcement shall be made for seperately).

3.21 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 34.65 Sqm 104.80 3631.32

13.4 12 mm cement plaster of mix :

7 Digitally signed by RAJ PAL

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS

13.48A 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon

3.24 additives

New work (Two or more coats applied @ 1.43 litre/10 sqm) over and including priming coat of exterior primer applied @ 0.90

PLY : Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved primer on one face,

fixed on wooden/ steel frame work, complete as per direction of Engineer-in-charge. (Framework shall be paid for separately)

12mm thick commercial ply conforming to IS: 1328 BWR type 288 SQM 1224.65 352699.20

5.5mm THICK FSP HDHMR BOARD: Providing and fixing in wall lining, partitions etc. Confirming to ASTM E-84-2021 class1 one

side 1mm decorative Lamination, having even grade low emission, high moisture resistance, fire resistance, borer, termite &

3.26 MR fungus resistance, green material and environmental friendly with necessary fixing arrangement and screws etc. , complete as per

direction of Engineer-in-Charge

5.5mm thick FSP HDHMR Board 200 SQM 648.00 129600.00

ALUMINIUM FRAME: Providing and fixing partition, frame work in 50x25x1.5mm Aluminium Section placed at 600mm centre to

3.27 MR centre both ways (horizontal & vertical) fastened to floor, ceiling and horizontal member. The item includes providing and fixing 288 SQM 1347.00 387936.00

50mm thick polyester synthetic insulation as insulation of 100 GSM.

FIBRE WALL COVERING : Supply & Installation of Glass fiber based homogenous Woven/ non-woven .1mm thick, 100-200 GSM

Density brethable Wall Coverings. Material to be fire certified with minimum Euroclass BS1D0 certification under EN13501, no

harmful chemical coated with Oekotex Standard 100 certification and non-toxic in nature for closed enviornments with A+ attested

for emission in indoor air. Installation to be done over smooth, dry and dust-free substrate as specified with OEM recommended

adhesive by the supplier's authorized installer team. Installation measurement as per the entire area (concealed/visible) installed.

Finished as per satisfaction of E.I.C. PAINTABLE

3D ACOUSTIC PET WALL PANELLING :Providing and fixing Smart Acoustical Wall Panels with square edges made of Polyester

fiber substrate 12mm thick with acoustical properties and with an option of 12 colours as per the choice of the Architect/ Person in-

charge, providing a minimum sound absorption level of 0.50-0.90 NRC, to be affixed to wall using Adhesive. The material should

3.29 MR adhere to Formaldehyde emission standards of GB18580-2001 class E1, asbestos-free, non-toxic, non-irritant and recyclable. 116.25 SQM 3426.00 398272.50

Material to have fire resistance as per B1 Chinese standards. The sheets to have density of 200 kg/m3 and weight of 2.0 kg/m2.

The sheets to be made available as per the V groove design approved by Architect/ Person in charge(attached Pic). Cutting to be

in done by supplier using blade cutting as per requirement.

WOODEN LOUVERED PANELLING : Providing and Fixing of ACOUSTIC WALL PANELS. The MDF wall panels shall be

composed of Medium Density Fiber board (MDF) with a minimum density exceeding 710 kgs/m³, and they shall be covered with

PP foil of Renolit, Germany brand/make with a thickness of 120 microns. The adhesive used for affixing the panels must be PUR

(polyurethane) hotmelt glue, and the design of the panels will be as per the specifications provided by the architect. The

dimensions of the panels are 17-18mm in thickness, 130.5mm in width, and 2745mm in length.The scope of work includes

providing and fixing these MDF wall panels onto a framework constructed either from MDF or plywood. The framework should

have a thickness of 50 mm and a width ranging from 8mm to 12mm. The installation of the panels can be executed through either

the nail-down method or the pasting method, with the use of a high bonding adhesive suitable for MDF and plywood, NRC 0.65

upto 1 NRC . The finishing of the MDF wall panels should adhere to the approved architectural drawings and the directions

provided by the Engineer-in-Charge (EIC).

LAMINATE PANELLING : Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede

3.31 DSR/MR finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, 200 SQM 1224.65 244930.00

including cost of adhesive of approved quality.

9.127.2 1.0 mm thick

TOTAL WALL FINISHING WORKS 2023376.62 6810776.80

4 MISCELLANEOUS WORKS

8 Digitally signed by RAJ PAL

MODULAR KITCHEN - UNDER COUNTER STORAGE CABINETS:

Modular kitchen - Under counter storage cabinets:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and

sufficient number of drawers made of 18 mm thk.HDHMR board with lamination in frosty white laminate with 0.8 mm laminate

complete with 0.8 mm edge banding.All shelves should be supported on approved quality SS pins and shall be adjustable for

different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with

18mm wide 2mm thick PVC edge banding, All Shutters/ drawers finished in high gloss acrylic of approved make-

Rehau,Ornare,Senosan and having handless profiles.The cabinet boxes of floor units will be supported by 100mm height vertical

adjustable legs (Hettich make) which will be covered with PVC skirting (Rehau or equivalent make ) in brushed aluminum finish

attached by hardware of skirting. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw

plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment.

Cabinet boxes size would be varies from 400X580X710MM to 1000X580X710MM (approx.) and join together as per site

requirements etc. Handle Profile,Aluminum Handle Profile for lift ups,O* Hinges,Corner Hinges,PVC

legs,Skirting,Connector,Screw,Wall Mount set. Complete all as per the direction of Engineer in Charge.

MODULAR KITCHEN - OVERHEAD STORAGE WALL UNITS:

Modular Kitchen - Overhead storage wall units:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and

sufficient number of drawers made of 18 mm thk. HDHMR board with lamination in frosty white laminate with 0.8 mm laminate

complete with 0.8 mm edge banding.All shelves should be supported on approved quality SS pins and shall be adjustable for

different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with

18mm wide 2mm thick PVC edge banding, All Shutters/ drawers finished in high gloss acrylic of approved make-

Rehau,Ornare,Senosan and having handless profiles. The unit shall be fixed to the floor/ wall/slab using metal screws of

appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for

measurement and payment. Cabinet boxes size would be varies from 400X320X710MM to 1000X320X710MM (approx.) and join

together as per site requirements etc. Handle Profile,Aluminum Handle Profile for lift ups,O* Hinges,Corner Hinges,PVC

legs,Skirting,Connector,Screw,Wall Mount set. Complete all as per the direction of Engineer in Charge.

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels .Make.Hettich,Samsung,Irex,Hafale 5 Each 7943.00 39715.00

4.02B MR Providing and fixing of Bottle pulout 200mm. Make Hettich, Samsung,Irex,Hafale 2 Each 11531.00 23062.00

SHOP DRAWINGS: Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions

4.05 MR etc. and for prepration of as built drawing any other details as and when desired by Engineer Incharge/ client. A qualified 1 LS 800000.00 800000.00

professsional for the purpose shall be appointed after due appproval from Engineer InCharge.

TOTAL MISCELLANEOUS WORKS 0 1089154.90

9 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2023 DSR (INR) NON-DSR (INR)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28.2 Flexible pipe

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality

2 conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 6 574.30 3445.80

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse

3 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing

in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 2 416.80 833.60

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching

surface after housing G.I. pipe etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with

18.7 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 6 20mm nominal outer dia pipes METRE 20 335.00 6700.00

18.7.3 25mm nominal outer dia pipes METRE 10 401.55 4015.50

18.7.4 32mm nominal outer dia pipes METRE 5 518.75 2593.75

18.7.5 40mm nominal outer dia pipes METRE 5 702.95 3514.75

18.7.6 50mm nominal outer dia pipes METRE 5 934.15 4670.75

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing.

18.8 This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete as per direction of

Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes METRE 10 497.80 4978.00

18.8.2 20mm nominal outer dia pipes METRE 20 537.60 10752.00

18.8.3 25mm nominal outer dia pipes METRE 5 627.25 3136.25

18.8.4 32mm nominal outer dia pipes METRE 5 739.30 3696.50

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards

8 and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 2 798.95 1597.90

Digitally signed by RAJ PAL

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil,

waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary

specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),

reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings,

clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed /

inside duct / under floor & basement ceiling / external work etc. including chase cutting as

required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or

embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1

9 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of

MR shuttering for proper completion of the work, breaking and making good the walls and floors etc.

after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5

mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-

charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 40 536.00 21440.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 5 416.00 2080.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/

Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger,

socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp &

hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete

1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete

MR 11 in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 2 536.00 1072.00

MR 12 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 2 726.00 1452.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover

with screws and other required fitting complete as required.

Supply, Installation, testing and commisioning of toilet waste water super quiet portable pumping

station. Pump upto vertical 5 meters and horizontal 100 meter from toilet to vertical shaft with inlet

connection in portable pump side inlet of 50, 75, 110 as per requirement to complete the work as

per the directions of engineer in charge

Providing and fixing stainless steel tray below sewage pipe of size 200x200x200 mm of grade

SS304 including all accessories

MR 16 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 1 12004.00 12004.00

MR 17 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER EACH 2 4392.00 8784.00

MR 18 Supply, Installation, Testing and Commisiong of TOWEL HOLDER EACH 2 3336.00 6672.00

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and

19 making good the walls wherever required :

17.10.1 Kitchen Sink with Drain Board

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Description Image Unit QTY Rate DSR AMOUNT NON DSR AMOUNT

Supply, Installation, Testing and Commissioing of Recessed downlightwith HPE (High-

Performance Efficiency) with LED (Light Emitting Diode), system power: 12 W, Luminous

flux of luminaire 1320 lm, 110 LM/W system efficacy, Colour temperature of 4000 K, Neutral

white, CRI > 80, 230V constant current driver, 70% of luminous flux after 50,000 operating

1 MR hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium, Polyester Nos 115 1394.00 160310.00

powder white coloured coat applied over a 5-stage pre-treatment trim, prismatic diffuser for

homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic

control gear, Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Pendent luminaire with HPE (High Performance Efficiency) LED (Light Emitting Diode),

system power: 28W, Luminous flux of luminaire 3080 lm, 110 LM/W system efficacy, colour

temperature of 4000 K, neutral white, CRI > 90, THD<5%, SDCM 3, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours, Energy efficient LEDs, Direct light

2 MR emission, Luminaire profile in aluminium, Polyester powder aluminium white coloured coat Nos 110 4001.00 440110.00

applied over a 5- stage pre-treatment, prismatic diffuser for a homogenous light distribution

ZHLS(ZERO HALOGEN LOW SMOKE) internal wiring, integral electronic control gear,

Protection class I, IP 40, L = 1175 mm, B = 52 mm, H = 70 mm,

Supply, Installation, Testing and Commisioning of Recessed luminaire with LED (Light

Emitting Diode), system power: 28 W, luminous flux of 2800 lm, colour temperature of 4000

K, Neutral white, 230 V constant current driver, 70% of luminous flux after 50,000 operating

hours, energy-efficient LEDs, CRI > 80, CRI > 80, THD<5%, P.F>0.95, SDCM 3, direct

light emission, Luminaire housing in Aluminium Extrution, polyester white powder coat

applied over a 5-stage pre-treatment, Opal diffuser for glare-free uniform light, integral

electronic control gear, Protection class I, IP40, L = 595 mm, B = 595 mm, H = 70 mm

Recessed with trim luminaire Pinspot light with LED(Light Emitting Diode) system power:

5W, luminous flux of luminaire 400lm, colour temperature of 4000K, Neutral white, CRI>90,

230V constant current driver, 70% of luminous flux after 50,000 operating hours, direct light

4 MR emission, aluminium housing with trim, polyester White powder coat applied over a 5 stage Nos 130 1200.00 156000.00

pre-treatment on trim, with lens and a beam angle of 24° and external electronic control

gear, Protection class II, IP20

Recessed with trim luminaire Pinspot light with LED(Light Emitting Diode) system power:

8W, luminous flux of luminaire 640lm, colour temperature of 4000K, Neutral white, CRI>90,

230V constant current driver, 70% of luminous flux after 50,000 operating hours, direct light

5 MR emission, aluminium housing with trim, polyester White powder coat applied over a 5 stage Nos 55 2400.00 132000.00

pre-treatment on trim, with lens and a beam angle of 24° and external electronic control

gear, Protection class II, IP20,

Supply, Installation, Testing and Commisioning of Round Ring shaped Suspended mounted

LED Ceiling luminaire with Downlight distribution with Ring shaped Diffuser having system

power: 70W, Luminous flux of luminaire 7000lm, direct light emission, CRI > 80, 230V

constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient

LEDs with Dia. (Ø) 1200mm with Opal PC/PMMA diffuser for homogenous uniform, soft and

6 MR glare free light distribution, luminaire housing profile in extruded aluminium with efficacy of Nos 4.00 28782.00 115128.00

100Lm/W, Power Factor of more than 0.90 & CCT - 4000K/5700K, Powder coated

White/Black coloured, Internal wiring along with Integral Electronic Driver having an in built

Surge Protection of 2.5kV, Adjustable wire suspension, Protection class I, IP20.

12 Digitally signed by RAJ PAL

Supply, Installation, Testing, Commissioning of Surface Mounted luminaire Super Slim with

LED(Light Emitting Diode) system power: 15W, luminous flux of luminaire 750lm, colour

temperature of 4000K, CRI>90, constant voltage driver, energy efficient LEDs, direct light

7 MR emission, profile in aluminium, Anodized, Opal diffuser for uniform illumination, external Nos 22.00 3500.00 77000.00

DALI control gear

Protection class II, IP20

Supply, Installation, Testing and Commissioing of LED Recess luminaire with LED(Light

Emitting Diode) maximum system power: 28W, 120 LM/W system efficacy, colour

temperature of 4000K, neutral white, 230V constant current driver, 70% of luminous flux

after 50,000 operating hours, energy efficient LEDs, CRI>80, R9>0, minimum luminous

8 MR flux of 3360 lm, MacAdam 3, T.H.D≤5%, driver efficiency ≥ 88%, surge protection of 2.5kV, Nos 16 3053.00 48848.00

direct light emission, Aluminium extrusion body, polyester white powder coat applied over a

5-stage pre-treatment, Triangular Prismatic diffuser for glare-free uniform light, UGR<16,

Electronic control gear or euivalent as per site requirement

Protection class I, IP40, L =1195mm, B = 295mm, H = 67mm, PH = 1500mm

13 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit,

1.10 with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS

PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent switch

etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed

1.55 PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

A.3 1.12 cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC Metre 6750 334.00 2254500.00

insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

1.24 including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 448 122.00 54656.00

1.24.5 6 pin 15/16 amp socket outlet Each 38 197.00 7486.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding

A.6 1.26 modular plate as required. Each 100 40.00 4000.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated

1.14 copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 50 334.00 16700.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 439.00 21950.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 146 1005.00 146730.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 150 1365.00 204750.00

14 Digitally signed by RAJ PAL

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured

cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(b) 3.5 C x 95 Sqmm XLPE cable RM 50 864.00 43200.00

(c ) 3.5 C x 70 Sqmm XLPE cable RM 50 680.00 34000.00

(d) 3.5 C x 50 Sqmm XLPE cable RM 50 510.00 25500.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 50 378.00 18900.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper conductor

C.3 MR armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI

(a) 4 C x 16 Sqmm XLPE copper cable RM 200 1446.00 289200.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 100 2253.00 225300.00

(c ) 3.5 C x 35 Sqmm XLPE copper cable RM 50 2686.00 134300.00

(d) 3.5 C x 50 Sqmm XLPE copper cable RM 50 3223.00 161150.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker

2.10 suitable for inductive load of following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But

D.4 without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 10 9081.00 90810.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual

2.14 current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

15 Digitally signed by RAJ PAL

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way for floor box.

E.2 MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor box box. Set 2 577.00 1154.00

Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box along

E.3 MR with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and single cable Set 2 12106.00 24212.00

outlet/ glavanized steel, paint RAL 7031 for floor box .

Supply, installation, testing & Commissioning of Specific Backbox for Wooden Flooring for Floor

E.4 MR Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and Set 2 6803.00 13606.00

single cable outlet/ glavanized steel, paint RAL 7031 for floor box.

Supply, installation, testing & Commissioning of flat support plate 8 module for integration of

Mechanism for Floor Box

Supply, installation, testing & Commissioning of waved support plates for 4 module (2x2) modules

E.6 MR for Floor Box Set 2 1533.00 3066.00

Supplying and fixing following modular switch / socket on the existing modular plate & switch box

1.24 including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 14 148.00 2072.00

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 100 1738.00 173800.00

E.9 (b) 225mmx38mm(GI) - 3 compartment Mtr 100 1420.00 142000.00

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the

intersection of raceways supplied completely with base and cover plates, height adjustable junction

box 65- 90 mm including all accessories ss plate of 3mm thick complete in all respect as per the

E.10 directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 420 47.00 19740.00

surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed conduit as

Supplying and Installation of following size perforated of painting with powder coating M.S. cable

trays of perforation of not more than 17.5% in convinient sections, joined with connectors

E.13 suspended from the cieling with MS suspenders including bolts and nuts painting suspenders etc

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 100 1137.00 113700.00

16 Digitally signed by RAJ PAL

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 SET 10 13838.00 138380.00

metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 1000 70.00 70000.00

G PANEL BOARDS

G.1 MR Floor Panels/ HVAC Panel

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA

sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors fabricated from

2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear access for

cable alley and with segregated bus-bar chamber with tinned aluminium bus bar and including

supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to

earth, powder coated painting and marking as specified. Switch boards complete as per schematic

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as detailed in

the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 125 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored sleeves

and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports

& their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB - 3 Nos.

(b) 40 Amps, TPN, MCB - 5 nos

Panel complete as above Each 2 200000.00 400000.00

G.2 MR UPS Output Panel

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA

sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors fabricated from

2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear access for

cable alley and with segregated bus-bar chamber with tinned aluminium bus bar and including

supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to

earth, powder coated painting and marking as specified. Switch boards complete as per schematic

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as detailed in

the Specifications

17 Digitally signed by RAJ PAL

Colour: Gray Powder Coated, as per approved sample.

One (1) nos, 125 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault

breaking capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored sleeves

and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size supports

& their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB - 2 nos

(b ) 40 Amps, TPN MCB - 4 nos

Panel complete as above Each 1 187083.00 187083.00

H SAFETY ITEMS

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2 mm

H.1 2.21 thick, and vitreos enamelled white on both sides and with iscription in single red colour on front Nos. 6 269.00 1614.00

side as required

I MR UPS SYSTEM

Supply, Installation, Testing and Commissiong of Hot-swappable Modular Type 60 KVA (2 no 20

kva module + 1 no of 20 kva redundant module)True Online Double Conversion UPS 3Phase Input

- 3Phase Output UPS having granular Architecture. Module size should be 20 kVA or below with

multi controller. IGBT Based Rectifier and IGBT Based Inverter Batteries:12 V, SMF

Amararaja/Exide with minimum VAH capacity of 48000 suitable for 30 minutes backup with each

ups Along with Accessories Rack, Interlinks, SFU, Parallel Kit, DC Cable Upto 5 Meters complete

in all respect as per the directions of the engineer in charge. UPS should have availability of Input

/Output isolator, Inbuilt manual bypass along with phase sequence corrector. UPS Efficiency shall

not be less than 91%. The UPS shall be have 5 years warranty and 2 years warranty on

Total of Electrical items 4940150.49 4414695.40

Amount after GST Multiplication factor on DSR Items @1.0633 52,52,862.01 44,14,695.40

18 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

EM 2022 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all

hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14

HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A

Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall

deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without

tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The

unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at

AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF

Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan

section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX

Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports,

vibration isolation, cord less remote control etc., suitable for operation on

2 2 single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS System. The cooling

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

Supply, installation, testing and commissioning of following minimum capacity 1 (ONE)-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-

filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section

with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

3 MR supports, vibration isolation, cord less remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS System. The cooling

capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall

type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise

fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic

expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc.,

4 3.0 suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The

unit shall have automatic force shut down provision in case of fire on receiving signal from BMS

System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19

Degree C WB temperature.

Digitally signed by RAJ PAL

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T" Joints

5 4 i.e. Refnet Joints/ Header with Insulation for refrigearnt piping

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete

6 5 with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric

nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid

lines, all accessories as per specifications etc. as required :

6.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 220 245.00 53900.00

6.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 315 331.00 104265.00

6.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 210 466.00 97860.00

6.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 300 588.00 176400.00

6.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 180 707.00 127260.00

6.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 180 865.00 155700.00

6.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 80 1022.00 81760.00

6.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 80 1108.00 88640.00

6.9 5.9 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 40 1170.00 46800.00

6.1 5.1 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 40 1230.00 49200.00

6.11 5.11 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 40 1265.00 50600.00

6.12 5.12 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 40 1309.00 52360.00

Supply, Laying, Termination of ISI Certified 2 Core 1.0 sq.mm ATSC, FRLS,PVC insulated,

Unarmored, Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with

proper ferrules, lugs and other necessary accessories. The spec shall meet the system

manufacturer specifications.

Supply, Installation, Testing and Commisioning of Central Controller with independent touch

screen having capability of catering maximum 64 IDU.

9 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as

Supply, installation, testing and commissioning of PVC drain water with necessary clamps, fittings

such as bends tees etc. and duly insulated.

40mm dia (9mm thick insulation) Rm 530 374.00 198220.00

Total HVAC WORKS 2288610.00 1561915.00

20 after GST Multiplication factor on DSR Items @1.0633 24,33,479.01 15,61,915.00

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - HVAC WORKS

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT Non DSR AMOUNT

VAV BOX (WITH INTEGRAL SOUND ATTENUATOR)

Supply and Installation of pressure independent rectangular VAV unit with integral sound attenuator made

of 22G GI sheet casing length 900mm consisting of 25mm thick 48kg/m3 density fiber glass wool covered

with tissue paper ,elliptical volume control damper , calibrated differential pressure sensor (DPT sensors) at

inlet complete with digital Thermostat.(All VAV shall be factory calibrated).

Supply, installation, testing and commissioning of Variable Frequency Drive (VFD)

MR 380-400 VAC, IP-54 Chassis, RFI class A1 (C2), No brake chopper.

a VFD upto 35 HP or as directed by the engineer in charge NOS 1 180000.00 180000.00

DUCT PRESSURE SENSORS

Supply, Installation and Testing of pressure sensors to be installed in supply air ducts. Quoted price

3.0 MR shall be inclusive of necessary conduting, copper control cabling from the sensors to the respective VFDs NOS 4 17500.00 70000.00

as per "Approved Shop Drawings".

4.0 Tube Axial Fan

Supply Installation, testing and commissioning of supply air Tube Axial flow fan of following capacity with

GSS casing and aluminium alloy impellers with high efficiency aero-foil sections, blades, the impeller directly

MR driven by TEFC induction motor suitable for 3 Phase 50 Hz 415 V ± 10 %, complete as required. This cost

a shall include the cost for suitable panel, DOL starter, breakers etc compete in all respect as per the

directions of engineer in charge.

9000 cfm at 15 mm static presuure for fresh air/exhaust air With Class "H" insulation. NOS 2 143910.00 287820.00

Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return air

path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring

return so as to close the damper in the event of power failure automatically and open the same in case of

5.0 16.20 power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The

damper shall also be closed in the event of fire signal complete as required and as per specifications.

(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)

GI Gravity Louver

6.0 MR Supply, installation, testing and commissioning of GI Gravity Louver complete with neoperene rubber

gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

7.0 VOLUME CONTROL DAMPER

MR Supply, Installation and Testing of GI box type volume control dampers as per the specifications and shop

a drawings. SQM 6 5900.00 35400.00

- For Rectangular Ducts

Digitally signed by RAJ PAL

Supply, Installation, Testing and Commisioning of powder coated GI sheet metal factory fabricated flat oval

ducting with fittings and gripple wire supports. The factor of gripple support to suit the duct weight with

necessary anchor fastners and hook arrangements with suitable thickness etc., confirming to SMACNA

standards. Duct should be fabricated by using CNC machines including neccesary civil works as per site

condition. The joints shall be seamless and ducts joining shall be done using rivets only. The ducts shall be

powder coated with RAL color as per architect approval. The complete ducting cost shall be including 9 mm

MR thick nitrile rubber thermal with insulation internally. The insulation used for factory lining shall be of self

a Thickness 0.63 mm sheet SQM 400 1721.00 688400.00

b Thickness 0.80 mm sheet SQM 200 2024.00 404800.00

c Thickness 1.00 mm sheet SQM 80 2340.00 187200.00

d Thickness 1.25 mm sheet SQM 40 2900.00 116000.00

Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control

dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume

control dampers complete as required

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium

volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume

control dampers with anti smudge ring & removable core.

Supply, Installation, Testing of 125mm deep antivibration flexible joints at the outlet of air handling

13.0 MR units/ductable split units//inline fans. Flexible connections shall be constructed using imported fire retardant RM 50 1440.00 72000.00

fabric with extruded aluminium frame/flange on both sides of approved make.

Supply, Installation, Testing and Balancing of linear slot diffusers as per the approved shop drawings and

specifications. Each slot shall be 25mm wide. The diffuser face shall be a one piece extrusion so there are

no visible joints. Slot diffusers shall be complete with end caps either as end plates or end angles or integral

part, air control blades etc. Slot diffuser have a variable neck length and the diffuser face could be optionally

14.0 MR be fitted to the plenum box on site. Diffuser shall have provision to access collar dampers for air balancing.

All Return air diffusers in false ceiling to be properly supported from real slab using chains or gripple wires.

3 slot/2slot, powder coated extruded aluminium diffusers of approved colour & shade. SQM 6 12500.00 75000.00

Supply, Installation and Testing of Bird Screens with GI wire mesh to be installed at the suction of fresh

15.0 MR air/discharge of Exhaust air as per the specifications and shop drawings. Sample of bird screen to be got SQM 6 5436.00 32616.00

approved from consultants and Clients prior to procurement.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile

rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints

16.0 shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per

specifications and as required.

Digitally signed by RAJ PAL

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool

having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre

17.0 16.21 covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside SQM 4 708.00 2832.00

surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and

as per specifications

Supply, Installation, Testing and Commissioning of Air Purification systems in the specified areas where

AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air quality by

using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters. The Needlepoint brushes shall be

designed to properly release equal amount of positive and negative ions in the supply air,>400Million

ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM, with universal

18.0 voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will indicate ionizer

MR functionality. The unit shall have capability to be switched on 24/7 and shall have weathertight conduit of

minimum 6ft length.System should kill microorganisms and pathogens and backed with Independent lab test

reports on the real virus and not surrogate. The system also should reduce odors, TVOC’s and reduce

particle/particulate matter/PM2.5/PM10. The products should be UL 2998 listed with zero Ozone

Smart Indoor Air quality monitor to measure Air quality parameters including AQI, PM1, PM2.5, PM10, CO2,

Humidity and Temperature. In addition to the mentioned sensors of the base device, you can customize it to

measure more parameters by adding extra sensors. This monitor should be a 3-tier architecture including

sensor Hardware, secure cloud infrastructure, monitoring apps including dashboard, android/IOS apps,

20.0 MR where ever requires. Dashboard should be customisable and IOT (Internet of things) enabled with view and

management for all of your locations on one dashboard so that you can easily identify and address any air

quality issues. Sensors should be soft calibratable. The System should be capable of providing periodic

Preventive maintenance for automated after sales support service in form of notification/ alerts and user

interaction through dashboard application.

Air Quality Monitor Nos 1 7580.00 7580.00

Supply, installation testing and commissioning of Router / Supervisory Controller which will manage the VAV

information and communicates on BACnet®/ LONWORKS® protocol to monitor and Control the VAVs from

BMS software on PC in accordance with the approved shop drawings and technical specifications.

Connecting the final daisy loop from all VAV to Supervisory Controller shall be part of the scope. The

communication between Supervisory controller and BMS software in PC should be on IP. Cost include

powder coated Panel for Supervisory Controller of required size with 24 Volts provision which includes

power cable, plug, transformer and with all necessary accessories for mounting on wall in accordance with

the approved shop drawings and technical specifications.

Supply, Laying, Termination of ISI Certified 2 Core 1.0 sq.mm ATSC, FRLS,PVC insulated, Unarmored,

Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with proper ferrules, lugs and

other necessary accessories. The spec shall meet the system manufacturer specifications.

Supply, Laying, Termination of ISI Certified 4 Core 1.0 sq.mm ATSC, FRLS ,PVC insulated, Unarmored,

Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with proper ferrules, lugs and

other necessary accessories. The spec shall meet the system manufacturer specifications.

Supply & Laying of ISI Certified 1" dia PVC Conduit with bends, collar, saddles, saddle base and other

accessories for Signal Cable / DDC Communication Cable

TOTAL HVAC WORKS 624354.0 3506810.0

Amount after GST Multiplication factor on DSR Items @1.0633 6,63,875.61 35,06,810.00

Digitally signed by RAJ PAL

Schedule of Quantities: IT PASSIVE

S No Item Description UoM QTY Rate DSR Amount NDSR Amount

Supply Installation Testing & Commissioning of Cat6A UTP 24 AWG Patch Cord Patch cord (2 mtr.): 6A UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High

Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100- Base-T and 1000-Base-T. Available In LSZH Jacket-

Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 3 Prong Design for accurate termination, 50µ" Gold Plated Contacts , Insulation Thickness 0.16mm, 100% Factory Tested ,

1 Transparent Boot Cable Assemblies.ETL Verified 4 connector channel performance with MTPL up to 635 MHz, and registered under a ETL Followup Program. Complaint to RoHS Directive Set 284 325.00 92,300.00

2011/65/EU and (EU) 2015/863. OEM should have ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and and should have a certified PMP, CDCP and ITIL on the OEM’s payroll sitting in

India whose services can be utilized for this project for Data as per given Specification etc. all complete

Supply Installation Testing & Commissioning of Cat6A UTP 24 AWG Patch Cord Patch cord (1 mtr.): 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High

Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100- Base-T and 1000-Base-T. Available In LSZH Jacket-

Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 3 Prong Design for accurate termination, 50µ" Gold Plated Contacts , Insulation Thickness 0.16mm, 100% Factory Tested ,

2 Transparent Boot Cable Assemblies.ETL Verified 4 connector channel performance with MTPL up to 635 MHz, and registered under a ETL Followup Program. Complaint to RoHS Directive Set 284 275.00 78,100.00

2011/65/EU and (EU) 2015/863. OEM should have ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and and should have a certified PMP, CDCP and ITIL on the OEM’s payroll sitting in

India whose services can be utilized for this project for Data Jack Panel end as per given Specification etc. all complete

Supply, Installation, Testing and Commissioning of loaded Patch Panel 24 Port Cat 6A U/UTP ,The Cat-6Atransmission performance is in compliance and Exceeds ANSI/TIA/EIA-568.2-D

Standard. Supports 1000-Base-T. 90 Degree (Top Entry) or 180 Degree Punch Down Design for Convenient Network Terminations, Individual replaceable jack module panel design as

3 applicable.UL Listed, Complaint to RoHS Directive 2011/65/EU and (EU) 2015/863 and ASTM B 117 Certified. OEM should have ISO 9001:2015, ISO 14001:2015and ISO 45001:2018 or Nos 13 12,500.00 1,62,500.00

latest.All networking passive material (Fiber Cable, Copper Cables, Networking Racks and their connectivity components) should be from one OEM make only for Data as per given

Specification etc. all complete

4 Supply Installation Testing & Commissioning of 1 uPVC Cable Manager as per given specification etc. Nos 13 1,250.00 16,250.00

5 Supply, Installation, Testing & Commissioning of Mounting Hardware pack of 10pcs as per given specification etc. all complete Nos 5 200.00 1,000.00

6 Supply, Installation, Testing & Commissioning of 42U 800mm800mm Closed Network Rack with Castors, 6/16Amp PDU with fuse, 4X Fans standard accessories as per given Specification Nos 2 65,000.00 1,30,000.00

etc. all complete

Supply, Installation, Testing and Commissioning of Information Outlet Set(I/0) : Single/Dual Face Plate Square (86 x 86mm) x 12 mm Shutter on Face Plate Two Piece design : Mounting

Frame and Cover Plate Should support UTP and STP Jacks Cat5e, Cat6 and Cat6A Plug Reliability : 750 Cycles minimum Cover Material : ABS UL94-V0 Base Material : ABS- UL94-V0 Dust

7 Cover Material : ABS-UL94-V0 ,Should have Robust and installer friendly design Surface Mount Boxes for Face Plates for a variety of media including voice and data, Audio, video and CATV Nos 284 214.00 60,776.00

distribution to the work area. Material : ABS, Shape : Square Size : 86 x 86 , White colour. Complaint to RoHS Directive 2011/65/EU and (EU) 2015/863. OEM should have ISO 9001:2015,

ISO 14001:2015, ISO 45001:2018 and should be present in India for at-least 10 years or more

Supply,lnstallation,Testing & Commissioning of 4 pair Cat6A U/UTP Cable in the existing surface/ recessed steel/ PVC conduit as required (Approx. Cable length per Box: 305 mt): The 4 pair

Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568- C.2 and ISO/IEC 11801 Class E, 4 twisted pairs separated by internal HDPE Cross Separator.

Full separator. Half shall not be accepted. Rip Cord is must,lnsertion Loss of 32.8 db/l00m at 250 MHz ,Cable should support operating temperature from -20°C to +60"C Cable support

8 Conductor Resistance ≤ 9.38ꭥ/100m Max., Cable support Delay Skew:< 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 @100 MHz. and Propagation Delay @250 MHz : 536 Nos 56 25,935.00 14,52,360.00

ns/100m, ETL Verified 4 connector channel performance with MTPL up to 635 MHz, Complaint to RoHS Directive 2011/65/EU and (EU) 2015/863, OEM should have ISO 9001:2015, ISO

14001:2015 and ISO 45001:2018 or latest.All networking passive material (Fiber Cable, Copper Cables, Networking Racks and their connectivity components) should be from one OEM make

only as per specification etc. all complete

Supply, Installation, Testing and Commissioning of Information Outlet Category 6A Keystone is Punch Down Type 50 Micron Gold Plating Suitable For 23~24 AWG Stranded and Solid Wire.

Skilled Design on Jack and PCB. Ergonomic Design and Easy Termination, Compliant to T568A and T568B Wiring Schemes, Backward compatible with both RJ11/RJ12 Plug,Housing : High

9 impact flame retardant plastic, UL 94V-O rated. ETL Verified 4 connector channel performance with MTPL up to 635 MHz, Complaint to RoHS Directive 2011/65/EU and (EU) 2015/863. OEM Nos 284 522.00 1,48,248.00

should have ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and should be present in India for at-least 10 years or more. Blue Colour for Data as per specification etc. all complete

Supply, Installation, Testing and Commissioning of 6 core MM OFC Cable

24 Digitally signed by RAJ PAL

Schedule of Quantities: Integrated CCTV SYSTEM

S No Description of Items Qtty Unit Rate Amount

SITC of 5MP IR Vandal Proof Dome Network Camera Lens Size: 3.0mm – 13.5mm

motorized vari-focal lens, Aperture F1.4 – F3.2, NDAA Compliance must approved, Security:

SSL Encryption, Multi-User Authority, IEEE802.1x, IP Filtering, HTTPS , IR Distance : 30M

IR, Memory Support : Micro SD 512 GB, Two-way Audio Communication supported, Audio

Compression Algorithm: ADPCM 16K, G.726, G.711 u-Law, G.711 a-Law DC12V/PoE, IP67

and K10 rating, Image Sensor: 1/2.8” CMOS Maximum Resolution: 2592 x 1944, 11, Video

1920x1080, 1280x720, 640x360, Video Compression : H.265, H.264, Dynamic Range:

120dB, True Day & Night: Yes (ICR) MJPEG Scanning Mode: Progressive Scan COLOR :

0.15 lux @ F2.0 B/W : 0 lux (IR LED ON), Shutter Speed (Auto) 1/10000s~1s, True

1 day/night, WDR 120db, 3D DNR, HLC & BLC, Quadruple streams, Four Streams individually 18 Nos 55,545.00 9,99,810.00

configurable, Privacy Masking: 8 Zone, Camera shall confirm ONVIF Profile S, Smart codec

by ROI, MTBF time 1,25,000 Hours @40 degree (Report to be submitted), Inbuilt Analytics

Motion Detection, Alarm in, Tampering and Trip Zone, Shall provide Quadruple streams,

Object , SSL Encryption, Multi-User Authority, IEEE 802.1x, IP Filtering, HTTPS , Operating

Temperature: -40°C ~ +55°C (-40°F ~ +131°F) , Operating Humidity: 0% to 90% non-

condensing, Certification: BIS/UL, FCC, CE approval. MAC Address: The MAC address of

the proposed IP cameras must be registered in the same name of the OEM. The IP Camera

OEM must confirm that the MAC address of the surveillance cameras; OUI must be in the

name of the OEM. etc complete as per specifications of this and directions of Engineer-in-

25 Digitally signed by RAJ PAL

Supply, Installation, Testing & Commissioning of 32 Channel IP network video recording

capability Rack mount NVR with Redundant Power Supply and minimum 8 Slots, should

support H.264/H.265 compression, network incoming throughput of 850 Mbps and 12MP

recording resolution, time division multiplexing, real time recording of multiple cameras,

storing digitized and compressed images on internal hard disk drives for fast search and

retrieval either locally at the unit, or from a remote workstation using a Graphical User

Interface (GUI), should allow all connected cameras to be discovered and configured

automatically, simultaneous live view, record, play back, data transmission in real time,

maximum throughput of 400 Mbps, UHD 1920 ips, support H.264/H.265 compression, 2X –

12X digital zoom in live view mode, 2X – 12X digital zoom in playback mode, time lapse,

event, time lapse + event, pre / post-event, panic recording schedule, recording bitrate

control mode: CBR and VBR, alarm, audio, motion, trip zone, video loss, text-in, system

2 event triggering, fan error, record failure, storage related alerts and alarm in error, email, 1 Nos 3,75,529.00 3,75,529.00

remote notification (call back) to remote work stations, mobile device push notification, Time-

lapse, Event log, Motion, Thumbnail, Text-in search options, SSL, Password encryption

options, network keyboardfor controlling the NVR and PTZ, 1 Gigabit Remote Client port, 4

Gigabit ports, ONVIF compliant , output interface 1 HDMI (up to 4K), 8 internal SATA ports

(10TB per SATA) with recording capacity up to 80 TB or more , RAID support as 1,5,10 -

user may choose & configure as per security needs on internal SATA , redundant dual power

supply as failover,2 x USB for backup /upgrade etc., complete as required. The NVR should

have internal Admin service, monitoring servics, Left object detection. In addition the NVR

should be compatible to AI cameras, ANPR cameras for future. The NVR should also

support Failover services in 10:1mode. Certification: BIS/UL, FCC, CE . etc complete as per

specifications of this and directions of Engineer-in-Charge.

Supply Installation Testing Commissioning of 6 TB HDD as per specifications of this tender

etc complete as required and directions of Engineer-in-Charge.

Supply Installation Testing Commissioning of LED Display 55" Smart LED TV 138 cm/ 55"

colour Ultra HD (4k), professional/commercial monitor having 24 X 7 operation, with USB

Port 2, HDMI Port 3, HDMI (ARC), 2 channels, 20 W Speaker output power, AC4 audio

4 format, Stream content from devices, Wifi facility, dolby digital plus surround sound 1 Nos 1,05,000.00 1,05,000.00

technology i/c making connection, testing etc. complete as required. as per specifications of

this tender etc complete as required and directions of Engineer-in- Charge.

26 Digitally signed by RAJ PAL

Integrated Access Control System

S No Description of Items Total Unit Rate DSR Amount NDSR Amount

Supply, installation, testing and commissioning of Enterprise level Application including Time Attendance-Access Control,

GUI, Antipass back, Reports in Inbox, with Unlimited Users, Door Scheduling, Unlimited Client logins, Event Notification,

POP ups, Mustur Points, Area Control, Time base access and alerts. AI Dashboard for People Counting,, Occupancy

Manager, Software should be VAPT approved and should provide per reader license, Sofware should expandable and

scalable and have capability in future integration of Elevator management, Template management and card priting

,Integrated credential issuance application inclusive of card template designing, card printing, finger print enrollment, key

management, contactless card reader/writer & contact card reader/writer, Software shall support Access IP and Interface

Controllers & Card Readers, Biometric Readers & Enrolment Devices, Card Printers, Card Encoding Devices, Smart

Cards, Mobile/Digital Credentials, BLE/NFC based access readers,Flap Barrier, Boom Barrier etc, Software Login shall

be secured by providing a strong password implementation policy, enforcing strong passwords with minimum/maximum

limits, use of upper-case & lower-case characters, and numeric, and special characters. It shall also support policy for

password expiry, portal lockout, audit trails, use of captcha etc.

Server Browser communication shall be secured using Hypertext Transfer Protocol using Secured Sockets Layer [HTTPS

Server Application Security shall be ensured by developing the software according to ISO 27001 Standards or Information

Security & Management Systems (ISMS). Further, it shall be certified for any Vulnerability Assessment & Penetration

1 Testing (VAPT) by a recognized 3rd party testing authority. GDPR, SOC1,SOC2 & ISO20018 compliant.

Access Controllers to server communication channels shall be secured using TLS or AES 256 Bit Encryption.

Access Controllers shall have IPV4/IPV6 (greater connection integrity and security), SNMPv3/ v2c, centralized biometric

template management, Cryptographic module, like OpenSSL FIPS Object Module RE, Crypto memory chip for Biometric

Templates, credential & user info, DIP Switch Toggle sets 5 minutes to disable web page access, Strong Password

Enforcement (8-64 characters), HTTPS secured web interface for configuration.

Access Controllers to Subordinate devices like door modules, Input & output modules shall be secured by using AES256-

bit Encrypted RS485 Channel.

Reader to Controllers/Door Module communication channel shall be secured using ODDP Secured Channel (SC)

Readers shall have Secured Elements & Cryptographic Operations for the protection of Card reader keys.

Card/Credential to Reader communication shall be on 13.56 Mhz Radio Frequency deployed with Symmetric Key

Encrypted Data Transmission.

Card/Credentials shall have encryption key-based secured user memory access.as per specifications of this tender etc

complete as required and directions of Engineer-in-Charge.

Supply, Installation, Testing & Commissioning of Integrated Visitor Managment System

a.Mandatory fields for visitor pass issue

b. Whether appointment is must for every visitor

c. Whether Access Card issue to visitor is compulsory

d. Whether visitor request to be approved by the group administrator

e. Whether Email based approval

f. Sending of Email/SMS to the approved visitor

g. Sending Email/SMS to the employee on visitor arrival

h. Pop up on Employee’s system on visitor arrival

i. Banned visitor notification

j. Lapse Time (Time after which appointment will get expired)

k. Default Departure Hours (if some other time is not set)

l. Pre Appointment hours ( Time before the scheduled appointment during which pass can be generated) all complete as

per tender specs.

27 Digitally signed by RAJ PAL

Supply, Installation, Testing & Commissioning of Access IP Controller with Enclosure and Power Supply: 2 Door 4 Reader

with RS485 OSDP, Security Features: Authorized IP address filtering, IP Client Proxy Host communications protected by

TLS 1.2/1.1 or AES 256/128; Crypto memory chip, IO Expansion connection protected by AES Capacity: Cards/Users :

240000 Offline Event Log: 5,0000 & Communications Built in TCP/IP, IPV4, IPV6, RS-485, Inputs: Eight

unsupervised/supervised, Two unsupervised dedicated for cabinet tamper and UPS fault monitoring, Outputs: Four

relays, Power : 12 to 24 Vdc 10 %, 500 mA maximum , Supports up to 520 inputs and 516 outputs, 16 card formats per

4 active reader, 8 per offline reader, Open Supervised Device Protocol (OSDP) and OSDP SC compliant, Anti-passback 1.00 No. 2,01,294.00 2,01,294.00

support, Area-based, reader-based, or time based, Nested area, hard, soft, or timed forgiveness, Encrypted database,

Supports up to nineteen (19) digit card numbers, Intrusion Alarm Functions: Area monitoring, Standard alarm masking,

Fire Integration; open all doors from hardware itself, Temperature: -55 to +85 °C, storage, 0 to +70 °C, operating,

Humidity: 5 to 95 % RHNC, Micro USB Port, SD card upto 8 GB. Certifications:UL294 Recognized, FCC Part 15 Class A,

CE Compliant, RoHS, NIST Certified Encryption etc. as per specifications of this tender etc complete as required and

directions of Engineer-in-Charge.

Supply, Installation, Testing & Commissioning of contactless smart card reader(s).

1. The Reader shall be designed to securely read, interpret, and authenticate access control data from virtual and digital

credentials as follows:

13.56 MHz contactless smart cards (Mifare/Desfire)

Dynamic & Classic QR codes

PIN shall also be available as an option.

2.The contactless smart card reader shall provide customized security protection through the support of dynamic QR code

credentials to enhance security by eliminating the possibility of generating duplicate QR codes.

3.The contactless smart card reader shall facilitate QR code reading from any form factor like paper, PVC cards, and/or

digital devices like smartphones.

4.The contactless smart card reader shall be able to decode AES128bit encrypted dynamic QR code.

5.The contactless smart card reader shall have a capacitive touch PIN pad as an option.

6.The contactless smart card reader shall provide a typical read range for 13.56MHz cards up to 6cm.

5 7.The contactless smart card reader shall provide a typical QR code read range of 30cm to 150cm. 4.00 No. 34,788.00 1,39,152.00

8.The contactless smart card reader shall enable QR code-based secure access with a mobile device by leveraging

standard communication technologies that work with both iOS® and Android™ operating systems.

9.The contactless smart card reader shall have a unique electronic serial number.

10.The contactless smart card reader shall be managed by the Reader Manager Mobile App.

11.The contactless smart card reader shall provide enhanced user feedback options through the use of clear and bright

Red LED, Green LED, Buzzer -Active Low (RGB).

12.The contactless smart card reader shall allow secure installation practices by providing the ability to transmit an alarm

signal via integrated tamper relay if an attempt is made to remove the reader from the wall, there shall be an output from a

reader that is configurable with the access controller.

13.The contactless smart card reader shall enable ease of installation through identical wiring methods as legacy

13.56MHz readers.

14.The contactless smart card reader manufacturer shall provide a full product line of compatible products including

readers, readers with integral keypads, QR codes, and cards without the need for special programming.

Supply, Installation, Testing & Commissioning of Biometric Machine

• User identification in 1 secondminimum 500/1000 users and Expandanbe up to 10,000 users (30,000 templates) in 1:N

identification mode, 2.8” QVGA color touchscreen and buzzer 250,000 IDs in authorized user list, 1 Million logs. CPU:

ARM® Cortex-A9 core 1GHz

• Linux Operating System, Fake finger detection

• Duress finger

6 • FBI PIV IQS certified optical fingerprint sensor 1.00 No. 1,22,494.00 1,22,494.00

• Network/Communication: - Ethernet, RS485, USB, Wiegand and OSDP support, Integrated Smart Card Reader, Internal

storage capacity: 512MB Flash, 512MB RAM, Operating conditions: - Temperature: -20°C to 55°C (-4°F to 131°F) -

Humidity: 10% to 80% (non condensing).

• Ingress protection: IP65

• EMC/Safety standards: - CE, CB, FCC, BIS - UL294, RoHS, REACh and WEEE complete as per specifications of this

tender etc complete as required and directions of Engineer-in-Charge.

28 Digitally signed by RAJ PAL

Supply, Installation, Testing & Commissioning of Smart card Frequency Excitation (13.56 MHz) Mifare smart Card,

7 distance upto 2.5" Memory Type EEPROM, 2K bit memory complies with ISO/IEC standards for thickness. Lifetime 50.00 No. 452.00 22,600.00

Warranty .etc. as per specifications of this tender etc complete as required and directions of Engineer-in-Charge.

Supply, Installation, Testing & Commissioning of Press to Exit Push Button Stainless Steel Heavy duty Stainless Steel

8 NO, NC based etc. as per specifications of this tender etc complete as required and directions of Engineer-in- Charge. 4.00 No. 1,388.00 5,552.00

Supply, Installation, Testing & Commissioning, Emergency Glass Break Unit Single Pole NO, NC Contact, etc. all

complete as per specs

Supply, Installation, Testing & Commissioning of Electro Magnetic Lock Single Leaf/ Double Leaf as per door design, Fail

safe type, Holding force: 272kg(600lbs), Inbuilt Door contact, Current Drain:320mA/12VDC, Built-in voltage spiker

10 suppressor to protect the lock body and equipments, lock body and armature with chemical plating anticorrosion finished, 4.00 No. 12,252.00 49,008.00

with LED light & brackets UL Listed etc. as per specifications of this tender etc complete as required and directions of

Engineer-in-Charge.

Supply, Installation, Testing & Commissioning of 8 core 0.75 sq mm Copper Flexible shielded RS485 OSDP

11 communication multi-stand Data Cable etc. all complete as per tender specifications of this tender etc complete as 200.00 Mtr 288.00 57,600.00

required and directions of Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of 4 core 0.75 sq mm Copper Flexible shielded communication multi-stand

12 Data Cable etc. as per specifications of this tender etc complete as required and directions of Engineer-in-Charge. 200.00 Mtr 182.00 36,400.00

Supply, Installation, Testing & Commissioning of 3 core 1.5 sq mm Shielded communication multi-stand Data Cable etc.

as per specifications of this tender etc complete as required and directions of Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of Server i7-7700T 2.9GHz Processor:

• Turbo max to 3.8GHz

• Support Intel vPro, AMT 11 remote management

• Support TPM 2.0 Function

• Up to 4 x 2.5" SATAIII Storages,as per specifications of this tender etc complete as required and directions of Engineer-

29 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - FIRE ALARM

S NO DSR/MR DESCRIPTION QTY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

SITC of UL268 10th edition compliance and FM approved Intelligent Addressable multi-

criteria detector (optical and thermal sensors) complete with standard base, facility to mount in

different comprehensive environment, Tri-color detector-status LED with 360° view,

microprocessor circuitry with error check; detector self-diagnostics and supervision programs,

Rate-of-Rise Detection: 15°F/ min. (8.3°C/ min.) - Fixed: 135°F (57°C), Field

programmable as rate-of-rise or fixed temperature, Polarity insensitive, Superior EMI and RFI

immunity, RoHS compliant. Detector shall have in-built isolator for better reliability,

circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator

feature in detector shall consider Isolator base in place of standard base OR separate

Isolator before and after every detector to comply the same without any extra cost. It shall be

include surface/ recessed MS Box complete with all connections etc as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

Box having two LED, metallic cover complete with all connections etc as required.

SITC of UL Listed and FM approved Intelligent Addressable Rate of Rise and Fixed

temperature detector complete with standard base, Seven (7) field-selectable settings in a

temperature range of 135°F-174°F (57.2°C-78.9°C), a low-temperature warning of 40°F

(4.4°C), facility to mount in different comprehensive environment, Tri-color detector-status LED

with 360° view, microprocessor circuitry with error check; detector self-diagnostics and

3 MR supervision programs, Field programmable as rate-of-rise or fixed temperature, Polarity Nos 2.00 3,059.00 6,118.00

insensitive, superior EMI and RFI immunity, RoHS compliant. Detector shall have in-built

isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not

having in-built Isolator feature in detector shall consider Isolator base in place of

standard base or separate Isolator before and after every detector to comply the same without

any extra cost.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

SITC of UL Listed Sounder cum Strobe rated at 75 dBA @ 3m for Audible annunciation and

75cd flashing at 1 Hz for visual indication.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7),

Control Module with built in dual isolator, polarity insensitive, Tri color LED for status

(Green for Normal,Yellow for Faulty and RED for activation), Operating Temp and RH:

0-49 deg C and <=95%. Module shall have in-built isolator for better reliability, circuit

integrity and advanced fault finding. Manufacturers not having in-built Isolator feature

shall provide separate Isolator before and after every Module to comply the same without any

extra cost. (For AHU & Staircase Pressurization Fans, Hooters/ Sounders/ Strobes etc.)

Supplying, installation, testing & commissioning of addressable phone control

module complete as required.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7),

Monitor Module with built in dual isolator, polarity insensitive, Tri color LED for status

(Green for Normal,Yellow for Faulty and RED for activation), Operating Temp and RH:

0-49degC and <=95%. Module shall have in-built isolator for better reliability, circuit

integrity and advanced fault finding. Manufacturers not having in-built Isolator feature

shall provide separate Isolator before and after every Module to comply the same without any

extra cost. (For Flow Switch Monitoring/ Gass suppresion Integration etc.)

30 Digitally signed by RAJ PAL

SITC of UL268 10th edition compliance and FM approved Intelligent Addressable Duct

detector with 10ft sampling pipe (optical and thermal sensors) complete with standard

base, facility to mount in different comprehensive environment, Tri-color detector-status

LED with 360° view, microprocessor circuitry with error check; detector self-diagnostics

and supervision programs, Rate-of-Rise Detection: 15°F / min. (8.3°C/ min.) - Fixed: 135°F

9 MR (57°C), Field programmable as rate-of-rise or fixed temperature, Polarity insensitive, Superior Nos 1.00 19,551.00 19,551.00

EMI and RFI immunity, RoHS compliant. Detector shall have in-built isolator for better

reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built

Isolator feature in detector shall consider Isolator base in place of standard base OR

separate Isolator before and after every detector to comply the same without any extra cost.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7),

Manual Pull Station Single Action, Shock and Vibration Resistant, with built in dual

isolator, polarity insensitive, Tri color LED for status (Green for Normal,Yellow for

Faulty and RED for activation), T-45 Key Reset lockset for easy maintenance, Operating

Temp and RH: 0-49degC and <=95%. MCP shall have in-built isolator for better reliability,

circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator

feature shall provide separate Isolator before and after every MCP to comply the same

without any extra cost.

Supplying, installation, testing & commissioning of 8 zone, voice alarm controller with

USB, MP3 player (including 8 zone button paging station) with seamless integration facility with

11 MR main fire alarm panel for voice evacuation. 3. The controller shall comply standards of BS Nos 1.00 2,79,832.00 2,79,832.00

EN54-32 & EN608409, Controller shall have AC 230V and DC24V battery input. Auto

switch into the battery backup when AC fails.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete

Supplying, installation, testing & commissioning of Digital Amplifier Single Channel

13 MR complete as required. Nos 1.00 1,35,938.00 1,35,938.00

Supplying & laying of 2x1.5 sqmm fire alarm FS armoured cable, 600/1000V rated with

14 MR annealed copper conductor having XLPE insulation, steel wire armouring & FS outer Metre 800.00 254.00 2,03,200.00

sheath complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

existing surface/ recessed steel conduit of following pairs, cores and size including

connections and interconnections etc. as required.

Supplying and Laying of 2x1.5sqmm FS unarmourd cable

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and

accessories like coupler etc. as required.

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power

Battery backup complete as required.

SITC of Remote Paging Microphone should be fully digital connected via CAT6 Cable

with Controller. The Microphone should have capability to make announcement in 96

Zones and have all call facility. The Microphone shall have ability to control music and should

be able to route the music in zones. Microphone should have maximum zones capacity up to

18 MR 120 Zones. The Microphone should have LED indication for the different faults, the unit Nos 1.00 1,60,930.00 1,60,930.00

shall be able to indicate AC, DC, Fault, Mic and Test status through LED.. The Unit shall

have 2 RJ45 ports for Microphone so that the other microphone shall be able to link

with the unit. The Microphone shall have ability to Communication limit up to 600 Meters

Supply, Installation, Testing and Commisioning of Interface Card for BMS fire

integration compatible with exisiting system

31 Digitally signed by RAJ PAL

Supply, Installation, Testing and Commisioning of repeater panel having 160 character

20 MR display with backlit control compatible with existing system Nos 2.00 96,646.00 1,93,292.00

SITC of UL864 10th Edition UL Listed and FM approved Analog Addressable 4 Loop

Fire Alarm control panel. Panel shall be running on full digital protocol with 32 bit

Microprocessor . The Panel shall be complete with 6" color touch screen LCD Display. Fire

alarm panel should have minimum capacity of 2500 detectors and devices in any

combination and capable of making upto 50 loops in single panel using additional

Loop cards. Each addressable loop shall be capable of taking 250 addresses per loop

configuring either as all detectors or modules or any mix of both. The panel shall have

the Fire Fighter Touch Screen Graphical Display panel to inform & guide Fire Fighters

for carrying out Fire Fighting operations. The display shall have Hazmat icons

indicating the presence of any explosive gas, liquids, poison,fumes etc. If this feature

21 MR is not available in fire alarm panel then additional fire fighter touch panel along with Nos 1.00 4,44,220.00 4,44,220.00

necessary hardware and software should be provided by the manufacturers for fire

fighters to guide them during emergency without any extra cost. To expedite system

troubleshooting, the system cards shall have ground fault detection and diagnostic LEDs

by card. In the display,simple building floor plan can be loaded in bitmap or jpeg format, On

the map, the user will see an icon indicating the location of the event in the building in

addition to a 'You-Are-Here' symbol to tell the responding person exactly where they are in the

building in relation to the event. The system shall be polarity insensitive. The panel shall

support degrade mode operation and shall have battery backup of 24 hrs in normal

condition and 30 minutes in Alarm condition.

32 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges,

18.7 tapers, nuts bolts, gaskets etc. and fixing the pipe on the

1 wall/ceiling with suitable clamp/support frame and painting

with two or more coats of synthetic enamel paint of

required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree

centigrade with required accessories :

18.21.1 Pendant type 160 Each 522.00 83520.00

Supplying, installation, testing & commissioning of sprinkler

flexible pipe (UL Listed) of stainless steel complete with 15

NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line

3 18.25 (Inlet) 25mm NPT male thread to sprinkler head (Outlet)

15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required.

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 2 NOS 12912.00 25824.00

Mechanical Foam gas cartridge type. 9 Kg capacity

ABC dry powder stored pressure type 6 kg capacity

Amount after GST Multiplication

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-SIGNAGE

S No DSR/ MR Description Quantity Unit Rate DSR Amount NDSR Amount

RECEPTION SIGNAGE : Providing and

fixing of signage made out of acrylic

sheets of 6mm thickness. Height of each

1 MR letter will be 450mm and in width 1 Nos 202717.00 2,02,717.00

proportionally. Letters to be fixed on the

partition using industrial grade adhesive.

Depth of each letter to be 75mm

OTHER SIGNAGE :Providing and fixing

of signage made out of acrylic sheets of

6mm thickness. Height of each letter will

2 MR be 250mm and in width proportionally. 1 Nos 135145.00 1,35,145.00

Letters to be fixed on the partition using

industrial grade adhesive. Depth of each

letter to be 36mm

Providing and fixing room signage of

acrylic signage made of 3mm acrylic with

texture wood finish pasted/ white milky

3 MR acrylic 3mm laser cut pasted on top with 80 Nos. 2056.00 1,64,480.00

proper names Witten using plotter cut

vinyl or laser cut acetic sheets in

approved colour. Size 300x125 mm. TOTAL 5,02,342.00

Digitally signed by RAJ PAL

BOQ OF FURNITURE ITEMS

Item Description Technical Specifications UNIT TOTAL QTY Unit Rate

CMD Room Table : Overall Size : W 2300 x D 1000 x H 750mm & Side Unit Extention: W 1400 x D 550 x H 750mm. Table Top: 25mm thick pre

laminated particle board with 2mm PVC edge lipping supported on V Shape aluminium die cast connectors of min size 430 mm L x 110 mm H x 25

mm Thick. 4 Connectors on Main table & 2 on side unit shall be provided. All sides of the worktop except corners of main & side table shall be

provided with 2mm thick alumimum extrusion of 40mm + 25 mm + 30 MM + 8 mm formed into horizontal & vertical direction to enable support as

well as top surface coverage. edge surface extrusion supporting the worktop to be tappered towards top. Support: End Legs: 25mm thick pre

laminated particle board with 2mm PVC edge lipping & 3 equal drawer pedetal. Modesty Panel: 18mm thk pre lam board with 2mm PVC edge

lipping of 450mm Ht. Wire Management: Slide Connect with PVC cable dump. Slide connect Configuration - Standard switch configuration no

deviation 2 Power,2 USB Charger,1 Network,1 HDMI. Sufficient storage space to be priovided in the storage pedestal of the table having drawers at

1 CMD TABLE SUITE the main table & hinged door storage below the side unit. The main and the return table top will have 10 mm thick Euro bronze glass with white Nos 1 2,96,339 2,96,339

vinyl film hot laminated and Kuraray pvb interlayer. Back Unit Overall Size W 1500 x D 600 x H 750mm, Table Top: 25mm thick pre laminated

particle board with 2mm PVC edge lipping sides covered with 2mm thick anodised alumimum extrusion of same size as above supported on V

Shape aluminium die cast connectors of same size as above. Back: 25mm thick pre laminated particle board with 2mm PVC edge lipping. Shutters:

25mm thick pre laminated particle board with 2mm PVC edge lipping with brush steel handles and softclose drawer slides and hinges. The back

unit table top shall also have 10 mm thick Euro bronze glass with white vinyl film hot laminated and Kuraray pvb interlayer. The OEM shall have ISO

9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

High back Chair having back height of 770 mm and width of 380 mm from top & 500 from mid (lumbar) level. Seat Depth shall be 480 mm and seat

width shall be 540 mm at front & 450 mm at back. Armrest to Armrest distance of 680 mm. Seat height shall range between 410 mm to 470 mm.

Armest shall be finished with foam & leather on the user side & top with water fall edge to provide comfort to user & outside of armrests as well as

below back shall be finished with wooden texture. Below portion of armrest opening towards seat shall be finished with crome surface. Knee tilt

mechanism shall be provided having tilt tension adjustment & height adjustment at same level on right hand side of user & any position locking

2 level at the left hand side of user. Padded lumber support to be provided of height min. 200 mm. Back of the chair shall be finished with leather Nos 1 98,825 98,825

upto height of 600 mm & wooden texture finish upto 200 mm & leather below the wooden texture. Aluminium die cast pedestal having length of

prongs 310 mm with 50 mm height towards centre & 25 mm height outside. High Quality leather in beige or black to be suppiled. Twin wheel

castors to be provided. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard

Mid back Chair having back height of 610 mm and width of 380 mm from top & 500 from mid (lumbar) level. Seat Depth shall be 480 mm and seat

width shall be 540 mm at front & 450 mm at back. Armrest to Armrest distance of 680 mm. Seat height shall range between 410 mm to 470 mm.

Armest shall be finished with foam & leather on the user side & top with water fall edge to provide comfort to user & outside of armrests as well as

below back shall be finished with wooden texture. Below portion of armrest opening towards seat shall be finished with crome surface. Knee tilt

mechanism shall be provided having tilt tension adjustment & height adjustment at same level on right hand side of user & any position locking

3 CMD VISITOR CHAIR level at the left hand side of user. Padded lumber support to be provided of height min. 200 mm. Back of the chair shall be finished with leather Nos 6 95,875 5,75,250

upto height of 440 mm & wooden texture finish upto 200 mm & leather below the wooden texture. Aluminium die cast pedestal having length of

prongs 310 mm with 50 mm height towards centre & 25 mm height outside. High Quality leather in beige or black to be suppiled. Twin wheel

castors to be provided.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard

The overall size of discussion table in Dia. 900mm X 750mm H that is to be assembled at site. The table top shall be made up of 25mm thick Pre-

laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in circular

shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the

assistance of edge banding machine Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong

4 ROUND TABLE cross section of about 55mm on top, 45mm at bottom and of 725mm length to get 750mm table height, it acts as vertical structural support Nos 1 33,008 33,008

member, connected by a horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high

pressure Aluminium diecast connectors. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility &

Green Guard Certification

Digitally signed by RAJ PAL

3 Seater Sofa : Overall size shall be 2020 mm W x 1000 mm D x 880 mm H. Sofa inner frame structure shall be made from the combination of

treated solid wood and plywood having high quality webbing belts to ensure good strength, rigidity & stable construction to offer high durability.

There shall be extra padding between the armrest & the seat on both sides for better comfort & polyfilled in arms & backrest. The polyurethane

(PU) foam shall be used in Seat & back rest having 40 density and 32 density respectively. Seat to backrest angle should be ergonomically designed

5 3 SEATER SOFA to offer the best seating comfort. Seat height shall be normally between 16 to 18 inches and depth shall be between 20-22 inches. Sofa shall be Nos 1 77,243 77,243

elevated from ground by about 3 inches using Gold finished metal legs creating provision for easy cleaning & better look. Upholstery shall be of

high quality Leatherite offer the best feel & comfort.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing

facility & Green Guard Certification

The overall size of the Recliner shall be 850 mm width x 1050 mm height & depth 895mm and 1575mm when reclined. Height of the armrest from

the ground level shall be 600 mm. overall width of the armrests including top flap shall be 130 mm. The recliner shall electrically operated and

handheld remote shall be provided along with the recliner attached with flexible wire. The user shall be able to recline fully with the help of remote

and the foot resting flap shall automatically come out from below to expand the body to give comfort. The recliner shall also have the lifting feature

6 ELECTRIC Nos 1 90,497 90,497

OPERATED within remote to push the body from back & enable the user to get up from the recliner easily if required. The user touch surface of the recliner

shall be upholstered with Pure Leather and the other one shall be in matching leatherite.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2,

IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

The overall size of round table shall be 600mm dia x 750mm height.Table Top: 18mm thick Pre laminate particle board E1 norms with 2mm PVC

edge lipping on all exposed edges. Understructure shall be made of metal and shall have interconnected to each other and formed X- shaped.

7 CENTRE TABLE Nos 8 24,795 1,98,358

Understructure shall powder coated upto 40 to 60microns.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated

manufacturing facility & Green Guard Certification

CABIN TABLE Nos -

The Main table shall be of size 2000 L x 800 D x 760 & Side table size shall be 1600 L x 550 D x 660 H. The worksurface of the main table shall be

made up of 40mm thick E1 grade particle board with melamine finish. with 2mm pvc reverse water fall edge banding on automatic machine.

Tabletop corner shall be round. The modesty panel of the main table 400mm height shall be made up of 18mm thick Pre-laminate particle board E1

norms duly finished with 2mm pvc edge banding on automatic machine. The modesty panel shall be connected through L-shape Bracket connector.

The worktop shall be connected with the gable end with the help of aluminum corner shall have overall size of 800 L x 49 W x 45 H. Size of gable

end at the Top 800 width to connect the Aluminium corner and the bottom with 640mm width. Side unit - Side table shall be size 1600 L x 550 D x

660 H with 16mm thick E1 grade particle board with melamine finish with 2mm pvc edge bending on automatic machine. Fixed side return with 2

drawers, single swing door, open shelf and open space for CPU, with holes for customer put their sockets. Fixed side return shall have flexibility to

8 CABIN TABLE be placed left or right during time of first assembly.All the Drawer and shutters shall be operated by finger grove with the help of V shaped Nos 4 1,67,014 6,68,057

aluminium extrustion on the top of Drawer and shutter facia shall have overall size of 20 L x 34 H x 1.5mm thick. Wirebox on table top, with cover

for wire entrance only. Main table top of 40mm thickness Pre-laminate particle board shall be provided with suitable cut out through CNC Routed

Machine and a Cable Dump tray with PVC/CRCA material shall be mounted to hold switch and socket, Entire cable Dump tray shall be covered with

Aluminum extruded with injection moulded plastic side cover Flip up top of to access switch and socket. Cable Vertebra of PVC shall be provided to

enable wire management from floor to tabletop surface.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated

manufacturing facility & Green Guard Certification

The Overall Size shall be W 1200 x D 400 x H 750mm, Side & Front shall be made up of 18mm thick PLPB both E1 norms duly finished with 2mm

pvc edge band. Back shall madeup of 9 mm thick PLPB both E1 norms duly finished with 2mm pvc edge band. Storages shall have multiples

compartments. All the visible surface shall be sealed with 2mm edge banding. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC

Gold rated manufacturing facility & Green Guard Certification

The overall size of Chair shall be : Total height 1160 to 1260 +/-5 mm, Back Width 480 mm at Top and 420mm at bottom, Seat Width 500 +/-5 mm,

Seat Depth 460+/-5 mm and Seat height 460mm to 560 mm +/-5mm range. And over all chair width should be 615 +/-5mm and Overall chair depth

should be 640 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to

IS 3400. Seat, back & headrest shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM, Abrasion-100000 cycles over PU faom.

The chair shall be supplied with addtional Dynaflex mechanism Two Piece Back Construction with cushion foam at 55kg/m3 density having PP back.

REVOLVING CHAIR

Hardness of 25+3kgf at 50% deflection conforming to IS 3400. Back shall be provided With 260mm width, 160mm height and 50mm height

10 adjastable Headrest. The Chair should be provided with Synchro tilt Mechanism with three Multi lock features. The mechanism shall allow 360 Nos 4 25,370 1,01,480

BACK degree revolving feature along with height adjustablility. chair shall have seat sliding mechanism. One Way Adjustable Arms (Height) to be provied

with height adjustment button made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4

tested as per ANSI BIFMA standards. Aluminium die cast pedestal having length of prongs 310 mm with 50 mm height towards centre & 25 mm

height outside. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

Digitally signed by RAJ PAL

The overall size of Chair shall be : Total height 1050 to 1150 +/-5 mm, Back Width 480 mm at Top and 420mm at bottom, Seat Width 500 +/-5 mm,

Seat Depth 4t0+/-5 mm and Seat height 460mm to 560 mm +/-5mm range. And over all chair width should be 615 +/-5mm and Overall chair depth

should be 640 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to

IS 3400. Seat & back shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM, Abrasion- 100000 cycles over PU foam. No

flamming or progressive smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be

REVOLVING CHAIR used. The chair shall be supplied with addtional Dynaflex mechanism Two Piece Back Construction with cushion foam at 55kg/m3 density having PP

11 CUSHION SEAT & back. Hardness of 25+3kgf at 50% deflection conforming to IS 3400 The Chair should be provided with Synchro tilt Mechanism – with three Multi Nos 12 24,190 2,90,280

BACK lock features. The product shall be green guard certified. The mechanism shall allow 360 degree revolving feature along with height adjustablility.

chair shall have seat sliding mechanism. One Way Adjustable Arms (Height) to be provied with height adjustment button made of Delrin P 500. The

mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Aluminium die cast

pedestal having length of prongs 310 mm with 50 mm height towards centre & 25 mm height outside.The OEM shall have ISO 9001, ISO 14001,

BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

The overall size of the sofa shall be 2350 L x 790 D x 790 H. Sofa inner frame structure shall be made mainly from the combination of treated pine

wood of 20-25mm thick & neem based plywood sheets. The polyurethane (PU) foam of density 32 and 40 shall be used in seat constructions and

32 density foam used in back construction along with the webbing belts. Seat height should be 440mm (+/- 10mm) and seat depth shall be 525mm

(+/- 20mm). Each sofa individual set type shall consist of 4 metal legs of 200 mm height that shall be laser cut and press formed in 2mm thick CR

steel in complaince with IS 513: 2008. The legs shall be formed in V-shape with 125 x 125mm length flanges on its top face and moulded leg bush

12 3 SEATER SOFA shall be fixed at its bottom that shall support height adjustment of upto 10mm. To suppor thte sofa two nos wide flanges of the leg shall be be Nos 7 86,143 6,03,001

provided. Legs shall be pretreated through nano ceramic process that shall be environment friendly to enable powder coating to the thickness of

50-80 microns. The fabric used shall be 450-475 gms per meter having abrasion resistance of more than 50K rubs high quality polyester fabric.The

OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

The overall size of loung couch shall be total height 800mm, total width 700mm, total depth 860mm, seat depth shall be 550mm , seat width 590,

seat to back height 460mm.The chair seating height shall be 400mm from floor. There shall be extra padding between the armrest & the seat on

both sides for better comfort & polyfilled in arms & backrest. The polyurethane (PU) foam shall be used in Seat & back rest having 40 density and

32 density respectively. Seat to backrest angle should be ergonomically designed to offer the best seating comfort. Metal base shall be provided

13 LOUNGE CHAIR Nos 4 34,730 1,38,921

with swage tube. The chair shall be supplied with high quality fabric cusion at the back. chair shall be upholstered with micro fabric 100% polyster

180 GSM having abrasion > 50000 cycles fire rated fabric confirming to BS EN 1021. Chair Seat should be made up of foam pre moulded at 40

kg/m3 densityThe OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

CONFERENCE ROOM Nos - -

Conference table shall be size of 3600W X 1500D X 750H, Table Top: 25mm thick Pre laminate particle board E1 norms with 2mm PVC edge lipping

on all exposed edges. Two Long sides of the work surface shall be provided with reverse tapered edge design created by chamfering the board at 45

degree inside for 17mm length & keeping 8mm straight & then edges sealed with 2mm thick PVC Lipping on automatic machine. Leg: shall be made

up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on top, 45mm at bottom

and of 725mm length to get 750mm table height, it acts as vertical structural support member, connected by a horizontal cross beams

50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast 90deg – 02 way

connectors. The connector should have “V” / “U” shape tapered groove for sliding a Aluminium diecast slider nut. The slider nut shall be an

14 CONFERENCE Nos 1 1,09,888 1,09,888

ROOM Aluminium diecast part that has same taper as of “V” / “U” shape in the diecast connector. Wire Management: 450mm Aluminium Flip Up and

provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry cover. Cross Beam: Leg to Leg shall be connected using cross

beams made from 50x25x1.60mm (16g) Rectangular tube and to give floating look & to connect the table top with cross beams injection moulded

polycarbonate spacers should be used of dia 61mm x 42.50mm H insert moulded with M6x1P zinc blue plated bolt of 22mm L.Spacer height

including bolt should be 64.50mm. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green

Guard Certification

Digitally signed by RAJ PAL

Conference table shall be size of 4500W X 1200D X 750H, Table Top: 25mm thick Pre laminate particle board E1 norms with 2mm PVC edge lipping

on all exposed edges. Two Long sides of the work surface shall be provided with reverse tapered edge design created by chamfering the board at 45

degree inside for 17mm length & keeping 8mm straight & then edges sealed with 2mm thick PVC Lipping on automatic machine. Leg: shall be made

up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on top, 45mm at bottom

and of 725mm length to get 750mm table height, it acts as vertical structural support member, connected by a horizontal cross beams

50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium diecast 90deg – 02 way

connectors. The connector should have “V” / “U” shape tapered groove for sliding a Aluminium diecast slider nut. The slider nut shall be an

15 CONFERENCE Nos 2 1,09,597 2,19,194

ROOM Aluminium diecast part that has same taper as of “V” / “U” shape in the diecast connector. Wire Management: 450mm Aluminium Flip Up and

provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry cover. Cross Beam: Leg to Leg shall be connected using cross

beams made from 50x25x1.60mm (16g) Rectangular tube and to give floating look & to connect the table top with cross beams injection moulded

polycarbonate spacers should be used of dia 61mm x 42.50mm H insert moulded with M6x1P zinc blue plated bolt of 22mm L.Spacer height

including bolt should be 64.50mm. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green

Guard Certification

Conference Chair with Headrest : The overall size of Chair shall be height 1225 to 1345 +/-5 mm, Back Width 495 mm at Top and 385mm at

bottom, Seat Width 500 +/-5 mm, Seat Depth 390 to 450 +/-5 mm and Seat height 480mm to 600 mm +/-5mm range. And over all chair width

should be 690 +/-5mm and Overall chair depth should be 630 to 690 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density.

hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with Polyester & viscose- 380 GLM, Abrasion- > 45000

REVOLVING CHAIR cycles. The chair shall be supplied with Lenear Mesh at the back & shall be provided With 290mm width, 180mm height Headrest. Adjustable

16 WITH HEADREST Lumbar Support full length of size 325 mm , 105 mm height and 3mm thickness in contoured form can travel upto 30mm at the back .Four Way Nos 3 26,444 79,331

FOR CONFERENCE Adjustable Arms to be provied with height adjustment button made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7.

Nylon Base to be provied. Twin castors 60 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. Chair shall have sliding seat

mechanism. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

The overall size of Chair shall be height 1050 to 1170 +/-5 mm, Back Width 495 mm at Top and 385mm at bottom, Seat Width 500 +/-5 mm, Seat

Depth 390 to 450 +/-5 mm and Seat height 480mm to 600 mm +/-5mm range. And over all chair width should be 690 +/-5mm and Overall chair

depth should be 630 to 690 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection

conforming to IS 3400. Seat shall be upholstered with Polyester & viscose- 380 GLM, Abrasion- > 45000 cycles. The chair shall be supplied with

Lenear Mesh at the back rest. Adjustable Lumbar Support full length of size 325 mm , 105 mm height and 3mm thickness in contoured form can

REVOLVING CHAIR

17 travel upto 30mm at the back .The Chair should be provided with Synchro tilt Mechanism – with three Multi lock features. Four Way Adjustable Nos 34 25,854 8,79,029

Arms to be provied with height adjustment button made of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7. Nylon Base

to be provied. Twin castors 60 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. Chair shall have sliding seat mehcanism.

The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

COORDINATOR AND OFFICE ROOM Nos -

Digitally signed by RAJ PAL

Cabin Table in size of 1800W X 900D X 750H, Side unit of 900W X 450D X 750H and Back storage 1200L x 450D x 750H.Table Top: 25mm thick Pre

laminate particle board E1 norms with 2mm PVC edge lipping on all exposed edges. Two Long sides of the work surface shall be provided with

reverse tapered edge design created by chamfering the board at 45 degree inside for 17mm length & keeping 8mm straight & then edges sealed

with 2mm thick PVC Lipping on automatic machine. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7”

shape & oblong cross section of about 55mm on top, 45mm at bottom and of 725mm length to get 750mm table height, it acts as vertical

structural support member, connected by a horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical

legs through a high pressure Aluminium diecast 90deg – 02 way connectors. The connector should have “V” / “U” shape tapered groove for sliding

a Aluminium diecast slider nut. The slider nut shall be an Aluminium diecast part that has same taper as of “V” / “U” shape in the diecast connector.

Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht. Wire Management: 450mm Aluminium Flip Up and provision to

mount swicthes and sockets on PVC cable dump and Vertical wire entry cover. Cross Beam: Leg to Leg shall be connected using cross beams made

from 50x25x1.60mm (16g) Rectangular tube and to give floating look & to connect the table top with cross beams injection moulded polycarbonate

spacers should be used of dia 61mm x 42.50mm H insert moulded with M6x1P zinc blue plated bolt of 22mm L.Spacer height including bolt should

18 OFFICER ROOM Nos 1 1,09,130 1,09,130

be 64.50mm. Side Composite Storage (Openable Shutter +2D+1F) Top & Sides : 18mm Thk pre laminated particle board Back E1 norms: 9mm Thk

pre laminated particle board Shutters : 18mm Thk pre laminated particle board Handle. Handless Finger groove shall be created on top edge of

shutter doors by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with

minimum 2mm thick PVC lipping on automatic machine. Suitable number number lock shall be provided. Back Unit : The Overall Size shall be W

1200 x D 450 x H 750mm, Side & Front shall be made up of 18mm thick PLPB both E1 norms duly finished with 2mm pvc edge band. Back shall

madeup of 9 mm thick PLPB both E1 norms duly finished with 2mm pvc edge band. Storages shall have multiples compartments with center locks

and all other essential hardwares like hings, handles etc. All the visible surface shall be sealed with 2mm edge banding. The axle pin shall be rust

protected zinc passivated. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard

The Overall size of the main table shall be 1500 mm L x 750 mm D x 750 H & side storage shall be 900 x 450 x 750 H.The worktop shall be made up

of 25mm thick pre-laminated particle board of E1 norms. The modesty panel shall be of 18mm thick PLPB E1 norms. The sides of the worktop shall

be sealed with 2mm thick PVC Edge band. Strong & durable polycarbonate spacers should be provided between table top and understructure of

size of the spacer is 65 L x 25mm W x 15/20mm H. The understructure shall be made up of MS powder coated legs having enhanced look with 08

faces trapezoidal cross section size 42.50mm x 8mm x 43.50mm x 5.50mm x 17mm x 5.5mm x 43.50mm x 8mm and thickness of 1.6mm. Edges of

the leg should not have sharp edges. For safety of users a radius of R3.20 mm should be provided. Each leg comes with nut insert injection

moulded leg bush of same shape as of trapezoidal cross section and fixed with leveler for height adjustment upto 20mm. The vertical legs shall be

connected by horizontal beams with the help of aluminum die cast connector that joints the legs vertically and horizontally with pipe of cross

section 50 x 25 mm x 1.6 mm thickness. The die cast connector size shall be L shaped having angle of 10 degrees for vertical leg side. The Diecast

connector will have same shape as of Trapezoidal vertical leg at one side and another side matching to horizontal cross section 50x25. The cross

19 TABLE WITH SIDE Nos 3 65,030 1,95,089

STORAGE beams below the worktop shall be made of 40 mm x 20 mm ERW tubes & joined with the Legs frame through aluminium die cast connectors using

2 high tensile Allen bolts of M6x20mm L. Wire Management: 450mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable

dump and Vertical wire entry cover. The product shall be BIFMA Level 2 certified. Side storage shall be made up of 18mm thk pre laminated particle

board E1 norms, Back : 9mm Thk pre laminated particle board, one side having shutter storage with shelves and other side 3 drawer units. All

exposed area with 2mm thick PVC edge lipping The drawers front, filling & shutter top edges shall be provided with sleek finger groove handle less

design for a streamlined look. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered

towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine.The OEM shall have ISO 9001, ISO 14001,

BIFMA Level 2, IGBC Gold rated manufacturing facility & Green Guard Certification

Digitally signed by RAJ PAL

Revolving Chair with Headrest having seat slide & metal chrome pedestal. The overall size of Chair shall be : Width 490mm , Depth 520mm &

Height 1010 to 1110 mm. Seat Size shall be : width 490mm, Actual depth 520mm, Effective depth 450mm and height 475mm to 575mm. Width of

the back shall be 425mm at bottom & Lumbar level 440mm & min 480mm at shoulder level. Back height shall be 570mm as measured from seat

level. The chair shall be supplied with high quality Mesh at the back.. Back outer shall be injection moulded with Nylon GF30% material. The chair

shall be supplied with addtional Dynaflex mechanism Two Piece Back Construction for flexible movement towards right & left side of user.

Hardness of 25+3kgf at 50% deflection conforming to IS 3400Seat should be made up of foam pre moulded at 55 kg/m3 density & hardness of 25+

3kgf at 50% deflection conforming to IS 3400. Thickness of seat foam shall be 55 mm. Seat shall be upholstered with micro fabric 100% polyster 180

REVOLVING CHAIR

20 GSM having abrasion > 50000 cycles fire rated fabric confirming to BS EN 1021. Plywood used shall be 12mm thick 9 ply hot pressed. The Chair Nos 4 21,830 87,320

should be provided with Synchro tilt Mechanism allowing 360 degree revolving movement along with height adjustablility & tilt tension. The

product shall be green guard certified. Chair shall have seat sliding mechanism. The mechansim shall allow seat to back recline ratio of 2:5. The Gas

Lift used shall be class 4 tested as per ANSI BIFMA standards. Height adjustable Arms to be provied operated through button made of Delrin P 500.

Arm pad material shall be polyurethane with 2mm metal insert. Chair shall have metal Chrome base. 50mm dia twin castors with PA6 material to

be provided.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

Revolving Chair without Headrest having seat slide & metal chrome pedestal. The overall size of Chair shall be :width 490mm, Actual depth

520mm, Effective depth 450mm and height 475mm to 575mm. Width of the back shall be 425mm at bottom & Lumbar level 440mm & min 480mm

at shoulder level. Back height shall be 570mm as measured from seat level. The chair shall be supplied with high quality Mesh at the back.. Back

outer shall be injection moulded with Nylon GF30% material. The chair shall be supplied with addtional Dynaflex mechanism Two Piece Back

Construction for flexible movement towards right & left side of user. Seat should be made up of foam pre moulded at 55 kg/m3 density & hardness

of 25+ 3kgf at 50% deflection conforming to IS 3400. Thickness of seat foam shall be 55 mm. Seat shall be upholstered with micro fabric 100%

REVOLVING CHAIR

polyster 180 GSM having abrasion > 50000 cycles fire rated fabric confirming to BS EN 1021. Plywood used shall be 12mm thick 9 ply hot pressed.

HEADREST The Chair should be provided with Synchro tilt Mechanism allowing 360 degree revolving movement along with height adjustablility & tilt tension.

The product shall be green guard certified. chair shall have seat sliding mechanism. The mechansim shall allow seat to back recline ratio of 2:5. The

Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Height adjustable Arms to be provied operated through button made of Delrin P

500. Arm pad material shall be polyurethane with 2mm metal insert. Chair shall have metal Chrome base. 50mm dia twin castors with PA6 material

to be provided. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

Partition Non Sharing L- shaped workstationn : Overall Size of workstations shall be 1500-1500 x 600 x 1200 / 750. workstations of overall panel

thickness 65 mm (+/-5mm) and height of 1200mm (+/- 5mm). The worktop shall be made up of 25mm E1 norm PLPB with matching PVC edge band

2mm thick.Understructure shall be provided 18mm thick pre-laminate partical board with E1 norms with matching PVC edge band 2mm thick.The

partition frame shall only provided on the main side.The worktop shall be provided with 65mm gromet cut & shall be supported on CRCA bracket

with one side fixed on rectangular slot of frame vertical and other side to worksurface.The design of the privacy panel shall be made fully in an

aluminum frame work. The connectors will be made by Satin finished high pressure Zinc (Mazak 5) die cast caps confirming to IS:713.1981. The

screen will have aluminum top and side trims of 1.2 mm thick confirming to IS-733:2017.The partition frame shall be made up of nonferrous 6063

grade alum alloy confirming to DIN ISO-2768-1 & fabricated through weldless technology & fitted with pre moulded M8 levellers zinc passivated for

height adjustment. Frame shall have vertical & horizontal members, vertical channels have inbuilt groove with rectangular slots to fix cantilever /

PARTITION gable end brackets. Frame to frame shall be attached through male/ female hook mechanism pressure die casted parts made in zinc alloy Mazak5.

22 WORKSTATION L- Adequate ribs to be given in extrusion profiles having variable thicknesses of 1.10mm to 2.50mm for better durability. Frame to post shall be Nos 27 47,112 12,72,011

SHAPED attached by male/female hooks made up of 2mm thick CRCA material zinc passivated to 10-12 microns. Each frame shall be fitted with tiles, male &

female hooks, two end cap at top and bottom. Bottom caps shall be provided with leveller fixing arrangement. all caps shall be of aluminium ADC-

12 pressure die cast. top trip shall be flat aluminium confirming to DIN ISO-2768-1. The product shall be bifma level 2 certified. The data & power

cables provision to be given at different levels. skirting raceways shall be designed for snap fitting for data cables and for power cables raceway

below worktop shall be provided. Tiles of overall thickness 6mm thickness constructed out of MDF E-1 norms upholstered with fabric or Laminated

tile should be slide to the grooves provided in aluminium frame vertically, two tiles on either side of the frame to complete the assembly. The OEM

shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

Digitally signed by RAJ PAL

Partition Sharing L- shaped workstation : Overall Size of workstations shall be 1500-1500 x 600 x 1200 / 750. workstations of overall panel thickness

65 mm (+/-5mm) and height of 1200mm (+/- 5mm). The worktop shall be made up of 25mm E1 norm PLPB with matching PVC edge band 2mm

thick.Understructure shall be provided 18mm thick pre-laminate partical board with E1 norms with matching PVC edge band 2mm thick.The

partition frame shall only provided on the main side.The worktop shall be provided with 65mm gromet cut & shall be supported on CRCA bracket

with one side fixed on rectangular slot of frame vertical and other side to worksurface.The design of the privacy panel shall be made fully in an

aluminum frame work.The connectors will be made by Satin finished high pressure Zinc (Mazak 5) die cast caps confirming to IS:713.1981. The

screen will have aluminum top and side trims of 1.2 mm thick confirming to IS-733:2017.The partition frame shall be made up of nonferrous 6063

grade alum alloy confirming to DIN ISO-2768-1 & fabricated through weldless technology & fitted with pre moulded M8 levellers zinc passivated for

height adjustment. Frame shall have vertical & horizontal members, vertical channels have inbuilt groove with rectangular slots to fix cantilever /

PARTITION gable end brackets. Frame to frame shall be attached through male/ female hook mechanism pressure die casted parts made in zinc alloy Mazak5.

23 WORKSTATION L Adequate ribs to be given in extrusion profiles having variable thicknesses of 1.10mm to 2.50mm for better durability. The product shall be bifma Nos 32 42,613 13,63,608

SHAPED SHARING level 2 certified. Frame to post shall be attached by male/female hooks made up of 2mm thick CRCA material zinc passivated to 10-12 microns.

Each frame shall be fitted with tiles, male & female hooks, two end cap at top and bottom. Bottom caps shall be provided with leveller fixing

arrangement. all caps shall be of aluminium ADC-12 pressure die cast. top trip shall be flat aluminium confirming to DIN ISO-2768-1. The data &

power cables provision to be given at different levels. skirting raceways shall be designed for snap fitting for data cables and for power cables

raceway below worktop shall be provided. Tiles of overall thickness 6mm thickness constructed out of MDF E-1 norms upholstered with fabric or

Laminated tile should be slide to the grooves provided in aluminium frame vertically, two tiles on either side of the frame to complete the

assembly. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

Rectangular shaped workstation : Overall Size of workstations shall be 1350 x 600 x 1200 / 750. workstations of overall panel thickness 65 mm (+/-

5mm) and height of 1200mm (+/- 5mm). The worktop shall be made up of 25mm E1 norm PLPB with matching PVC edge band 2mm

thick.Understructure shall be provided 18mm thick pre-laminate partical board with E1 norms with matching PVC edge band 2mm thick.The

partition frame shall only provided on the main side.The worktop shall be provided with 65mm gromet cut & shall be supported on CRCA bracket

with one side fixed on rectangular slot of frame vertical and other side to worksurface.The design of the privacy panel shall be made fully in an

aluminum frame work.The connectors will be made by Satin finished high pressure Zinc (Mazak 5) die cast caps confirming to IS:713.1981. The

screen will have aluminum top and side trims of 1.2 mm thick confirming to IS-733:2017.The partition frame shall be made up of nonferrous 6063

grade alum alloy confirming to DIN ISO-2768-1 & fabricated through weldless technology & fitted with pre moulded M8 levellers zinc passivated for

height adjustment. Frame shall have vertical & horizontal members, vertical channels have inbuilt groove with rectangular slots to fix cantilever /

gable end brackets. Frame to frame shall be attached through male/ female hook mechanism pressure die casted parts made in zinc alloy Mazak5.

24 Adequate ribs to be given in extrusion profiles having variable thicknesses of 1.10mm to 2.50mm for better durability. The product shall be bifma Nos 7 32,273 2,25,911

1350 L level certified. Frame to post shall be attached by male/female hooks made up of 2mm thick CRCA material zinc passivated to 10-12 microns. Each

frame shall be fitted with tiles, male & female hooks, two end cap at top and bottom. Bottom caps shall be provided with leveller fixing

arrangement. all caps shall be of aluminium ADC-12 pressure die cast. top trip shall be flat aluminium confirming to DIN ISO-2768-1. The data &

power cables provision to be given at different levels. skirting raceways shall be designed for snap fitting for data cables and for power cables

raceway below worktop shall be provided. Tiles of overall thickness 6mm thickness constructed out of MDF E-1 norms upholstered with fabric or

Laminated tile should be slide to the grooves provided in aluminium frame vertically, two tiles on either side of the frame to complete the

assembly.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

Digitally signed by RAJ PAL

Rectangular shaped workstation : Overall Size of workstations shall be 1200 x 600 x 1200 / 750. workstations of overall panel thickness 65 mm (+/-

5mm) and height of 1200mm (+/- 5mm). The worktop shall be made up of 25mm E1 norm PLPB with matching PVC edge band 2mm

thick.Understructure shall be provided 18mm thick pre-laminate partical board with E1 norms with matching PVC edge band 2mm thick.The

partition frame shall only provided on the main side.The worktop shall be provided with 65mm gromet cut & shall be supported on CRCA bracket

with one side fixed on rectangular slot of frame vertical and other side to worksurface.The design of the privacy panel shall be made fully in an

aluminum frame work.The connectors will be made by Satin finished high pressure Zinc (Mazak 5) die cast caps confirming to IS:713.1981. The

screen will have aluminum top and side trims of 1.2 mm thick confirming to IS-733:2017.The partition frame shall be made up of nonferrous 6063

grade alum alloy confirming to DIN ISO-2768-1 & fabricated through weldless technology & fitted with pre moulded M8 levellers zinc passivated for

height adjustment. Frame shall have vertical & horizontal members, vertical channels have inbuilt groove with rectangular slots to fix cantilever /

gable end brackets. Frame to frame shall be attached through male/ female hook mechanism pressure die casted parts made in zinc alloy Mazak5.

25 Adequate ribs to be given in extrusion profiles having variable thicknesses of 1.10mm to 2.50mm for better durability. Frame to post shall be Nos 12 28,320 3,39,840

1200 L attached by male/female hooks made up of 2mm thick CRCA material zinc passivated to 10-12 microns. The product shall be bifma level 2 certified.

Each frame shall be fitted with tiles, male & female hooks, two end cap at top and bottom. Bottom caps shall be provided with leveller fixing

arrangement. all caps shall be of aluminium ADC-12 pressure die cast. top trip shall be flat aluminium confirming to DIN ISO-2768-1. The data &

power cables provision to be given at different levels. skirting raceways shall be designed for snap fitting for data cables and for power cables

raceway below worktop shall be provided. Tiles of overall thickness 6mm thickness constructed out of MDF E-1 norms upholstered with fabric or

Laminated tile should be slide to the grooves provided in aluminium frame vertically, two tiles on either side of the frame to complete the

assembly.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

The Overall size of the main table shall be 1500 mm L x 600 mm D x 750 H .The worktop shall be made up of 25mm thick pre-laminated particle

board of E1 norms. The modesty panel shall be of 18mm thick PLPB E1 norms. The sides of the worktop shall be sealed with 2mm thick PVC Edge

band. Strong & durable polycarbonate spacers should be provided between table top and understructure of size of the spacer is 65 L x 25mm W x

15/20mm H. The understructure shall be made up of MS powder coated legs having enhanced look with 08 faces trapezoidal cross section size

42.50mm x 8mm x 43.50mm x 5.50mm x 17mm x 5.5mm x 43.50mm x 8mm and thickness of 1.6mm. Edges of the leg should not have sharp edges.

For safety of users a radius of R3.20 mm should be provided. Each leg comes with nut insert injection moulded leg bush of same shape as of

trapezoidal cross section and fixed with leveler for height adjustment upto 20mm. The vertical legs shall be connected by horizontal beams with

26 the help of aluminum die cast connector that joints the legs vertically and horizontally with pipe of cross section 50 x 25 mm x 1.6 mm thickness. Nos 4 29,978 1,19,912

The die cast connector size shall be L shaped having angle of 10 degrees for vertical leg side. The Diecast connector will have same shape as of

Trapezoidal vertical leg at one side and another side matching to horizontal cross section 50x25. The cross beams below the worktop shall be made

of 40 mm x 20 mm ERW tubes & joined with the Legs frame through aluminium die cast connectors using 2 high tensile Allen bolts of M6x20mm L.

Wire Management: 300mm Aluminium Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry cover.The

OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

Storage Drawer Pedestal: It shall be of size of 400 x 450 x 600 (WDH) mm made up of 18mm thick Pre-laminate particle board as per E1 norms

and its edges duly sealed with 2mm PVC Lipping on automatic machine at visible sides. Drawer front & sides shall be made up of 18mm, back 9

mm thick pre laminated particle board of E1 grade with visible edges sealed with 2mm PVC edge band. The drawer top surface shall be provided

27 with finger groove handle-less design. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm Nos 83 11,328 9,40,224

DRAWER PEDESTAL

tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be provided.

The axle pin shall be rust protected zinc passivated.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated

manufacturing facility & Green Guard Certification

The overall size of Chair shall be width 600 +/-5mm, depth 640 +/-5mm. Total height shall be 995 to 1095 +/-5 mm, Back Width 425 mm at Top and

500mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 460+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat shall be made up of

foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered with micro fabric

100% polyster 180 GSM abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be supplied

with cushion at the back. The back frame shall be made up of Injection molded PPGF 20% in light grey shade, armest support also in light grey

WORKSTATION shade. Adjustable Lumbar Support made up of PU having size 365 mm x 110 mm x 25mm thick shall be provided for better comfort. The Chair

REVOLVING CHAIR should be provided with Self Calibrating Multilock Mechanism (Bio Snchyro mechansim) that should adjust the tension of the back sensing weight

CUSHIONED SEAT of the user. The product shall be green guard certified. The mechanism shall allow 360 degree revolving feature along with height adjustablility.

& BACK The Chair shall have seat slide mechanism. One Way Adjustable Arms (Height) to be provied with height adjustment button made of Delrin P 500.

The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Metal base

shall be provided of light grey color matching the chair back & armrest.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold

rated manufacturing facility & Green Guard Certification

Digitally signed by RAJ PAL

Training table shall be size of 3000W X 900D X 750H, Table Top: 25mm thick Pre laminate particle board E1 norms with 2mm PVC edge lipping on

all exposed edges. Leg: shall be made up of high pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of

about 55mm on top, 45mm at bottom and of 725mm length to get 750mm table height, it acts as vertical structural support member, connected by

a horizontal cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure Aluminium

diecast 90deg – 02 way connectors. The connector should have “V” / “U” shape tapered groove for sliding a Aluminium diecast slider nut. The slider

VIDEO WALL nut shall be an Aluminium diecast part that has same taper as of “V” / “U” shape in the diecast connector. Wire Management: 450mm Aluminium

ROOMTABLE Flip Up and provision to mount swicthes and sockets on PVC cable dump and Vertical wire entry cover. Cross Beam: Leg to Leg shall be connected

using cross beams made from 50x25x1.60mm (16g) Rectangular tube and to give floating look & to connect the table top with cross beams

injection moulded polycarbonate spacers should be used of dia 61mm x 42.50mm H insert moulded with M6x1P zinc blue plated bolt of 22mm

L.Spacer height including bolt should be 64.50mm. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing

facility & Green Guard Certification

The overall size of Chair shall be height 915 to 1015 +/-5 mm, Back Width 415 mm at Top and 450mm at bottom, Seat Width 480 +/-5 mm, Seat

Depth 440+/-5 mm and Seat height 460mm to 560 mm +/-5mm range. over all chair width should be 560 +/-5mm and Overall chair depth should

be 670 +/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400.

Seat shall be upholstered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within one

hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The back frame shall be made up of PPGF

and the injection molded in black color, armrest also in black color. The chair shall be supplied with Mesh Back rest. The Chair should be provided

VIDEO WALL ROOM

30 with center tilt two position lock Mechanism. The product shall be green guard certified. The mechanism shall allow 360 degree revolving feature Nos 20 11,771 2,35,410

REVOLVING CHAIR

along with height adjustablility. Fixed arms connected to seat and back in the same contour. The mechansim shall possess seat to back recline ratio

of 1:1. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base in grey color to be provied. Twin castors 50 mm dia with

PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. the axle pin shall be rust protected zinc passivated. The base shall be made up of

nylon glass filled black color. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard

RECEPTION AND CORIDOR AREA Nos - -

Overall size of rack shall be size of W1800 x D 435 x H 1775 : The complete frame work shall of modular in construction and shall be made of

aluminium extrusions and aluminium diecast connectors. All the aluminium extrusions shall be of size 20x20mmx2mm wall thickness.The product

shall be elevated by 75mm from floor and every leg shall be fitted with ABS injection moulded leg bush. The aluminium connectors and extrusions

shall come with powder coating finshall h at 40-60 microns. The aluminium extrusions with 18mm shall be used to offer 18mm thk prelam partical

31 DISPLAY UNIT board shelves, so that the top surface of prelaminated particle board will be in same line with extrusion surface. All the connectors shall be Nos 2 97,507 1,95,014

pressure diecast connectors in ADC-12 material confirming to ASTM E 1251-2011, shall 7658-1990 & shall 11035 – 1190 for chemical composition

and shall 1608 – 2005 for UTS & Ys. All connectors come with M5 threads to fix M5x0.8P CSK screw.The OEM shall have ISO 9001, ISO 14001,

BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

Overall size of table shall be of size 1200L x 800D x 1050 H (mm). The worksurface of the table shall be made up of 18mm thick Pre-laminate

hydroshield top and its edges shall be polished. The understructure will feature vertical legs made of 50 mm x 50 mm x 1.6 mm steel tubing, while

the horizontal frame will be constructed from 50 mm x 25 mm x 1.6 mm steel. A cross beam, sized 40 mm x 20 mm x 1.6 mm across the length of

CAFETERIA HIGH the table, will be installed beneath the tabletop to provide additional support. This cross beam shall be connected on both sides with pressure die

TABLE cast connectors of 50 mm height, 70 mm width & 35 mm depth designed in a shape acting as spacer between horizontal frame & tabletop. Legs

below shall be connected with each other through 40 x 20 size crca pipes to form foot rest for users.Understructure shall powder coated upto 40 to

60microns.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

Overall size of table shall be of size 1800L x 800D x 1050 H (mm). The worksurface of the table shall be made up of 18mm thick Pre-laminate

hydroshield top and its edges shall be polished. The understructure will feature vertical legs made of 50 mm x 50 mm x 1.6 mm steel tubing, while

the horizontal frame will be constructed from 50 mm x 25 mm x 1.6 mm steel. A cross beam, sized 40 mm x 20 mm x 1.6 mm across the length of

CAFETERIA HIGH the table, will be installed beneath the tabletop to provide additional support. This cross beam shall be connected on both sides with pressure die

TABLE cast connectors of 50 mm height, 70 mm width & 35 mm depth designed in a shape acting as spacer between horizontal frame & tabletop. Legs

below shall be connected with each other through 40 x 20 size crca pipes to form foot rest for users.Understructure shall powder coated upto 40 to

60microns.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

Digitally signed by RAJ PAL

The overall size of Chair shall be Total height 1100 +/-3 mm, Over all chair width should be 490 +/-5mm and Overall chair depth should be 550 +/-

5mm. Back Width 360mm at Top and 440mm at bottom, Seat Width 420 +/-3 mm, Seat Depth 425+/-3 mm and Seat height 770mm +/-5mm . Seat

and back shell should made by injuction moulding process with plastic material of PPGF20%. Seat shall be PU form and shall be uplhostered with

micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used.The Chair

CAFETERIA HIGH understructure should be provided with 12 mm thickness MS rod loop legs, front legs connected with each other with rod to form foot rest & back

CHAIR legs also connected with each other with rod conforming to IS – 7887. Injuction moulded Polycarbonate Leg shoes shall assembled to

understructure. seat assembled shall be with silicon bushes to ensure stratch free when chairs stached. Understructure shall powder coated upto

40 to 60microns.The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

2 Bay Compactor : Construction:- All components like front mechanism box, shelvings, clading sheet etc. shall be made out of superior quality of

CRCA sheets. It shall consist of storage units of 450mm deep, movable and bolted to undercarriage that rolls on the channels firmly embedded to

the ground. The size of storage body shall be: width 915 mm, depth 450 mm and a height of 1980 mm (overall variance +/- 50 mm) including the

storage body height with undercarriage The main body should be rigid knock down construction is made of out of Side /tack/top Panels made up of

minimum 0.8mm thick CRCA steel. Each body block should consists of one single fixed unit, one double mobile one single mobile unit and add on

as per site conditions and each unit should have 5 loading levels formed by 4 nos of adjustable shelves. The storage body units shall be bolted to

the undercarriage. The shelf panel of storage unit should be made of 0.8mm thick CRCA steel having UDL of 40-50 Kg per shelf. The shelves should

be mounted on support brackets & its level should be adjustable. There should be 4 adjustable shelves per body giving 5 loading levels. The under

carriage should be made with HR sheet min 2.5 min suitably fabricated using welding to take the loads. The MSU should be running on a guidetrack

of size 28 mm M.S. round with necessary bracing/channel and base plate. Rails should be 25 mm square bright bar. The bodies including shelves

36 2 BAY COMPACTOR and undercarriages should be given 7 tank antirust surface treatments and finished with powder coating using epoxy polyester powder of 50- Nos 20 56,814 11,36,281

60microns. A centralized locking arrangement should be provided through the locking stiffener mounted onto back of single last unit so that it gets

locked on channels when all the units are brought together. All the' units should be provided with chrome plated handles. All the MSU should be

provided with the features such as mechanical drive with a handle for mechanically assisted drive mechanism consisting of a series of sprocket and

chain mechanism for smooth movement of the compactor with minimum effort. It should be fitted with safety guard which is to be engaged when

entering the common aisle. This should prevent from operating system when an individual is in the working aisle. The guide track should be

provided with an end stopper to avoid derailment of the units. It should be provided with the label holders. The OEM shall have ISO 9001, ISO

14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

The overall size shall be 1500 x 450 x 1200 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle board E1 norms and Back shall

be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made up of 18 mm thick pre laminated

particle board. 4 Shutters to be provied for compartment. Planter Box Shall height of 150mm to keep the planter pot. Edge: All exposed shall be

sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-less design for a streamlined look.

37 STORAGE FOR Nos 7 41,300 2,89,100

AISLE Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside @ 45 degree &

then sealed with minimum 2mm thick PVC lipping on automatic machine. Number Lock faciltity should be provided for safe storage of documents.

The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

The overall size shall be 1050 x 450 x 1200 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle board E1 norms and Back shall

be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made up of 18 mm thick pre laminated

particle board. 3 Shutters to be provied for compartment. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top

shall be provided with finger groove handle-less design for a streamlined look. Finger groove shall be created by providing a reverse tapered profile

38 STORAGE FOR Nos 1 37,760 37,760

AISLE edge of 6mm straight surface & 12 mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic

machine. Number Lock faciltity should be provided for safe storage of documents. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM,

IGBC Gold rated manufacturing facility & Green Guard Certification

The overall size shall be 1200 x 450 x 1200 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle board E1 norms and Back shall

be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made up of 18 mm thick pre laminated

particle board. Shutters to be provied for compartment. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top

LOW HEIGHT shall be provided with finger groove handle-less design for a streamlined look. Finger groove shall be created by providing a reverse tapered profile

STORAGE edge of 6mm straight surface & 12 mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic

machine.Number Lock faciltity should be provided for safe storage of documents. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM,

IGBC Gold rated manufacturing facility & Green Guard Certification

Digitally signed by RAJ PAL

The overall size shall be 900 x 450 x 1200 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle board E1 norms and Back shall be

made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made up of 18 mm thick pre laminated particle

board. Shutters to be provied for compartment. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be

LOW HEIGHT provided with finger groove handle-less design for a streamlined look. Finger groove shall be created by providing a reverse tapered profile edge of

STORAGE 6mm straight surface & 12 mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic

machine.Number Lock faciltity should be provided for safe storage of documents. The OEM shall have ISO 9001, ISO 14001, BIFMA Level 2, IDM,

IGBC Gold rated manufacturing facility & Green Guard Certification

The overall size shall be 1050 x 450 x 750 (WDH) mm. Central part shall have two drawers at top & one filling below and shutter storage at either

ends Top shall be made up of 18 mm thick pre laminated particle board E1 norms, Back shall be made up of 9 mm thick pre laminated particle

board with 2mm PVC edge lipping, Shutters & drawer front shall be made up of 18 mm thick pre laminated particle board. Edge: All exposed shall

be sealed with 2mm thick PVC edge lipping. The hinged doors top and drawer top shall be provided with finger groove handle-less design for a

41 BACK STORAGE Nos 1 21,727 21,727

streamlined look. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards

inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be provided. The OEM shall

have ISO 9001, ISO 14001, BIFMA Level 2, IDM, IGBC Gold rated manufacturing facility & Green Guard Certification

Total Amount 13936595

Total Amount 13936595

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: LANDSCAPE

S NO DSR/MR Image Description Unit Qty Rate DSR Amount Non DSR Amount

MossWall - Customised

“Wall Panel - Plain; Supply, Testing and

Commissioning of maintenance free Moss Wall of

size 600mm x 400mm panel. The plants shall be

for indoor use only and require no direct sunlight

or watering/ spraying of water. It is certified for

1 MR sound absobtion rate; fire resistance and has a Sqm 40 47,404.00 18,96,160.00

very hostile environment for reproduction of

insects. Please ensure 40% humidity at all times.

It does not require any trimming as well, hence a

maintenance free product".

Make: Verde Profilo, Italy

Supply of full soil fill conical shaped planters of

specified volume and dimensions in stone finish

or equivalent. planters to be indigenously made by

rotational moulding, with homogeneous

recyclable, industrial grade polymer-resin mix, and

textured surface. planters should have an

integrated water outlet hole & plug, single layered

peel-proof construction, light weight, rust proof, uv

MR stabilized, anti-frost feature without any joints,

and easy to clean. planter supplier must give 1

year warranty against any fading or cracking for

both indoor and outdoor use. green plant and

laying is extra. potting instructions as per company

Supply of double layered translucent backlit

cylinderical shaped - hand carfted pattern

planters of volume 40 ltr; approx. dimension

40(h)x18.5(d) in granite/ stone/ solid finish or

equivalent. planters to be indigenously made by

rotational moulding, with homogeneous 100%

3 MR recyclable, industrial grade polymer-resin mix, with Nos 5 25,000.00 1,25,000.00

textured surface and stone match finishes.

planters to have concealed shock resistant back

lighting system with secured supply wire and an

integrated water outlet hole & plug, peel proof

construction, asbestos free, light in weight, without

any joints, rust proof, uv stabilized, anti-frost

Plantation: Supply and installation of Natural Plant

with sand, fertilizer etc.

46 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - ARTWORK

S NO DESCRIPTION QTY UNIT RATE

The objective is to create artworks that symbolize the heritage, values, and mission of EdCIL. The artwork should reflect the

1 MR PAINTING integrity, precision, and responsibility associated with the corporation's role in security printing and minting, while also 15 sft 6,962.00 1,04,430.00

representing India's rich cultural heritage.

Supply and fixing a series of Indian-themed paintings that represent the cultural and historical heritage of India.The artwork

should highlight EdCIL’s values while representing India’s rich folk traditions, such as Madhubani, Warli, Gond, Kalamkari, and

INDIAN Pattachitra, among others.The paintings should be made using high-quality materials such as oil, acrylic, watercolor, or mixed

PAINTING media on canvas or other suitable surfaces. synthetic frame will be used. Paints and materials used should ensure long-lasting

durability, especially in corporate environments.

Framing should complement the office’s aesthetics and provide protection for the artwork.

Supply and fixing a series of landscape artworks that celebrate various aspects of nature, such as:

Scenic views of forests, mountains, rivers, and fields.

3 MR Depictions of seasonal changes, showcasing the beauty of nature throughout the year. 15 sft 3,776.00 56,640.00

Abstract representations of natural elements that evoke feelings of calmness and inspiration.Gallery wrapped/margin frame

Abstract designs filled with bold colors and dynamic patterns that energize the space.

Depictions of nature and local culture, using colors that reflect the diversity and richness of Indian heritage.Interactive or

4 MR GRAFFITTI engaging artwork that encourages social interaction, such as mural designs that invite participation or storytelling. reclaimed 15 sft 2,360.00 35,400.00

materials, or 3D elements to add depth and texture.

Incorporate elements that celebrate food, health, and well-being, creating a positive dining experience.

47 Digitally signed by RAJ PAL