Construction of IBT tank with Shed at Barauni Dairy.

NIT No- :- DRMU:PROJECT: …........ Date: ….............

Name of Work/Bill of Quantity for :- Construction of IBT Tank with Shed at Barauni Dairy.

Estimated cost of Tender (in Rs) :- 10,08,314.00

Earnest Money (in Rs.) :- 20200

Time of Completion (in months) :- 4 (Four) Months

Cost of BOQ (in Rs.) 5000

Bid Processing Fee of Beltron (in Rs.) Non-Refundable and to be paid only through e-Payment mode i.e. Internet payment gateway (Master or Visa Card)/Internet Banking/NEFT or RTGS :- As per eproc2 website

FINANCIAL BID FORM

TO BE FILLED IN BY BIDDER

1 Estimated cost :- Rs.- 10,08,314.00

2 Cost of Govt. Material ( Not Applicable as no materials will be provided by DRMU,Barauni) :- Rs.-

3 Rate quoted more than 10% Below the estimated rate will be rejected.

4 Name of the Contractor :-

5 Address of the Contractor :-

6 (Rate to be Quoted ) Percent Above or Below or At the BOQ rate in figures :-

% above/below/ at BOQ

Instruction to Bidder for quoting rate

a. If a bidder is willing to execute the work, say at the BOQ Rate, he/ she must fill in "0" in front of 'in figures' and "ZERO" in front of 'in words' and "AT THE BOQ Rate" in front of 'Percent Above or Below or At the BOQ Rate'.

b. If a bidder is willing to execute the work, say at 2.45 percent "Below the BOQ Rate", he/she must fill in "2.45" in front of 'in figures' and "TWO DECIMAL FOUR FIVE" in front of 'in words' and "BELOW " in front of 'Percent Above or Below or At the BOQ Rate'.

c. If a bidder is willing to execute the work, say at 2.45 percent "Above the BOQ Rate", he/she must fill in "2.45" in front of 'in figures' and "TWO DECIMAL FOUR FIVE" in front of 'in words' and "ABOVE " in front of 'Percent Above or Below or At the BOQ Rate'.

BOQ of Construction of IBT Tank with Shed at Barauni Dairy.

Sl. No Reference Description of work Unit Qty Rate Amount

1 BCD-2022,Page no. 98, item no. 2.1.1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50m and lift upto 1.5 m disposed soil to be leveled and neatly dressed :- All Kinds of soil 100sqm 0.66 4611.7

RCD-2025, Vol-1 Item No.-6.01 ref 601, Page No.-289 Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10Mpa at 7days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.

For Foundation of Tank cum 13.25 2878.2

BCD-2022,Page no. 106, item no. 4.13 Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg. per square metre on damp proof course after cleaning the surface with brushe sand finally with a piece of cloth lightly soaked in kerosene oil. Sqm 256.954 143.7

BCD-2022, Item No.26.7, Page No.-333 Providing and fixing 50mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C578-08b- type VI, having thermal conductivity of 0.0289W/m K as per ASTM C 578 (measured as per IS3346), compressive strength of >350kPa listed as per ASTM D 1621, density of 34-36kg/m³ as per ASTM D 1622, water absorptions 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardent property as per DIN 4102, Part 1of class B2 and as per ASTM E 84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the direction of Engineer-in Charge. Sqm 256.954 813.9

BCD-2022, Item No.5.1.2, Page No.-109 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All work upto plinth level. 1:1:5:3 (1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) cum 7.31 4688.3

BCD SOR 2022,page no.112/item no. 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7B Thermo-Mechanically Treated bars TMT Fe-500- 10 mm kg 511.7 92.6

BCD SOR 2022, page no.120/ item no. 6.1.12/1+6.3A Brickwork with bricks of class designation 100A in superstructure above plinth level upto floor V - Cement mortar 1 .:4 (1 cement: 4 coarse sand ) cum 12.576

BCD SOR 2022, page no.110, item no. 5.9 Centring and shuttering including strutting, propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns etc. for mass concrete. Sqm 6.6 211.6

BCD SOR 2022, page no.208, item no. 13.11.2 Cement plaster in course sand -12 mm cement plaster of mix: 1:4(1 cement :4 coarse sand)

Outer Portion Sqm 83.844 152.9

BCD SOR 2022, page no.210, item no. 13.40A Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. sqm 127.9

BCD SOR 2022, page no.210, item no. 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Total Area for Painting sqm 137

BCD SOR 2022,page no.216/item no.13.93.1 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

10.32.2 Ingratings, frames,guardbar, ladders, railings,brackts.gates& similar works kg 528.53 114.6

BCD SOR 2022,page no.216/item no.13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work sqm 13.59 84.5

Prefabrication Items

14 BCD SOR 2022,page no.176/item no.10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes kg 1573.66 123.9

15 BCD SOR 2022,page no.201/item no.12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm 61.2 625.1

16 BCD SOR 2022,page no.201/item no.12.51 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns using self drilling/ self tapping screws complete :

12.51.1 Ridges plain (500 - 600mm) sqm 4.5 396.8

12.51.6 Gutter (600 mm over all girth) m 10.8 898.7

Carriage of Material

Approved Rate Carriage of Bricks 1000 Nos 16.82 1053.35

Approved Rate Carriage of Stone aggregate Cum 25.27 4694.03

Approved Rate Carriage of Cement Tonne 9.101 518.09

Approved Rate Carriage of sand Cum 15.039 1488.92

Approved Rate Carriage of Local sand Cum 322.82

Approved Rate Carriage of Steel Tonne 2.09 518.09

Difference Cost of Material

Bricks cum 359.05

Cement cum 109.29

Total Cost including GST

Total Cost of Project

( Ten lakh eight thousand three hundred fourteen rupees only. )

TECHNICAL BID SHEET

Name of Department : Desratna Dr. Rajendra Prasad Dugdh Utpatak Sahkari Sangh Ltd., Barauni Dairy, Barauni

NIT No : DRMU:PROJECT: …........ Date: ….......

Bill of Quantity for/Name of Work : Construction of IBT Tank with Shed at Barauni Dairy.

Time of Completion (in months) : 4 (Four Months)

Sl No. Details To be Filled in color cells by Contractor

1 Name of the Contractor

2 Address of the Contractor

3 Registration No. with the Name of Department

4 Bid Processing Fee (A) As prescribed in Tender document, (Non-Refundable) and to be paid only through e-Payment modes i.e. Internet Payment Gateway (Credit/Debit Card) /Internet Banking/NEFT or RTGS

Bid Processing Fee Amount - As per eproc2 website

5 Form Fee (Bid Document Cost) (A As prescribed in Tender document and to be paid only through e-Payment modes i.e. Internet Payment Gateway (Credit/Debit Card) /Internet Banking/NEFT or RTGS (Please mention details)

Form Fee Amount - Rs. 5,000.00 Form Fee Amount - Rs.

6 Earnest Money (A) As prescribed in Tender document, in favor of Deshratna Dr. Rajendra Prasad Dugdh Utpadak Sahkari Sangh Limited Payable at Barauni (in shape of Bank Guarantee/ 5 Years NSC/ 5 Years T.D) (Please mention details) No./ Date

Bid Security Amount - Rs. 20,200.00 Bid Security Amount - Rs.

A. QUALIFYING CRITERIA (Self attested copy of Certificates to be uploaded wherever required.)

6 GST Registration No.

7 Labour License

9 Service Tax Registration certificate.

10 Affidavit regarding any litigation, debarred or blacklisted or history of rescinding work, no near relatives in the concerned division and the informations furnished in the bidding document is correct to be uploaded

11 Income tax return of last Three Years( to be uploaded)

12 Annual Financial Turn over of last 05 (Five) Years [Atleast annual turn over of 03 years should be audited by Chartered Accountant & shall be uploaded]

13 Is the Contractor registered with COMFED or Not?

14 If YES, please furnish your registration No and category of registration. * Contractors registrered with COMFED need not submit their experience certificates(mentioned in Sr. No. 16) for work of estimated cost upto 50 Lakh

15 Experience of work of similar nature (Certified by concerned competent authority/ payment authority) as per eligibility criteria of Tender Document)

16 Timely completion certificate of completed works (Certified by the concerned competent authority /payment authority) ( only of works which are uploaded in sr.no 15)

17 Details of Engineering setup

18 a Details of tools & Plants :- (i) Automatic Batching Plant with all other necessary equipments. (ii) Concrete Mixer with weighing facility. (iii) Steel centering and shuttering 2000 sqft ( minimum) (iv) Vibrator & water tanker (v) Any other (LIST TO BE UPLOADED)

18 b Quality control equipments:- (i) AIV, (ii) Gradation equipment, (iii) Compression testing machine and (iv) Slump test equipment (v) any other (LIST TO BE UPLOADED)