SPECIAL REPAIR TO SINGLE OFFICERS ACCN AT 19 Wing AF UNDER GE AF BORJHAR

Amount

Taking down shutters of any description exc 1.00 Sqm each but n.exc. 2 Sqm, complete all as specified as directed

Taking down cement plaster of any description and in any position including raking out joints, hacking for key scrubbing down with water etc and removing of debris from site, complete all as directed.

Demolition of cement concrete in ground floors & paving n.exc 15cm thickness (below or above ground level) including floor tiles of any description, complete all as directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish of the premises complete all as specified and directed.

Demolition of brick work build in cement mortar including all quoins, arches, pillars, etc. but exceeding ashlar facing and pre-cast concrete articles, complete all as specified and directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes supplying and fixing in opening as per specification and drawing complete all as specfied and directed by Engr-In-Charge .

M & L for 100 mm thick PCC 1:2:4 type D2 (using 40 mm graded stone aggregate) as in sub base of floor, surface finished fair and even,complete all as specified and as directed.

M & L non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exe.0.06 sqm but n.exe.0.11 sqm, in floor set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M & L for 15mm thick screed bed or bedding layer of cement mortar (1:4) to receive tiles, complete all as specified and directed.

M & L for glazed ceramic coloured tiles 300x200X 6 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile, complete all as specified and directed.

M & L for 10 mm thick coloured vitrified ceramic tiles of size as in floor, exc 0.36 Sqm and n.exc 0.42 Sqm set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed in CM (1:6) , complete all as specified and as directed.

M & L for rendering 15mm thick in cement mortar (1:4) on brickwork or concrete surface, to receive glazed tiles, complete all as specified and directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc. 6 metre mean radius, built in cement mortar CM (1:6), complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of chalk whiting, complete all as specified and as directed.

S & F in repair 100mm butt hinges medium weight medium cold rolled mild steel complete all as specified and directed by Engr-In-Charge .

S & F in repair mild steel barrel tower bolts 150 mm long of extruded section and fixed, black with bright bolt, complete all as specified and as directed.

S & F in repair mild steel sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and directed by Engr-In-Charge.

S & F in repair anodised aluminium handles 150 mm long, cast type, complete all as specified and directed by Engr-In-Charge.

S & F in repair CP towel rail, 20mm dia, D type, 60cm long, complete all as approved by Engr-in-charge.

S & F in repair bib tap, 15mm, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule, complete all as specified and as directed.

S & F in repairs 15mm dia bore stop valve, fancy type chromium plated with long shank and cup (concealed) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified and directed.

S & F vitreous China wash basin, white, flat back, size 550X400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets waste pipe and necessary fittings, complete all as specified and directed. Make:- As per approved list of make..

S & F in repairs 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed for iron pipe and fixed, complete all as specified and directed.

S & F in repairs for PVC waste coupling 32mm dia PTMT (half or full threaded) suitable for wash hand basin/sink (min wt 450 gms), complete all as specified and directed.

S & F in repairs for Tubular towel rail 600 mm long PTMT fixed with and including Chromium plated brass screws and wodden/plastic cleats (minimum weight 90 gms), complete all as specified and directed.

Supply and fix in repairs soap dish, vitreous china white of size 160 x 160 x 90 mm, complete all as specified and directed

S & F in repairs toilet paper holder of vitreous China fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed

S & F in repairs grating 125 mm dia with waste hole of PTMT, and CP, complete all as specified and directed

Supply and fix in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long as in repairs complete all as specified and directed

M & L in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm, (ISI marked) complete all as specified and as directed.

M & L for sand filling under floors or as in foundation including watering and consolidation, complete all as specified and as directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-50 Grade over 75 mm thick (1:4:8) sub-base, complete all as specified and directed.

M & L for 40 mm thick plain cement concrete (1:2:4) mix, type B-1 using 20mm graded stone aggregate as in sub-base, plinth protection etc., complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar (1:6) on brickwork or concrete surface, finished even and smooth (without using extra or cement), complete all as specified and directed.

Demolition and breaking up PVC drain pipes of 100 mm dia, set in cement mortar including bed concrete and removal of debris to low lying area of distance not exceeeding 50m, complete all as directed by Engr-in-Charge.

M & L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set and jointed with cement slurry in floors with mixture of grey white cement in equal proportion over and including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with grey cement, complete all as specified and directed.

M & L for vitrified ceramic tiles 8-9mm thick (square/rectangular) first charge polished, coloured (light shade as approved) area of each tile n.exc 0.36 Sqm , as in floors, set and jointed in neat cement slurry and pointed in white coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar (1:6), complete all as specified and directed.

S & F powder coated aluminium window and ventilator shutters fixed type, without sash bar aluminium section weighing 0.55 kg/ m including necessary jointing cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc. complete all as specified and directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, 'U' hook or 'J' bolt, complete all as specified and directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering, complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or inslulation boards/slabs/blankets of any thickness including cover fillet, complete all as specified and directed.

M & L for provision of gypsum board of 9mm thick ceiling tiles size 595 mm x 595 mm for including aluminium anodised section of size, wall angle 30mm x 25mm x 2 mm thick, main/cross tee-section 15mm x 15mm x 1.4 mm and suspended with 2.18 mm thick GI wire of suitable length and including fixed and aluminium snap grid all as per clause 10.38.1 of SSR part-I and as per manufacturer's instructions. Complete all as specified and as directed by Engr-in-Charge. Make: as specfied in List of approved makes.

S & F in repair flushing cistern low level, PVC 10 lit capacity syphonic action type, valveless dual symphonic action type, flushing cistern, low level, white, with inlet ball valve flat and handle including PVC flush pipe 32mm bore and mild steel brackets made out of 25x25x3mm thick angle iron of required size fixed to wall with PCC (1:2:4) type B0, complete all as specified and as directed.

S & F in repairs for vitreous china wash down water closet pan, 'pedestal pattern' white, with seat cover with closet pattern with flat bottom and cover mild steel chromium plated or aluminium anodised hinged device and joints etc., and connection to drain, flushing pipe, anti-syphonage pipe and fixing arrangements with fixing bolts etc., including making good the distrubed portion of floor in cement concrete (1:2:4) type (B-0), complete all as specified and directed.

S & F in repair CP hand shower (health faucet) with 8mm dia, 1 metre long flexible tube and wall hook with NRV (back flow preventor) , complete all as specified and as directed. Make: Jaquar, Cat No. ALD CHR-583 or equivalent make as approved.

S & F mild steel work as in band, straps, supports for RWP, clamps, hold fasts, wall ties, hooks & pintle hinges and similar small articles conforming to Fe-290-0 or Gde E-165, complete all as specified and directed by Engr-In-Charge.

S & F for aluminium powder coated (anodised) frame for doors, windows, ventilators of any colour as approved (Thickness of powder coating not less than 50 micron) with one or more rebates including joining cleat etc., for fixing, complete all as specified and directed by Engineer -In-Charge.

S & F aluminium powder coated, door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc, complete all as specified by Engr-in-Charge.

S & F powder coated aluminium window and ventilator shutters side hung type, without sash bar aluminium section weighing 0.55 kg/ m including necessary jointing cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading screws aluminium fittings such as peg stays 150mm long (1 No) hinge type B-21, 100 mm long (2 nos) suitable handle (1 No), etc. complete all as specified and directed.

Taking down carefully point wiring of any type (i.e on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power poiont with fittings and fixtures such as ceiling rose, electric fittngs, holders, switches, sockets, wooden batten, conduit etc., including accessories such as wooden gutties/rawl plug, screw etc, including making good disturbed surfaces to match the existing surfaces, complete all as directed.

M & L for point wiring for light point controlled by one way switch 5 Amp, 1.5 Sq mm PVC FRLS insulated unsheathed, copper conductor stranded 1100 volts grade cable including PVC casing and capping of size not less than 25x12 mm/32x12 mm suitable and conduit pipe medium grade as per site requirement, ISI marked with accessories such as tee, bend joint cover etc., round/square blocks at junctions etc., screws, gutti/rawl plug PVC, all as per site requirements including plastic terminal boxed for mounting of switches/sockets/regulator etc., and PVC FRLS insulated and unsheathed 1100 volt grade copper conductor, stranded 1.5 Sqmm, cable a continuous earth lead connected to common earth dolly, etc., complete all as specified and directed. Note: Proper colour coding to be adopted (i.e Phase-Red, Neutral-Black, Earth-green)

All as per item No. 52.00 here-in-before but for one ceiling fan/exhaust fan point controlled by one 5 Amp switch, complete all as specified and as directed.

All as per item No. 52.00 here-in-before but with socket outlet 5 Amps, controlled by one way switch on the same board.

All as per item No. 52.00 here-in-before but with one socket combination 2 in 1, 5 Amps, on independent board.

All as per item No. 52.00 here-in-before but with call bell point controlled by one way switch, 5 Amps.

M & L for point wiring for power point controlled by one way switch 15 Amp, 2.5 Sq mm PVC FRLSH insulated unsheathed, copper conductor stranded 1100 volts grade cable including PVC casing and capping of size not less than 25x12 mm/32x12 mm suitable and conduit pipe medium grade as per site requirement, ISI marked with accessories such as tee, bend joint cover etc., round/square blocks at junctions etc., screws, gutti/rawl plug PVC, all as per site requirements including plastic terminal boxed for mounting of switches/sockets/regulator etc., and PVC FRLSH insulated and unsheathed 1100 volt grade copper conductor, stranded 2.5 Sqmm, cable a continuous earth lead connected to common earth dolly, etc., complete all as specified and directed. Note: Proper colour coding to be adopted (Phase-Red, Neutral-Black, Earth-Green)

S & F switch piano flush button single pole one way 5 Amp, 230 volts, complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite 65x50 mm three terminals (ISI marked) PVC/ Polycarbonate, isolated body complete all as specified.

S & F Switch socket combination 5 pins, 5 Amp flush type, universal, complete all as specified and directed.

S & F socket outlet 3 pin, 6A, flush type socket outlet, 5 pin, 5 Amps flush type, complete all as specified and directed.

S & F Switch socket combination 2 in 1, 3 pin, 6 Amps and 16 Amps flush type, universal, 230 volts, complete all as specified and directed.

S & F bell push flush type, 5 Amp, 230 volts, complete all as specified and directed.

S & F stepped type electronic fan regulator, flush type etc., complete all as specified and directed.

S & F of surface mounted batten type LED luminaires 20 Watts, 230 V, AC on wall by stainless steel screws, rawl plug etc., and connecting upto ceiling rose with three core sheathed copper conductor cable (white/grey) colour of suitable size, complete all as specified and as directed.

S & F of surface mounted batten type LED luminaires 10 Watts, 230 V, AC on wall by stainless steel screws, rawl plug etc., and connecting upto ceiling rose with three core sheathed copper conductor cable (white/grey) colour of suitable size, complete all as specified and as directed.

M & L Sub main wiring two single core 6 Sqmm PVC insulated PVC multistanderd copper conductor cable heavy duty and one run of 6 Sqmm PVC insulated unsheathed multi stranded copper conductor cable for earth wire drawn in heavy PVC conduit not less than 25mm dia with all fittings concealed with wall and making and making good disturbed surface wall complete all as specified and as directed. Note : - Not : 2 runs of 6 Sqmm cable and 1 run of earth wire 6 sqmm shall be measured as one unit length.

S & F door bell, ding dong, AC, 230 Volts, single pole, etc., complete all as specified and directed.

S & F Single pole and neutral (SPN) enclosure, 20 Amp with a two pin and earth plug and socket, complete with one single pole MCB, etc., complete all as specified and directed.

S & F sheet metal enclosures MCB SPN distribution board 8 way double door with IP-43 IK-09 protection single phase 240 volts, including 200 Amp rated copper bus bar and neutral link (ISI marked), fixed flush in wall/surfaces, complete all as specified and as directed.

S & F 240V, 10 kA 'C' Curve miniature circuit breaker (MCB) of single pole and neutral (SPN) and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning all as specified and as directed. Make: As specified in List of Makes.

S & F 240V, 10 kA 'C' Curve miniature circuit breaker (MCB) of single pole (SP) and current carrying capacity 6 to 32 Amp in the MCB DB complete with connection testing and commissioning all as specified and as directed. Make: As per approved list of Makes.

M/s Pragland Abhiyanta

Ms Sukumar Talukdar and Co.

M/s B.M. Enterprise

M/S RUPDEEP ENTERPRISES

M/s Kajal Das

R. D. ENTERPRISE