REPAIR / MAINTENANCE OF CEILING FAN, EXHAUST FANS, WALL MOUNTED FANS AND MISC INTERNAL ELECTRIFICATION WORKS ALONGWITH PERIODICAL SERVICES TO INTERNAL SURFACES AND MISC REPAIRS IN MD/OTM ACCN AT ARMY AREA UNDER GE AVADI

Amount

Taking down carefully defective ceiling fan any capacity /Make/ Model / Size the Ceiling fan of any size/ make after disconnecting the electric connections for necessary servicing and replacing the spares, rewinding etc. and refixing the same after repair & assembling complete in same location or location directed including testing complete all as specified and directed. Note : Servicing, Spares, Refixing and Rewinding shall be measured and paid for separately.

Taking down carefully the Exhaust fan any capacity /Make/ Model / Size the Ceiling fan of any size/ make after disconnecting the electric connections for necessary servicing and replacing the spares, rewinding etc. and refixing the same after repair & assembling complete in same location or location directed including testing complete all as specified and directed. Note : Servicing, Spares, Refixing and Rewinding shall be measured and paid for separately.

Taking down carefully the Wall-mounted/ Air-circulator fans any capacity /Make/ Model / Size the Ceiling fan of any size/ make after disconnecting the electric connections for necessary servicing and replacing the spares, rewinding etc. and refixing the same after repair & assembling complete in same location or location directed including testing complete all as specified and directed. Note : Servicing, Spares, Refixing and Rewinding shall be measured and paid for separately.

Servicing the ceiling fans of any size/ make including greasing/ oiling/ repairs and replacing the spares such as cater pin unserviceable/rusted nut bolts, split pins rubber wheel bearing washers, bush , and connected items all as specified and directed

Material and Labour for painting of ceiling fans of any sweep to obtain even, smooth & glossy finish, with synthetic enamel paint of approved colour by using paint spraying devices after filling cavities with filler after cleaning all dust etc., over fan surfaces; complete including writing SM/MES No. in synthetic enamel paint (Black colour) over the same surface where the existing No. was written etc., all as specified and as directed.

Material and Labour for painting of Exhaust/ Pedestal/ Wall-mounted/ Air-circulator fans of any sweep to obtain even, smooth & glossy finish, with synthetic enamel paint of approved colour by using paint spraying devices after filling cavities with filler after cleaning all dust etc., over fan surfaces; complete including writing SM/MES No. in synthetic enamel paint (colour as approved) over the same surface where the existing No. was written etc., all as specified and as directed.

Material and Labour for rewinding of fan motor with super enameled copper winding wire of same gauge and weight after cutting and removing the existing burnt/heated up windings, including cleaning of rotor, stator and varnishing, heating and providing fresh insulating materials for Ceiling fan of 1200/1400 mm sweep including dismantling and reassembling complete all as specified and as directed.

All as per Item No.7 herein before but for Exhaust fan 225 to 300mm sweep

All as per Item No.7 herein before but for Pedestal fan 400 to 600mm sweep

All as per Item No.7 herein before but for Wall mounted fan 400 sweep

Supply only ball bearing suitable for ceiling fan of size 1200/1400mm sweep complete all as specified and as directed.

Supply only ball bearing suitable for exhaust fan of any size and make complete all as specified and as directed.

Replacement of old/unserviceable capacitor of capacity 2.5 µfd for the fans in position complete all as specified and as directed.

Replacement of old/unserviceable capacitor of capacity 4 µfd for the fans in position complete all as specified and as directed.

Supply and fix PVC canopy/Ceiling fan cap with fixing screws etc suitable for ceiling fan 1200/1400mm sweep etc., complete; all as specified and as directed

Supply and fix ceiling fan blade with fixing accesories etc suitable for ceiling fan 1200/1400mm sweep etc., complete; all as specified and as directed

Supply and fix exhaust fan blade (metal body) with fixing accessories etc suitable for exhaust fan 300mm sweep etc., complete; all as specified and as directed

Supply and fix exhaust fan louver (shutter) metal body with fixing accessories etc suitable for exhaust fan 300mm sweep etc., complete; all as specified and as directed

Supply and Fix ceiling fans down rods fabricated out of 15 mm dia GI pipe medium grade duly cutting/ threading/ drilling etc. Suitable for ceiling fans (1200/1400 mm sweep) fixed by means of check nut and split pin, 'U' clamp bolts, nuts, washers, rubber split pin check nut etc., complete, including Taking down rods of ceiling fans all as specified and as directed.

Supply and Fix check nut and split pin including 'U' clamp bolts, nuts, washers, rubber split pin check nut etc suitable for ceiling fan 1200/1400 mm sweep etc., including Taking down existing unserviceable check nuts ,'U' clamp bolts, nuts, washers, rubber split pin check nut etc., complete all as specified and as directed.

Supply and Fix ceiling fan hook made out of 40 x 6 mm MS flat iron and 10 dia MS round bar bend to shape for hanging ceiling fans including taking down existing unserviceable fan hook complete all as specified and as directed.

Material and Labur for making hole for fixing of exhaust/ventilation fan size 200 mm to 380 mm with necessary civil work as per site requirement complete making good the wall/ventilation window to match with existing complete all as specified and directed.

Replacement of existing unserviceable air fan with 200 mm dia, 900 RPM, fresh air fan with plastic louvers, frame incl necessary alteration for fixing of fan in exist window as per site requirement complete all as specified and directed.

Material and Labour for Point wiring in Existing conduit with 1.5 Sqmm (nominal area) PVC insulated,(FRLSH) unsheathed, multistranded, 1100 volts grade copper conductor cable single core, drawn through existing PVC/ steel heavy duty conduit 20 mm dia conduit including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, replaced with 1.6 mm thick MS terminal box finished to wall & 3 mm thick laminated hylam sheet top cover for one light/fan/Bell/5 Amp socket complete all as specified and directed.

Material and Labour for Point wiring in Existing conduit with 4 Sqmm (nominal area) PVC insulated,(FRLSH) unsheathed, multistranded, 1100 volts grade copper conductor cable single core, drawn through existing PVC/ steel heavy duty conduit 20 mm dia conduit including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, replaced with 1.6 mm thick MS terminal box finished to wall & 3 mm thick laminated hylam sheet top cover for 15 Amps socket complete all as specified and directed.

Replacement of unserviceable laminated hylam sheet with laminated hylam sheet top cover with brass screws, cup wahser suitable for 03/04 modules concealed box and cutting of grooves for switchs,sockets and regulator etc complete all as specified and directed.(Note: 1. Rates deemed to be included for removing and refixing of electrical point connections in switch board complete. 2. Switch,sockets,regulators to be measured and paid separately) complete all as specified and directed.

All as per Item No.28 above but 06 to 10 modules complete all as specified and directed.

All as per Item No.28 above but 18 to 24 modules complete all as specified and directed.

Supply and fix Switch piano flush type, single pole,5 Amps complete all as specified and directed.

Supply and fix Switch socket outlet 3 pin 5 amps ,multi pin, flush type,complete all as specified and directed.

Supply and fix Switch socket 3 pin 15 Amps outlet, multipurpose, flush type complete all as specified and directed.

Supply and fix ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all as specified and directed.

Supply and fix electronic fan regulator, flush type phenolic laminated sheet etc complete all as specified and directed.

Supply and fix Bell , ding-dong type , AC, 215 volts, 50 HZ complete all as specified and directed.

Supply and fix Bell push, flush type, single pole, 5 Amps, 240 volts complete all as specified and directed.

Supply and fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix LED tube light fitting 20/22 watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing accessories including taking down old light fitting complete all as specified and directed.

Supply and fix LED tube light fitting 9/10 watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing accessories including taking down old light fitting complete all as specified and directed.

Supply and fix LED Bulb 12/15 watt, B-22 base suitable for operation on AC, single phase complete including taking down old bulb complete all as specified and directed.

Supply and fix Decorative ECO bulkhead luminaire capacity 10/12W, environmental friendly ultra modern energy saving surface mounted, LED luminaire comprising of high brightness and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ including taking down fitting complete all as specified and directed.

Supply and fix LED building security light 25W, made up of pressure die cast housing with toughed glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 incuding drivers, connecter block etc complete pre wired & connecting up with suitable twin core flexble copper wire and suitable bracket all as per dirtected including taking down old light fitting complete all as specified.

Supply and fix Emergency energy saving LED Bulb 9 watt with back up up to 3 to 4 hrs, B-22 base suitable for operation on AC, single phase including taking down old bulb complete all as specified and directed.

Replacement of existing unserviceable light with Recess mounting LED backlite panel ceiling light environmental friendly aesthetically designed recess mounting luminaire with high brightness LED luminaire suitable for armstrong/grid ceiling complete for low ceiling applications 30/34 Watt LED (2'X2') complete with electronic driver, suitable for operation on AC, single phase , 220 V, including provision of suitable twin core copper conductor PVC insulated , 1100 Volts grade cables connecting up ceiling rose and fittings and testing ,complete all as specified and directed.

Replacement of existing light with surface mounting LED backlite panel ceiling light environmental friendly aesthetically designed recess mounting luminaire with high brightness LED luminaire suitable for armstrong/grid ceiling complete for low ceiling applications 30/34 Watt LED (2'X2') complete with electronic driver, suitable for operation on AC, single phase , 220 V, including provision of suitable twin core copper conductor PVC insulated , 1100 Volts grade cables connecting up ceiling rose and fittings and testing ,complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 60cm x 60cm x 3.15mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers made of copper or brass and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I (2009) complete all as specified and directed.

Material and labour for earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd 4 mm dia galvanized steel wire all as specified and directed

Taking down cement plastering of any description on brick / stone/ concrete wall / ceiling surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

Material and labour for 5mm thick rendering on concrete surface of ceiling in CM 1:3 and rendering is to be finished even smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar 1:6 on fair faces of brick/concrete on internal surfaces fininshed even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick in two layer of 5mm thick cement mortar 1:4 over 10mm thick 1:6 on other than fair faces brick concrete on external surfaces finished fair and even complete all as specified and directed.

Material and labour for applying three coats of white wash on ceiling including preparation of newly palstered surfaces complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for preparing newly plastered surfaces of wall and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Material and labour for preparation of old surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots on walls and applying one coat of white wash including cleaning the floor/joinery surfaces, glass panes complete all as specified and directed.

All as per Item No.54 above but one coat of white wash on ceiling

Material and labour for preparation of old surfaces including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil emulsion distemper on wall complete all as specified and directed.

Material and labour for prepartion of old painted surfaces of wood and wooden based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted surfaces of steel and iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Complete removal of existing treatment and preparing wall surfaces and applying two coats of oil emulsion distemper(OBD) over a coat of alkali resistant primer all as specified and directed.

Complete removal of existing treatment and preparing wall surfaces and applying two coats of oil emulsion distemper over a coat of alkali resistant primer over 2mm thick wall care putty complete all as specified and directed.

pmv.enterprises (BID ID -3093288)

SUBAMAGENCYANDCONSTRUCTION (BID ID -3083958)

muthu constructions (BID ID -3084474)

SAMYDOSS CONSTRUCTIONS (BID ID -3092597)

NAVEEN ENTERPRIESES (BID ID -3087037)